Right-to-Repair Law To Get DRM Out of Your Car 403
eldavojohn writes "Ralph Nader's back to hounding the automotive industry ... but it's not about safety this time, it's about the pesky DRM in your car. Most cars have a UART in them that allows you to read off diagnostic codes and information about what may be wrong with the vehicle so you can repair it. Late model cars have been getting increasingly complex and dependent on computers which has caused them, as with most things digital, to move towards a proprietary DRM for these tools, diagnostic codes and updated repair information. This has kept independent auto-shops out of the market for fixing your car and relegating you to depend on pricier dealers to get your automotive ailments cured. The bill still has a provision to protect trade secrets but is a step forward to open up the codes and tools necessary to keep your car running."
Prediction (Score:5, Funny)
Ralph Nader will find a way not only to fail at getting DRM out of cars, but it will somehow result in more DRM everywhere else. Florida will be involved in some way.
Yeah, I'm still somewhat bitter at Ralph Nader, why do you ask?
Re:Prediction (Score:5, Insightful)
Don't blame Nader, blame your lousy voting system that discourages a third party from forming. Your voting party system is only one party better than the Communism your country hates.
Captcha was: protest
Re:Prediction (Score:5, Insightful)
Don't blame Nader, blame your lousy voting system that discourages a third party from forming. Your voting party system is only one party better than the Communism your country hates.
Captcha was: protest
I think the ideal would be for candidates to run as individuals with no such thing as a political party. Then, y'know, people might actually have to think about what the individual candidate stands for (or claims to stand for anyway) rather than reducing voting to the 50/50 chance of "is he a member of my party?" Then the next step would be to get rid of the concept of politicians and return to the concept of the statesman.
If anyone is aware of any writings the Founding Fathers have left behind about political parties in general I'd appreciate any reference you can provide. Ok, mod me off-topic now if that makes you feel better.
Re:Prediction (Score:5, Interesting)
That said, it's still Nader's fault, because despite the faults of the US voting system, Nader knew those faults, and knew exactly what he was doing. He thought that getting more funding for his party was worth 4 years of George Bush and as I recall he didn't even get enough votes to get the extra funding anyway so he shafted us, and everything he stood for for 8 years to prove a point.
Re:Prediction (Score:5, Insightful)
Re: (Score:3, Insightful)
Not all Nader voters needed to feel that way. Only a signficant fraction of the ones in Florida needed to.
Re:Prediction (Score:4, Insightful)
No, I'm making the bold assumption that electing Al Gore is a different (and better) outcome than electing W. I think history has proven that we would have been better off if the President had been choosen entirely at random (or was a random "yes/no machine").
Anyone who frames an election in terms of a "democrat" vs. a "republican", and yet somehow denegrates the two-party system as limiting choices or thought among the voters, is ridiculously inconsistent.
That said, I do think that Nader voters thought "Heh, there's no difference between a generic democrat and a generic republican, so I shouldn't look at the individual people running." Those people are morons.
Nader voters who refused to vote for Al Gore hated the player, not the game.
Comment removed (Score:5, Interesting)
Re:Prediction (Score:5, Insightful)
And the idea of any political party having that type of power should be giving you nightmares.
Re: (Score:3, Interesting)
You (or at least a large majority) of the voters voted for them.
Why should it give you nightmares? Do you really want politicians to sit there and debate about everything and not actually get anything done?
Re:Prediction (Score:5, Insightful)
Do you really want politicians to sit there and debate about everything and not actually get anything done?
Yes.
Re:Prediction (Score:4, Insightful)
Why should it give you nightmares? Do you really want politicians to sit there and debate about everything and not actually get anything done?
Your reasoning is an example of a 'false dilemma'. Lawmakers and members of the executive branch should debate everything AND get things done.
'Getting things done' without the possibility of debate is dictatorship.
Re: (Score:3, Interesting)
The technology is there, people are going to game the system no matter what, arguably it can be made harder by an impartial computer than with bribable humans...
Re:Prediction (Score:5, Insightful)
in Socialist Europe, 60-70% taxation.
Here on the Left coast, we're already there...
California state income tax is ~10%, California sales tax is 9%, Federal income tax is 36%, SSI 6%, Medicare 2%, plus all the little add on stuff to the phone bill, electricity, vehicle license fee.
