Become a fan of Slashdot on Facebook

 



Forgot your password?
typodupeerror
×
Media Movies Technology

What's the Matter with HDMI? 390

mrnomas writes with a link to the Audioholics site, which wonders why the HDMI standard is such a mess? The article's author suggests that the format was designed for the benefit of the content-producers and not the consumer. The result is a signal that's hard to route and switch, as well and unnecessarily complicated cable assemblies. They reach back to the DVI standard to see what might be done to make HDMI a little more consumer-friendly, with numerous technical elements woven through the discussion. "DVI lacked a couple of things which the consumer audio/video industry wanted. It was implemented on a variety of HD displays and source devices, but it was confusing for the consumer because of the many variants on the standard and different connector configurations, and it didn't carry audio signals. A consortium to develop and promote a new interface, HDMI, was formed; the idea was to come up with a standard which could be implemented more uniformly, was less confusing, and offered the option of routing audio signals along with video."
This discussion has been archived. No new comments can be posted.

What's the Matter with HDMI?

Comments Filter:
  • by delirium of disorder ( 701392 ) on Friday May 18, 2007 @06:10PM (#19185501) Homepage Journal
    ...what might be done to make HDMI a little more consumer-friendly?
    Drop the DRM.
    • by Tackhead ( 54550 ) on Friday May 18, 2007 @06:26PM (#19185697)
      > Drop the DRM.

      From TFA:

      an HDMI or DVI signal is a real-time, one-way stream of pixels that doesn't stop, doesn't error-check, and doesn't repair its mistakes--it just runs and runs, regardless of what's happening at the other end of the signal chain.

      Listen, and understand. The DRM is out there. It can't be bargained with. It can't be reasoned with. It doesn't feel pity, or remorse, or fear. And it absolutely will not stop, ever, until you are dead.

      • Re: (Score:3, Insightful)

        by bockelboy ( 824282 )

        an HDMI or DVI signal is a real-time, one-way stream of pixels that doesn't stop, doesn't error-check, and doesn't repair its mistakes--it just runs and runs, regardless of what's happening at the other end of the signal chain.

        This is where I stopped paying attention. Doesn't error check? He makes it sound like they just put the bits on the wire. It's at least encoded relatively well. That's even available from the wikipedia article; the video signal on HDMI is encoded with TDMS. From TDMS's wik

        • Re: (Score:3, Insightful)

          by Tim Browse ( 9263 )

          Further, why the hell would the cable to my TV not carry a one-way stream of pixels, regardless of what's happening at the other end? This isn't lossless TCP networking. You don't want to send an ACK packet for every couple pixels you get. What are you going to do? Retransmit the pixels a couple of milliseconds later? Brilliant!

          Er, maybe you should have read further after all. That's exactly the guy's point - because you don't have the luxury of being able to retransmit on error, is exactly why he's saying they should have used co-ax instead of twisted pair - did you even read the paragraph you quoted? Or any of the paragraphs before it?

    • by Mahjub Sa'aden ( 1100387 ) <msaaden@gmail.com> on Friday May 18, 2007 @06:35PM (#19185805)
      Maybe what's really wrong with HDMI is that it's yet another acronym. Call it SuperAwesomeFunPlug or something like that instead.

      Stupid boring technology companies.
      • by PayPaI ( 733999 )
        How about DisplayPort? [wikipedia.org]
      • Re: (Score:3, Funny)

        by KrancHammer ( 416371 )
        SuperAwesomeFunPlug has already been patented.

        Note:
        Do not do a google search for SuperAwesomeFunPlug if you value your sanity.

    • by Fry-kun ( 619632 )
      HDCP is bullshit, nobody really cares about it.
      It been proven to be a weak protection mechanism, just need a few more keys to break it completely.
      But even then, what the hell would you do with a 10.2Gbps stream? Hell, you won't want to directly encode a 742.5 Mbps stream either. You'll fill up a terabyte harddrive with 2-3 movies.. then what?

      I agree with you - I want the DRM gone - but I'm just saying it has little effect on HDMI :)
    • by farrellj ( 563 ) * on Friday May 18, 2007 @07:43PM (#19186483) Homepage Journal
      A friend of mine who works for a company that makes video processing and switching equipment has gone on and on about the problems with both DVI-D and HDMI is that there are very few manufactures that comply with them, and thus they are constantly having to update their processors to accommodate each different manufacturer's version of DVI-D and HDMI. It is the number one pain in their butts.

      Of the two, HDMI is worse *because* of the DRM...the timing and buffering problems are almost insurmountable with some manufactures. I'm glad I don't have my friend's coding job! It would drive me bonkers!

      ttyl
                Farrell
    • Re: (Score:3, Interesting)

      And that pretty much sums it up. Other than the DRM issues, HDMI is a solid interface (which is, of course, like the old joke about "other than that, how was the play Mrs. Lincoln?").

      A combination of DVI plus audio was pretty much a foregone conclusion. DVI had taken over the computer world in the monitor interface department, and it's competitors are fewer and fewer these days. Allowing for easier connection of computers and computer-like media devices was becoming more and more important, and DVI was t
    • what might you do? (Score:5, Insightful)

      by gd23ka ( 324741 ) on Friday May 18, 2007 @08:29PM (#19186805) Homepage
      Don't buy anything with DRM on it. Let their accountants do your talking.
      Don't hack anything with DRM on it. Don't help other people watch their crap for free.
      Don't watch anything with DRM on it. Make them afraid of losing mind share.

      Instead: Watch DRM wither and die.
      • Re: (Score:3, Insightful)

        by packeteer ( 566398 )
        The problem with the "voting with your dollars" system is that some people have more votes than others. In the democracy i live in i prefer to think everyone is equal. Its sad but true though that you ARE voting with your dollars. Everyone should keep this in mind but really the best solution is not to play the game that the MAFIAA designed.
  • HDMI (Score:5, Insightful)

    by ynososiduts ( 1064782 ) on Friday May 18, 2007 @06:10PM (#19185507)
    I always considered HDMI a anti-consumer,DRM laden, proprietary, and expensive USB cord. What's wrong with DVI? It's more compatible and I don't believe it requires any licensing to use in a product. So I ask you again, what is wrong with DVI? Why is everyone so HDMI-centric?
    • Re: (Score:3, Insightful)

      by OrangeTide ( 124937 )
      HDMI has audio and a better connector and compatibility with DVI. There are a lot of things about HDMI that are theoretically very good. but there are some problems with it that overall I think make HDMI a negative.

      The article is worth reading because it points out what's wrong with DVI too.
      • by tlhIngan ( 30335 )

        HDMI has audio and a better connector and compatibility with DVI. There are a lot of things about HDMI that are theoretically very good. but there are some problems with it that overall I think make HDMI a negative.

        Except the connector doesn't have any sort of catch. Super expensive overpriced (and unnecessary) HDMI cables can be fairly heavy, and a lot of displays have the HDMI cables running along the bottom. End result? Damn thing just falls out! At least DVI had a mechanical cinch to lock it in.

      • Re:HDMI (Score:5, Insightful)

        by TheRaven64 ( 641858 ) on Friday May 18, 2007 @06:19PM (#19185617) Journal
        I never understood the need for putting the video and audio in the same cable. The video signal wants to go to the screen, and the audio signal wants to go to the amplifier. Why does having to run the audio signal into the screen and then out again help me in any way?

        • Re: (Score:3, Insightful)

          by sarahbau ( 692647 )
          I never understood that either. I think very few people willing to spend money on an HDTV are going to using the built-in speakers on it. I suppose that will get more common though as HD becomes more main-stream, and not just for people interested in the best viewing experience. I don't buy the argument that DVI was "confusing" just because there are a couple different configurations. It's very easy to tell which your devices use. The only real down-sides I believe DVI has were carried over to HDMI, such as
          • I think very few people willing to spend money on an HDTV are going to using the built-in speakers on it.

            Ahhh... but you forget that they're trying to push everyone towards HDTV. So, all those people that don't have a home theater system but do have a TV are going to (eventually) have an HDTV; these are the people that will want a drop-in replacement and HDTV via the air (free stuff) or (maybe) cable/satellite.
          • Re: (Score:3, Informative)

            by MarcoAtWork ( 28889 )

            and not just for people interested in the best viewing experience

            you mean not just for interior designers that have no clue about what constitutes a good viewing experience? The same interior designers that are in umpteen tv shows, avidly followed by your significant others, that think that the top of the fireplace is the best place for an HDTV? That also seem to think that it's perfectly fine to connect that 52" LCDTV with an RCA coax cable displaying SDTV because they have no clue about how to actually ru

            • Re: (Score:3, Insightful)

              by sarahbau ( 692647 )
              Unfortunately most apartments and houses seem to have living rooms designed in such a way that it's impossible to place a TV. I guess real A/V philes would have a windowless room with nothing but the TV, sound system, and reclining chairs with cup holders built-in to the arm rests, but some people can't afford that. lol. Whenever I move to a new place, I always consider TV and speaker placement above all else in the living room, but normally I have to make some sacrifices. My current apartment is designed s
            • Re: (Score:3, Funny)

              by el_gordo101 ( 643167 )
              Ha! You just described my brother's setup perfectly. His wife thought that hanging the nice new LCD screen above the fireplace was just spiffy, because some boob on HGTV said it was the way to go. The one smart thing we did was to rip a hole in the wall and run the cables from the back of the TV to a media cabinet in the corner (two HDMI, Component, and speaker cables). We also added an empty conduit for future expansion. Bottom line, this beautiful screen that cost him over $2K gets covered in soot ev
        • Re:HDMI (Score:5, Insightful)

          by Lehk228 ( 705449 ) on Friday May 18, 2007 @06:32PM (#19185777) Journal
          because a huge number of screens also have speakers in them, and those speakers are used in place of a more expensive sound system.

          if a sound system is used, it's still better to route the signal through the TV so you can control the volume with the same remote as the TV.


          personally i would prefer a communication standard so the TV could tell the amp to lower or raise volume, and the sterio could send a menu interface to the TV for controls, but that will probably never happen since every manufacturere will want to do it "their" way.
          • Re:HDMI (Score:4, Insightful)

            by DragonWriter ( 970822 ) on Friday May 18, 2007 @06:36PM (#19185815)

            if a sound system is used, it's still better to route the signal through the TV so you can control the volume with the same remote as the TV.