Except that my RSU stocks are taxed at 70% of value the day they are granted. So they are basically worthless... (RSUs are Registered Shares that high tech workers now get instead of options, thank the Carpenters Union)
A friend of mine lost his house over RSUs, he did not unload them when he received them. In the 2001 crash, they went from $70 to $13, and the tax bill was 70% of $70, so he had a tax bill of $49 on an asset worth $13. Multiply this by a few thousand RSUs.
The tax man was less than sympathetic.
Re:Prediction (Score:5, Insightful)
Because he thought he'd make it big. He'd not be complaining if they went from $70 to $200. He took a gamble, and he lost. He was, or should have been, aware of the risks.
Honestly, neither am I. The stock market is not a zero risk endeavor.
Re: (Score:3, Insightful)
I bet he wouldn't be arguing that he'd owe tax on the ent
Re: (Score:3, Informative)
Where is that?
It's sure as hell not the UK, or France. Heck, not even the scandinavian countries hit 60%.
Re:Prediction (Score:5, Insightful)
How the hell can you blame a guy for running for president when it was the *millions* of other people who voted for the guy who was actually elected? Or are people not suppose to vote for the guy who they feel is the most qualified? When did casting a ballot equate to throwing away your vote if your guy doesn't get elected?
What kind of democracy do you expect to have, where any qualified candidate is required to sell their soul for the funding required from one of your two parties, who stand for nothing more than merely getting their own reelected? They've both been running to center trying to grind out the votes necessary to win without any concern for what principles or political values they're even suppose to stand for anymore. Isn't politics suppose to be the art of comprise rather than forcing down your tyranny of the majority as an entitlement program? Shouldn't be have politicians more focused on what is best for all of us, rather than those they are beholden to? Do you really enjoy run on sound bites and highlight reels rather than any meaningful political discourse?
I understand you're bitter. I'm pretty bitter too. But why derisively spit at anyone who wants to try and stand up and thinks they might be able to do a better job than the other guy. Or maybe just because they believe the other guy is wrong. Do you really find that the politicians getting elected actually represent you and your world view?
Re: (Score:3, Interesting)
As it appear at the moment the two main parties, the media, interest groups and others, all try to influence who is or can be elected. Idea is to let people decide freely who is the best candidate and certain systems has been implemented to facilitate this. These systems however has in turn been shaped by ideology (in one shape or another) and
Re: (Score:3, Informative)
They've both been running to center trying to grind out the votes necessary to win without any concern for what principles or political values they're even suppose to stand for anymore. Isn't politics suppose to be the art of comprise[...]?
[emphasis mine] Assuming you meant "the art of compromise", that can be construed as "running to center". If "center" is the endpoint of a compromise between two sides, then you are vilifying them for doing the very thing you complain that they aren't doing, in the very next sentence.
Re:Prediction (Score:5, Insightful)
That said, it's still Nader's fault, because despite the faults of the US voting system, Nader knew those faults, and knew exactly what he was doing. He thought that getting more funding for his party was worth 4 years of George Bush and as I recall he didn't even get enough votes to get the extra funding anyway so he shafted us, and everything he stood for for 8 years to prove a point.
That is utter bullshit. I didn't vote for Nader, but even I understand that the only reason Nader got votes is because he offered something the other parties didn't. Blaming Nader for being the best choice in some people's eyes is like saying that the only people who should be allowed to vote are those will vote for the status quo.
Re:Prediction (Score:5, Insightful)
With elections seeming to get even closer, third parties have increasingly more importance.
Re:Prediction (Score:5, Insightful)
No, Washington thought there shouldn't be any political parties at all.
Which he probably got from Rousseau, who reckoned that political parties made democracy impossible.
Re:Prediction (Score:5, Insightful)
The Whigs and Tory parties have been around for about as long as the Parliamentary system. Even before that there were factional grouping that were analogous to parties.
I think the default state of a parliamentary system or any reasonably free group of humans is for factions to form around individuals. Later on those factions become bound by ideology and become parties. Actually even inside a political party there are always competing factions based around individuals. The winning individual gets to define the ideology to some extent so long as they are party leader. Actually that defining process is really a test whether they still are leader - most British Prime Ministers go because the rest of their party opposes on some ideological issue and unseats them. Arguably even the ones that lose elections have already lost the suppport of their own party.