            Why? If you are using an external audio/video source, then other than for turning the TV on or off, the remote you want to use is the one for that source. Or you'll be using a universal remote that also controls the sound system. In either case, there is no particular reason to want to use a TV-specific remote to control the sound volume for sound from an external source being played through a sound system.
            • Re: (Score:2, Insightful)

              by scatters ( 864681 )
              Absolutely - get yourself a good universal remote, like the Harmony 870 which is activity-centric rather than device-centric, and which device you use to control volume become moot. I'm pretty sure though that the circuity in a decent amp is better than that in a TV, so there's a principle at stake here...
              • Re: (Score:3, Informative)

                by Lumpy ( 12016 )
                Um no. you want a GOOD remote not a harmony or pronto.

                get a universal MX-900 or a MX-950 or if you like flashey color displays and spending money get a MX-3000 color remote.

                Those kick the crud out of the harmony, sony, merantz, pronto and other consumer remotes hands down. Plus you can get the RF gateway and hide all your gear behind doors or in a different room easily.

                Dont get a harmony, you cant do decision based macros or variable tracking in them.
          • by BKX ( 5066 )
            Sounds like you've never owned a nice sound system. In a proper system, the sound will stay at line level (or, better yet, in digital form) until it gets to the receiver. The receiver has the only volume control that will do anything. Fortunately, nearly all expensive sound systems come with universal remotes that would make your PDA jealous. I've even seen remotes with built-in 2.4GHz LCD monitors and speakers so you can keep watching on the can.
          • by Lumpy ( 12016 )
            personally i would prefer a communication standard so the TV could tell the amp to lower or raise volume, and the sterio could send a menu interface to the TV for controls
            Hell will freeze over before that happens. as a professional integrator manufacturers like to screw with that stuff just for the fun of it. 2 Dvd player that are the SAME MODEL but different revisions have different control structures.

            I personally want to go and beat to death every engineer at sony, pioneer, kenwood, LG and Samsung. ther
          • personally i would prefer a communication standard so the TV could tell the amp to lower or raise volume

            In addition to what other /.ers said, there's also a way that is hugely popular both on Linux DVR/HTPC boxes, on some high end box (Nad does it) and on some "get the signal on the other side of the apartment" installations (to share 1 satellite receiver for the whole house for example) :

            They are equipped with an infrered emitter in addition to an infrared sensor.
            Whenever the device (Linux box, Microwave w

        • Re:HDMI (Score:5, Informative)

          by pe1chl ( 90186 ) on Friday May 18, 2007 @06:37PM (#19185823)
          A screen that does video processing often has some delay. Feeding the audio through the screen (even when you want to send it to a separate amplifier) has the advantage that the audio can be delayed by the same amount, so it is kept lip-sync.
          When you feed audio to an amplifier and video to a digital TV separately, you will often find that the audio is visibly ahead of the video.
        • by Buran ( 150348 )
          What's stopping you from running cables from the tuner/receiver/dvr/whatever to your speakers directly? That's what I've done. One HDMI cable for video only plus separate audio cables isn't any different from one DVI/component/whatever cable plus a separate audio cable. You still have to run two cables no matter what.

          I have my TiVo Series 3 connected to my TV via HDMI and cables going from the TiVo to one set of inputs on my speakers. My DVD player is connected by component to the TV and by another audio ca
        • Re:HDMI (Score:5, Insightful)

          by Logic Bomb ( 122875 ) on Friday May 18, 2007 @06:38PM (#19185849)
          Many HDMI cables will not be routed to a TV. They'll be routed to a receiver, which acts as a convenient switch for multiple video/audio sources. Many people who are buying HD TVs probably have a DVD player, a video game system, a digital cable box, and who knows what else. With audio and video on the same cable, each component needs only a single cable to the receiver.
        • Re: (Score:2, Insightful)

          The reason to combine audio and video in one cable is: fewer cables.
        • Re: (Score:3, Insightful)

          by Anonymous Coward
          Because if you want to encrypt the video AND audio to digital restrictions manage, it's a lot easier to deal with if you've only got once combined set of endpoints for both streams - they're notionally one combined, scrambled stream even if they're not really. HDCP is already a confusing waste of time - imagine the chaos if the audio destination was a different device to the video destination, and provision to negotiate two sets of keys for every connection was required.

          In short - it's to make life easier
        • by Idbar ( 1034346 )
          I guess it make sense with so many people complaining about having large amount of cables, and paying ridiculous amounts of money for audio + video + S-video + anything else. Because you can go to BestBuy and see how some guys working there don't even know what cables are used for what. So dad goes home and find several RCA connectors and S-video (probably well labeled), but don't now what should be connected and where.

          So I guess for simplicity, you can take both video and audio in the same wire, you just
        • Re: (Score:3, Informative)

          by OrangeTide ( 124937 )
          Your audio system doesn't switch video inputs for you? weird.

          hdmi seems like a nice connector for outputs, maybe not inputs. like for DVDs, cableboxes, game consoles, media centers, etc. my TV set lets me plug in stuff into it and then will redirect the digital audio (or line-level audio) through an audio monitor port that i can then plug into an simple amplifier setup.

          people with fancier AV systems can adjust volume and switch inputs of audio and video through the AV itself. and push out amplified signal t
        • Re: (Score:3, Interesting)

          by vbwilliams ( 968304 )
          Less cables. Duh. Why would you want MORE/BIGGER cabling when you can funnel the stuff through the same media and just be done with it? Aside from the DRM concerns, I actually LIKE HDMI...it's just much easier to deal with. Likewise, finding receivers now with enough HDMI inputs vs component inputs is just a hell of a lot easier, just because of space alone. If it weren't for my Playstation 2 at this point requiring component or composite instead of HDMI, my system would be 100% HDMI, and I'd have a bi
          • DRM (Score:3, Insightful)

            by remmelt ( 837671 )
            And here, ladies and gentlemen, we see why DRM does not fail as hard as we would like. The parent knows about DRM and its implications, is technically savvy enough to post on /., has the money for various consumer devices, agrees (twice) that HDMI is bad because of DRM...

            and yet, because of less cable clutter behind the TV, still gets HDMI connectors.

            Any questions?
      • HDMI has audio and a better connector

        By "better" do you mean unnecessarily big and heavy? I'm really satisfied with having my audio in a separate stream, thanks very much. How often is the device on the other end of the cable going to deliver both sound and video? In my house, the video goes one place, the audio another. One goes to the eyes, one goes to the ears. And the eyes are on the front of the mount (my head) and the ears are on the sides.

        No, HDMI is all about DRM, just like almost every techno

    • HDMI is pretty much the same standard as DVI, cobbled and thrown together extremely badly - with all the same problems. They work on the same principle, the net effect being that it has a lot of problems with cables of any real length. With DVI this wasn't so much of a problem, because it was mostly just used to connect monitors and computers together. However, HDMI needed to be so much more than that - and they ballsed it up. HDMI is basically a reinvented DVI thrown together as a knee-jerk reaction to clo
      • yeah; when I wanna see audio I drop acid. No DRM...
      • by Buran ( 150348 )
        Not everyone wants to rip everything. A lot of people just want it all to work as designed and have less cable clutter. I have a cable rat's nest behind my computer even though I've tried to use cable ties to organise the mess, and another rat's nest in the living room behind the TV. Instead of having to have separate cables for everything, I'd rather have unified cables -- although, as someone said in another post, the ability to clamp or screw the HDMI cable to the socket would be nice. I used a cable tie
  • by rueger ( 210566 ) on Friday May 18, 2007 @06:11PM (#19185515) Homepage
    What we need is an Open Source standard for connecting audio and video devices. That way every piece of gear would have a consistent interface and connections, and it would be easy to configure and understand.

    Especially for people without specialized technical expertise.
  • DRM it is. (Score:5, Insightful)

    by fyngyrz ( 762201 ) * on Friday May 18, 2007 @06:12PM (#19185531) Homepage Journal
    ...see what might be done to make HDMI a little more consumer-friendly

    The first thing that needs to be done is to create legislation that makes DRM illegal. This would remove the threat that HDMI poses to other technologies (such as component) and force it to compete on technical merit. Not to mention solve a lot of other consumer issues.

    The second thing to be done - obviously - is make a single standard and stick to it; however that requires cooperation among the manufacturers and seems unlikely at best. Still, we can always ask them nicely, and follow up by voting with our wallets.

    HDMI has been a nightmare for me. I started out with a hi-def (I thought) component video system, fully capable of 1080p bandwidth-wise and full of switching capabilities I liked and thought could take me quite some distance down the road; then the collusion between manufacturers not to provide full hi-def on component, but only on HDMI, came about, and there went that investment out the window. That system can only do 720p now (I find 1080i to be useless - part of the point was to get RID of flicker) and it lives in my basement. I had to re-buy my theater system, invest in a bunch of new cabling to reproduce signal routing I already had in place that was perfectly adequate, technically speaking... man. That was one irritating evolution.

    Also, I have yet to see a single home theater receiver that has a reasonable number of HDMI inputs. HD-DVD. Blue-ray. PS3. a new XBox 360. A computer. A camera. That's six, even if you only have one of each. And you need lots of component, S-Video and composite inputs with up-conversion; as well as standard audio, coaxial digital and optical digital... just because HDMI canwant it to. There are plenty of older tech gadgets out there that could still be very reasonable assets to such a system but need other types of inputs. So far, typically you find 2 or 3 HDMI inputs on a higher end theater system.

    • by fyngyrz ( 762201 ) *
      just because HDMI canwant it to

      ...was supposed to read: "just because HDMI can carry audio doesn't mean I necessarily want it to."