So I'm not sure what you mean by "the British originally had no political parties". Even during the days of absolute monarchy there were competing factions at court. In fact there were regular uprisings where one faction would try to take over. Post Glorious Revolution the power of the monarchy was limited and the factions moved to Parliament. Formal parties formed soon after. Actual the Conservative party was very informal until quite recently - it was much more like a club or faction, 17th Century style. E.g. leaders 'emerged' rather than being elected until 1965 [wikipedia.org].
A free society is really a set of rules that everyone agrees to on how to decide which faction is in charge peacefully. Those factions would still exist in an unfree society, it's just that they would have to compete for power in a non peaceful way. Given the pressure of open competition factions will turn into parties with more formalised rules eventually. Though the Conservatives managed to do OK as an informal 'faction' for a hundred and thirty years.
Actually the LDP is Japan is an interesting example. It has been in power for most of the time since Japan was a democracy. Still it is highly factional and the policies of one LDP faction can be completely different from another. Back before it lost elections it was widely touted as an alternative model to a multi party system - essentially a single party which contained mutiple competing factions. Even now it's longevity is probably due to the fact that it is not really one party in the normal sense.
Zhao Ziyang, the Chinese Premier said to Gorbachev that "in the short term we will democratize the [Chinese Communist]Party but in the long run a multi party system is inevitable". Of course he was deposed and imprisoned by more traditional types and Leninist party discipline was reimposed ruthlessly. Still it's easy to imagine that his model would work a bit like the LDP in Japan for a while until some factions turned themselves into alternative parties.
Actually the KMT in Taiwan used to be the only party but looks like it has managed to transition to being a Conservative style natural party of government in a democracy. Quite possibly if the CCP had followed Zhao's advice it would have been able to pull off the same trick.
Re:Prediction (Score:5, Informative)
Washington was against political parties, and said so in his Farwell Address [yale.edu]:
In contemplating the causes which may disturb our Union, it occurs as matter of serious concern that any ground should have been furnished for characterizing parties by geographical discriminations, Northern and Southern, Atlantic and Western; whence designing men may endeavor to excite a belief that there is a real difference of local interests and views. One of the expedients of party to acquire influence within particular districts is to misrepresent the opinions and aims of other districts. You cannot shield yourselves too much against the jealousies and heartburnings which spring from these misrepresentations; they tend to render alien to each other those who ought to be bound together by fraternal affection.
. . .
However combinations or associations of the above description may now and then answer popular ends, they are likely, in the course of time and things, to become potent engines, by which cunning, ambitious, and unprincipled men will be enabled to subvert the power of the people and to usurp for themselves the reins of government, destroying afterwards the very engines which have lifted them to unjust dominion.
But not everyone agreed, even back then. Washington was the first and last President to not belong to a major political party (except, kinda, John Tyler, who was thrown out of the Whig party).
Re: (Score:3, Interesting)
In the US, factions coalesce into parties before the election. We elect a government. In parliamentary systems, each faction goes on its own and negotiates a majority after the election under the common use case they can't do one on their own.
It's not self-evident that coalitions before voting are worse or better than coalitions after voting.
Re:Prediction (Score:5, Insightful)
Well, very simply, you could use range voting [wikipedia.org] which is not limited by Arrow's impossibility theorem as it does not satisfy the hypotheses.
In reality, pretty much any voting system other than the current first past the post [wikipedia.org] would be a massive improvement due to strategic voting [wikipedia.org]. All voting systems have problems with it, but under plurality voting, it essentially forces a two-party system. By allowing voters to rank their preferences, votes would come much closer to revealing the true preferences of the electorate, and therefore the government would be closer to what the people really want (or at the very least, the politicians would be claiming to support what the people really want).
In the current system, the major parties are able to shape the debate and effectively silence any opposing viewpoints as no major party candidate holds them so they will get no votes. Admittedly, the major parties tend to absorb popular third-party positions in order to avoid getting voted out, but that is a very slow process.
The voting system does not have to be perfect, but you must keep in mind that it indirectly influences political debate and the responsiveness of the government to the people.
To be fair, the choice of a voting system (and the entire structure of the political process) is a choice of what actually matters in government. A two-party system theoretically forces moderate views and compromise instead of ending up with multiple warring parties sharing power. Also the argument can be made that plurality voting is easier to understand, especially when compared to range voting. That is part of why, despite its flaws, I suspect instant-runoff voting [wikipedia.org] is the most reasonable choice for a voting system.
Re: (Score:3, Insightful)
A two-party system theoretically forces moderate views and compromise instead of ending up with multiple warring parties sharing power.
Well, either that or you get two parties that are equally extreme but on opposite ends of the spectrum. Moderates then have to go with the party they find least distasteful at the moment.
The main advantage, in my humble opinion, of a two party system is government stability. The parties in a multi-party parliamentary system may better represent the views of their constituents. However, the large numbers of parties ensures that governments, when they are formed, consist of large, weak coalitions that are
Re:Prediction (Score:5, Insightful)
And that is bad... how?
Re: (Score:3, Insightful)
Hear hear!
A government too weak to pass any laws but those that are blindingly, obviously necessary is my kind of government.
Anyone know where I can get one of those?
Re: (Score:3, Interesting)
Thanks for the link. They already have a proportional representation system which is significantly better than the US system for avoiding a two party system. It is a bit disappointing that the voters would consider STV [wikipedia.org] too complicated, but it does sound like it significantly changes the political landscape, especially in that it sounds like it changes the focus of voting from parties to individuals which may make the elected individuals less predictable as they would not necessarily be kept in line by their
now that's just dumb (Score:2, Offtopic)
Ironically, the
Re: (Score:2, Funny)
Re:Prediction (Score:5, Insightful)
Me too. The Corvair was a cool little car, especially if you dropped a 350 in it. Unsafe at any speed my ass.
If it is equally unsafe regardless of speed, it makes perfect sense to drive as fast as possible so you can get to your destination sooner.
Seems like you're using sound logic to me.
Re: (Score:3, Funny)
You also reduce your unsafe minutes spent in the vehicle.
Good. (Score:5, Insightful)
I'd like them to take it a step further and have it so the owner can see the error codes and refer to the manual. I got a check engine light on a 2 month old car while driving across country with no dealer for 800 miles. I chose to risk it rather than have to pay a local mechanic to look at it. As it turned out it was only a dirty fuel filter caused by crappy gas. Forcing me to worry and go to a dealer 700 miles before my destination is really a crappy way to squeeze money out of someone who just gave you 30 grand.
Re: (Score:2)
Re:Good. (Score:5, Informative)
The real problem right now is reprogramming data. OBD-II cars (everything 1996+ and some earlier) have standard protocol, connector, pinouts (kind of), et cetera. They also have standardized codes. But there are also manufacturer-specific codes which are only required to be provided for a reasonable fee which means (in practice) they can be presented as a book of text and they can charge you a hundred bucks. And most importantly there are manufacturer-specific codes which get sent to the PCM ("powertrain control module", what we used to call the ECU or "engine control unit"... but PCM is standardized terminology per OBD-II spec) which are used for tuning, for example for altitude.
Re: (Score:3, Interesting)
Not really. All of those things have their own specific terminology. BCM, PCM, ABS module... And immobiliser? The immobilization of vehicles is done in the PCM, although sometimes there is an external unit which handles some aspects of security. It's a circuit, not a module, except when it's an add-on. And when it is, you certainly shouldn't call it the ECU, because someone might confuse it with the PCM... since it most certainly WAS normally called the "ECU" in pre-OBD-II ("OBD-I", though that is a signifi
Re: (Score:3, Insightful)
Please read and at least attempt to understand comment before replying...
Could you repeat that comment one more time so I can be sure I have it right?
Re:Good. (Score:4, Informative)
Also, generally if your engine light comes on, your car will go into limp home mode, which is a cut back operation that uses default configs and ignores either all or some of the sensors just to enable you to get home, or to a workshop somewhere without the working sensors.
Re: (Score:3, Interesting)
Re:Good. (Score:5, Informative)
Time to spend more of my state-sponsored education. The mandatory light on all 1996+ cars is known as the MIL or Malfunction Indicator Light. The MIL lights when your vehicle's emissions are out of spec for any reason. I shit you not, that light is there specifically to tell you that your car is putting out excessive emissions. This happens whenever any of the "monitors" fails. A monitor is a list of conditions. Most monitors are "trip" monitors; a trip is a certain set of driving conditions. For example, if you run the vehicle at 50% or more load for a certain period of time and then coast for a certain period of time the car will operate the EGR (exhaust gas recirculation) valve, and it then has a chance to test to see if it is working. There's also a comprehensive monitor which runs every so often (pretty often actually) and checks to see if any sensors are giving a value which seems exceptionally wacky, either on its own or compared to the state of other sensors.