      My apologies.

    • PS3 and HDDVD? That's redundant.

      Same with xbox360 and HDDVD...
      • by fyngyrz ( 762201 ) *

        PS3 and HDDVD? That's redundant.

        Same with xbox360 and HDDVD...

        Not at all. Just as I don't use my computer's DVD drive to watch DVDs because I want its useful lifetime to be spent dealing with software, similarly, I want my PS3 drive's life-span to be spent reading game disks, and my HD and Blue-ray players playing the entertainment disks. I don't even have an HDDVD drive for my 360, nor do I want one, so it isn't an option.

        I have already seen DVD player, PS1 and PS2 drive lasers die; they all hav

      • by rlp ( 11898 )
        PS3 and HDDVD? That's redundant.

        Yes, and no. PS3 has built-in Blu-ray. An HD-DVD player gives you the other competing high-def (incompatible) format. That way you can watch films regardless of which format they're released in (and some are exclusive to one format).

        Me, I'll stick with DVD for now.
    • Re: (Score:2, Insightful)

      by DittoBox ( 978894 )
      I invite you to write some legislation that makes DRM illegal without making encryption altogether.

      Slashdotters of all people should know magical laws don't exist. I hate DRM with a real passion but writing a law like that will prove next to impossible. What happens if an artist is working on a piece and wants to encrypt it for his own use? What about devices that automatically encrypt everything? There's tons of original content being encrypted there to keep people from copying it an using it "without perm
      • Re:DRM it is. (Score:4, Insightful)

        by dgatwood ( 11270 ) on Friday May 18, 2007 @07:00PM (#19186079) Homepage Journal

        It's actually really easy to construct such a law. Write it in terms of the effect on commerce, not based on the technological aspects. I can do it with a single, one-line change to Title 17:

        It shall be illegal to design or use any technology in such a way that it denies any legitimate purchaser of any audiovisual or software product any rights to which they are entitled herein, including but not limited to the fair use rights described in Title 17, Chapter 1, Section 107.

        That's all it takes. No mention of encryption anywhere in it. By writing it in this way, it goes beyond encryption to include ALL DRM technologies from encryption to an autorun disk driver installer, and does so in such a way that specifically limits its impact to the consumer rights prescribed in the copyright act and has no impact on encryption whatsoever. If a particular use of encryption (or anything else) fails the fair use test, it is illegal to use it for that purpose. It's that simple.

        Now getting Congress to be smart enough to pass such a simple, clean bill without ten thousand riders attached to it that do all sorts of nasty things is another issue, but....

        • Re:DRM it is. (Score:4, Insightful)

          by cfulmer ( 3166 ) on Friday May 18, 2007 @08:04PM (#19186669) Journal
          HA!

              First of all, there are no such thing as "Fair use rights." Fair use is a defense to copyright infringement; it is not a stand-alone right. (Don't believe me? Go look up Section 107 yourself.)
              Second of all, "It shall be illegal to design . . . ." Is this really what you want?
              Third of all, herein WHAT? Herein title 17? Herein Chapter 1?
              Fourth of all, you haven't defined what an "audiovisual" or "software" product is. Does it include CDs? What about soft copies of books? Does it include still pictures?

              But, most importantly, Section 17 doesn't grant individual purchasers ANY RIGHTS. So, the phrase "any rights to which they are entitled herein" is empty. (This isn't completely true, but is true enough for what you're thinking.)

    • Since I have an older HDTV with component inputs I've stayed in that world, avoiding HDMI. Boy am I glad I did, it sounds like an interoperability nightmare. I've particularly seen it with the Apple TV, where many people have problems hooking it up via HDMI to various TVs. I've personally had no problem using component and have not seen anyone complain about problems with component on the Apple TV forums. HDMI might be better on paper, but in the real world HDCP (or something) has made HDMI a real frustrati
      • by fyngyrz ( 762201 ) *

        I agree, component "just works" and it works really well. It also allows routing of the audio any way you like — as audio has nothing to do with component — so as to enable all manner of audio and image flexibility. I was really disappointed that the industry turned away from component, quite aside from the inconvenience and financial hit I ended up dealing with.

      • by fyngyrz ( 762201 ) *

        Also, just in case you've been considering a PS3, be aware that the PS3 does Blue-ray progressive scan in 480p max over component. So you get about the same image you would from a DVD. Games are presented in component 720p, however, and they look outstanding.

  • by croddy ( 659025 ) on Friday May 18, 2007 @06:16PM (#19185571)

    The article's author suggests that the format was designed for the benefit of the content-producers and not the consumer.

    In other news, the Pope reveals he is Catholic, and prominent climatologists describe the sky as "blue".

  • by JohnnyComeLately ( 725958 ) on Friday May 18, 2007 @06:17PM (#19185579) Homepage Journal
    We commonly get asked, "Whats the difference between HDMI and Component?". Our answer (tongue in cheek) is, "About $20 a foot". I bought a 1080i LCD Sony Bravia HDTV and I got a DVD at the same level. When I got to interconnect cables, I saw $30 for a reasonable set of Monster component cables. The no-brand HDMI 3 foot cable was $90. It's silly if you think about it. OK, supposedly there's a sync difference and the "transmission is faster" for HDMI, but last I checked, component video hasn't had a lag problem in anyone's home theater I've seen. You can send 1080p just fine over component, and not be worried about anything holding your performance back. This is why I laughed at the XBOX360 HDMI only output....please...when will manufacturers figure out that when you limit choices it just pisses people off?
    • by tbo ( 35008 ) on Friday May 18, 2007 @06:52PM (#19185993) Journal
      As a physicist, it drives me nuts how much people are willing to pay for Monster cables or other "high-end" stuff. Need speaker wire? Just buy some heavy-gauge electrical wire. Home Depot sells 500 feet (152 m) of stranded 2-conductor 10-gauge (2.588 mm dia.) wire for about $85 USD. A similar length of thinner 12-gauge (2.053 mm dia.) Monster wire would cost a small fortune.

      Some of you may note that, at 20 kHz (high end of human hearing range), the skin depth of copper is only about 0.47 mm, and so for high frequency, your conductivity will only scale with wire circumference, not area. That's true for solid-core, but keep in mind the Home Depot cable I mention is stranded, and has a 25% larger circumference than the Monster stuff. That should be more than enough to make up for any slight resistivity advantage the Monster cable might have from using purer copper (assuming they do).

      What's really funny is the people who assume all this stuff matters for digital signals (as I saw in a few of the "reviews" on the Monster website). Unless you're stringing really long cables or your no-name stuff is really, really bad, there won't be a difference. Bits are bits, and small amounts of analog noise will be ignored.
      • As a physicist, it drives me nuts how much people are willing to pay for Monster cables or other "high-end" stuff. Need speaker wire? Just buy some heavy-gauge electrical wire. Home Depot sells 500 feet (152 m) of stranded 2-conductor 10-gauge (2.588 mm dia.) wire for about $85 USD. A similar length of thinner 12-gauge (2.053 mm dia.) Monster wire would cost a small fortune.

        It depends on the cable function. Speaker cables are a pretty undemanding application. There is often quite a difference at the low e

      • by JohnnyComeLately ( 725958 ) on Friday May 18, 2007 @07:22PM (#19186315) Homepage Journal

        Yep, you hit the nail straight on the head. I laugh at the amount of money wasted, but it's all marketing. The best example my marketing professor gave me was toothpaste. Go look at a supermarket aisle for toothpaste. You've got about 3 or 4 DOZEN brands of the same stuff....some has crystals, other baking soda, but it's all just paste.

        At home depot there's simple example of what you describe. Look at the 2 conductor, 16 or 18 gauge lamp cord. Now look at the 2 conductor, 16 or 18 speaker wire. Huge difference in price. It's still copper stranded wire of the same quality and I'd almost argue the insulation is BETTER for the cheaper lamp cord.

        I have always known it, but I had the advantage of growing up with an avionics mechanic. My dad wired planes for AA for over 37 years before retiring. He told me how small a gauge it took to reliable send signals all over a huge aircraft and meet strict FAA specs...so I quickly figured out (plus he'd laugh at the money I wasted as a teenager in the car audio scene) it was overkill. If you can ARC weld with 0 gauge, you really don't need it for your 500 watt stereo amp.
      • Re: (Score:3, Interesting)

        by networkBoy ( 774728 )
        Not entirely true.
        While I agree digital is digital, and as such analog artifacts are largely ignored, there is a specific issue with HDMI, namely inter-lane skew.

        DVI/HDMI video is three data pairs on a 100ohm differential line and one differential clock.
        If the analog artifacts (specifically capacitance and uneven cable lengths) are bad enough the "eye" of the differential signal may close to the extent that the op-amp at the receiver may not be able to sense and output a clean signal. Further damage to the
        • by tbo ( 35008 ) on Friday May 18, 2007 @08:47PM (#19186905) Journal
          While I agree digital is digital, and as such analog artifacts are largely ignored, there is a specific issue with HDMI, namely inter-lane skew.

          My point was that small amounts of analog noise on a digital signal have no effect. It's of course true that beyond a certain threshold, serious signal degradation occurs. In other words, digital signals are fine until they're not. If it's not immediately obvious that your digital signal is degraded, it's probably fine.
      • by IntelliTubbie ( 29947 ) on Friday May 18, 2007 @09:00PM (#19186977)
        I'm personally a big fan of the gold-plated optical connectors. What, are you worried that the photons are going to corrode?

        Cheers,
        IT
    • by DrXym ( 126579 ) on Friday May 18, 2007 @07:23PM (#19186337)
      The no-brand HDMI 3 foot cable was $90.

      You can buy a 3ft HDMI cable for something like $4, 6ft for $6. Yes you can buy some ludicrously expensive HDMI cables but you can blame consumer ignorance and retailer greed for that. There is no reason to spend that much seeing as it is digital.

      I see no reason at all to use component in an everyday situation if your device (be it a 360, PS3, DVD player etc.) and TV both support HDMI. It would be as dumb as connecting your PC to your monitor with VGA even when both have DVI-D support. The picture quality is far better over HDMI / DVD-D because it's digital. Analogue by definitiion degrades so even the best composite signal will still be worse than HDMI.

  • by rthille ( 8526 ) <web-slashdot@ran g a t .org> on Friday May 18, 2007 @06:18PM (#19185599) Homepage Journal
    Are all dead to me. That's right, they skipped right past being put "on notice".

    Get rid of the DRM, work out a _single_ rational standard for the cables and the disks, and I _might_ be interested in HDTV. Until then, I'll just keep ignoring it and pay attention to the _content_, rather than the presentation.
  • by segedunum ( 883035 ) on Friday May 18, 2007 @06:20PM (#19185627)
    There was one sole reason why HDMI was cobbled together, and that's because all sorts of executives were jumping up and down like jibbering idiots about, as they call it, the analogue hole. Yes, we all needed more bandwidth, but that just wasn't the primary reason.

    Pop that together with a cable standard that HDMI are bunging more and more stuff down without doing anything, and you've got an unreliable and worthless pile of junk. The article mentions cables of lengths 50 to 75 feet, but it's a sad day when you've got to limit yourself with a shiny new technology to a run length of a few inches. Oh, and get with the program people, wireless is the way things should be heading. Where the hell is this digital home I've been hearing so much about? It's a joke. Yes, there are new HDMI cables in the pipeline, but yet again, they're going to be ridiculously expensive. No thanks.
    • by raddan ( 519638 )
      The irony about all the fuss over the "analog hole" is that many, if not most, pirated DVDs are probably made straight from the digital source. It has been trivial to bypass CSS for a long time, and it was what I'd consider to be "not difficult" to do even before libdvdcss was available.

      But "closing the analog hole" was something that every media/hardware CEO could get on board with. It ostensibly makes copying harder, which makes the media companies happy, and it drives new hardware sales, especially amo
  • by rollingcalf ( 605357 ) on Friday May 18, 2007 @06:30PM (#19185747)
    The HDCP copy protection crap is what causes HDMI devices to have trouble communicating with each other, especially if there is anything between the source and display devices, like an A/V receiver or HDMI switch box.

    They are too stupid to realize that pirates aren't going to copy shows and movies by capturing uncompressed frames coming through the cables; they're going to make copies of the discs. But they insist on making the honest customers suffer through the slow cryptographic handshake that occurs any time you switch on an HDMI device or even switch sources on a TV.
    • In addition to HDCP the problem with the new digital connectors (HDMI and even the older DVI) is that, unlike analog component or S-Video inputs, you could not use them in "pass through" mode. In my case, I am still lucky that most of my sources still sport analog outputs. That means I could still connect, say the Cable box to my Slingbox and stream content to my PC, at the same time the HDTV is still connected, via a passthrough, to the Cable box. This allows watching the HDTV and streaming video to the LA
    • by Stripe7 ( 571267 )
      At one point the US government severely restricted the import/export sales of any kind of encryption hardware/software. I guess they must have decided that money talks and selling that technology, in fact having China manufacture most of it is now no longer a threat. I am surprised the encryption hardware used in these devices are not cataloged as munitions by the US government.
    • I would say HDCP is a far far bigger problem than HDMI for two reasons:
      1. Most people aren't aware that it exists. This is a big problem since most computer monitors don't support it. Dell only came out with HDCP capable flat screens late 2006! Anyone buying Vista or a new computer hoping to install a HD-DVD in it will probably not be able to get it to work because....
      2. It has many of the same issues mentioned above that HDMI has: hodge-podge of rules and standards that result in components not being ab
  • Typical slashdot. (Score:2, Informative)

    by ichigo 2.0 ( 900288 )
    TFA states that the reason HDMI sucks is that it was based on the DVI standard. Then the summary goes on to say that "They reach back to the DVI standard to see what might be done to make HDMI a little more consumer-friendly, with numerous technical elements woven through the discussion." In addition, this whole article is pretty much about why twisted pair sucks for long cable runs compared to coaxial, and in the end of the article they advertise their new HDMI-cable whose pairs are molded together instead
  • The problem is... (Score:4, Interesting)

    by Cadallin ( 863437 ) on Friday May 18, 2007 @06:52PM (#19186005)
    HDMI was not designed as a solution to an engineering problem. It was designed as an anti-consumer technology in the first place. Which is the entire problem. HDMI was designed from the ground up to be a DRM crippled interconnect. This gives rise to a number of paradoxes about the connection.

    Why would you want audio and video in the same cable? Especially for expensive systems where HDMI is common now. Is anyone with a >$1000 display actually using built-in speakers? If so, what's wrong with you? Go get some decent speakers.

  • There is an alternative: it is called Display Port. Check it out: http://www.gnss.com/tch_display_port.phtml [gnss.com]

  • I just got an HDTV two weeks ago. Before I even ordered the set I shopped around for whatever cables I might need. Lots of people said: "Expensive HDMI cables are for suckers! It's a digital signal, not analog. It won't degrade due to connections or material, so any old HDMI cable is as good as the best." So I felt comfortable buying a couple of no-name cables for $3.00 each.

    Does the analysis in this article mean that cable quality actually does matter? It doesn't make a difference to me right now -

    • by DrXym ( 126579 )
      Cable quality matters in so far as a cable must meet its technical requirements. But all HDMI cables do meet their requirements. Most HDMI cables under 6ft would even do 1080p with no trouble. A $6 HDMI cable does exactly the same job as a $100 monster cable. Bits are bits. The data either gets from one end to the other or it doesnt.

      The slightly bizarre part is when someone disagrees and claims Monster is better somehow even though they're probably typing their retort on a computer with generic SATA / IDE

  • Has any digital product in the last 10 years been designed to be 'consumer-friendly'?

    Did you just beam in from outerspace or something?
    • Re: (Score:3, Interesting)

      by Opportunist ( 166417 )
      Linux Distributions? They got more and more consumer friendly with every incarnation. When I think back to the mid-90s distris...
  • Fiber (Score:5, Insightful)

    by markdavis ( 642305 ) on Friday May 18, 2007 @07:47PM (#19186527)
    The simple fact is that the ONLY choice for HD digital video transmission SHOULD have been fiber optic:

    1) With two fibers in a cable, there would be more than enough bandwidth for 1080P + digital surround sound. It is future proof.
    2) It is fully bidirectional, which can be useful for error correction or detection, or for signal confirmation, or perhaps for two-way audio/video.
    3) It can operate at great distance.
    4) The cables would be FAR cheaper than the extremely complex and expensive DVI/HDMI cables.
    5) With serial transmissions over a single pair, the encoding could be changed at any point in the future for different formats.

    Let's look at the author's problems with twisted pairs and what it would mean with optical:

    1) Time- not a problem, because it is all serial
    2) Resistance: fiber has none
    3) Skin effect: fiber has none
    4) Capacitance: fiber has none
    5) Impedance: fiber has none
    6) Crosstalk: fiber has none
    7) Inductance: fiber has none

    Lets add

    8) RFI: fiber has none
    9) Signal leak (causing potential interference with OTHER devices): fiber has none
    10) Cable thickness: fiber would be 6+ times narrower and easier to route and hide
    11) Connector size: perhaps 4 times smaller with fiber? (Think handhelds, laptops, etc)

    When I first saw DVI, I thought the designers had gone insane. WHO CARES about analog signals? We already have PLENTY of cable standards for that (VGA, Component, SVideo, Composite)! It looks tremendously complex and overkill to relay a stream of information THAT IS ALREADY being delivered serially over the air, from DVD's, from tuners, from ANY source. Then they "fixed" it with HDMI?? Right- make the connector IMPOSSIBLE for anyone to ever make their own or repair, add audio, and ignore all other issues (oh, and the cable costs are even more expensive than the already expensive DVI). Then to have to throw "dual link" into the mess because the "standard" set of over a dozen wires doesn't have enough bandwidth...

    About the only negative with fiber is that you can't kink the cable and expect it to survive. I say "small price to pay". Oh well, maybe the next revision they will wake up??
  • SDI (Score:4, Informative)

    by Detritus ( 11846 ) on Friday May 18, 2007 @07:54PM (#19186597) Homepage
    The solution for all these problems already exists. It's called the Serial Digital Interface [wikipedia.org]. It's simple, cheap, and works over a single high-quality coax cable. It's used in professional video applications like television production and broadcasting. It doesn't do DRM, which I consider a feature. If you need to make a cable, just buy some Belden 1694A and a pair of 75-ohm BNC connectors.
  • by Quiet_Desperation ( 858215 ) on Friday May 18, 2007 @10:44PM (#19187653)
    ...where it just used to be annoying. I know engineers and scientists and other smart folks who have avoided HDTV so far because of all the nonsense. It's bullshit. They took something simple and made a complete mess out of it. I love the early adopter horror stories, like people who bought sets that only do 480p and 1080i, and are faced with 720p/1080p game consoles. Or video game lag, and the TV manufacturers going "Duuuuuuuuh, video lag is a problem? Video games? Never heard of them! Wazzat? Duuuuhhh." The there's HD-DVD versus Blueray, or Blu-Ray, or Blooraye or whatever the fuck they named it. Plasma sucks. LCD sucks. DLP is sort of cool, but then you have to buy new bulbs at ass raping prices that make the printer ink market look charitable. Seriously, has there EVER been a clusterfuck like this in the history of consumer electronics? I've never seen such a mess, and I remember the first color TVs.
  • FSM (Score:3, Funny)

    by scooter.higher ( 874622 ) on Saturday May 19, 2007 @01:00AM (#19188349) Homepage Journal
    Reading through this made me realize that everyone is not really getting it...

    These "cables" that we are using to connect devices are really just noodly appendages. Before you can truly understand how these noodly appendages work, you must embrace the FSM, and make Him a part of your life.

I tell them to turn to the study of mathematics, for it is only there that they might escape the lusts of the flesh. -- Thomas Mann, "The Magic Mountain"

Working...