The MIL will clear itself so long as the fault was not serious (IIRC there are four conditions) if the monitor which failed passes three times in succession. All this is from memory so, bear with me if I get something slightly wrong. When it happens a snapshot is also stored. This is some of that "black box" data that can tattle on you in an accident; the car knows the position of the accelerator pedal and how fast it thinks you were going (and usually also knows what gear you're in and how many RPMs you're making, anyway, from separate sensors/senders) as well as the state of every other sensor under the hood, and possibly some others. There may also be a CEL (check engine light) and if the manufacturer is feeling particularly benevolent, a "check gauges" (or even "check gages"... heh heh) light which lights if, say, your oil pressure is low or your coolant temperature is high, but not so high that the computer thinks that what the sender is saying can't possibly be right.
Anyway, when any major sensor/sender flails the car will go into limp-home mode. It will also happen if there are repeated misfires, but misfires cause at least one of the monitors to fail (I forget which one though, sorry) and should light the MIL. The limp-home mode will not only retard the timing and thus reduce performance and worsen emissions, but in some cases it will also restrict maximum speed. When limping home the vehicle usually runs rich, which can kill your catalytic converter but which helps reduce misfires due to many types of engine problem.
Re:Good. (Score:5, Insightful)
Everything I have described above costs less than one air-bag, and should be standard equipment on all but the most basic models, and provided as an "at cost" option for any car it doesn't come standard on.
Should... in a fantasy world where the corporations are actually serving their customers.
Re:Good. (Score:5, Insightful)
They have the perfect excuse: Money.
They have the perfect backup bs excuse: Cars is hard!
They are protecting the poor, stupid, car owner. Who undoubtedly is incapable of understanding the workings of the modern car and therefore should always be directed to an authorized dealer to diagnose and repair any issues that pop up. Therefore, providing too much information must be avoided. The owner must prove they understand the workings of the car in order to access the information concerning the workings of their car.
You see, it's all for you really.
Re: (Score:3, Informative)
It can't, because there could be many causes, most of which mea absolutely nothing to a non-mechanic.
High cyl head temperature = bad thermostat or blocked radiator or failed water pump or broken belt or low coolant level(why? because the radiator has a pinhole) or collapsed return hose or 18 other things. For something so 'simple' as the cooling system.
Troubleshooting/diagnosis is quite often not so s
Re: (Score:3, Insightful)
Re: (Score:3, Insightful)
if there was a way for the data to be displayed on what stands to be an included (chances are #price rank of car#* 10%) display then even if its gibberish to a non mechanic then all i would take is a mechanic to see the display (maybe via cell phone pic) to advise the person from the "oh not serious come in when you are ready" to "STOP THE CAR RIGHT NOW IM SENDING YOU A TOW TRUCK" range.
Re: (Score:3, Interesting)
As a shade tree mechanic (professional mechanic years ago) who does not have money shooting out of any of my body orifices, I would prefer a simple well documented way to get at the codes.
That's doubly true if I'm not at home at the time (a remarkably common condition when I'm driving a car!) and want to know if I'll be better off completing my errands then fix it, returning home immediately and hope I get there, or try to limp somewhere and park it.
For your example, High cyl head temperature tells me to ta
Re:Good. (Score:4, Informative)
"Engine is hot, continued driving may cause engine failure and damage requiring expensive repair or replacement of the engine. Stop the vehicle in a safe location and keep the engine running."
When in park,
"Cylinder head temperature is dropping, do not turn off your engine, unless there is a safety issue. The cylinder head temperature gauge is measuring 477 degrees. Normal operating range for cylinder head temperature in this vehicle is 180 to 350 degrees. Operation with cylinder head temperatures above 450 degrees for more than a few minutes can lead to head gasket failure, lubrication failure, and will eventually lead to complete engine failure. Possible causes for elevated cylinder head temperature include cooling system failure, lean fuel mixture, and operation at high engine load for extended time in a hot environment. As long as the cylinder head temperature continues to drop quickly, the engine should be kept running to allow the cooling system to operate. This vehicle has experienced high cylinder head temperatures 3 times in the past year, indicating a possible intermittent problem with the engine, or operation in extreme conditions. Consultation with a qualified mechanic is recommended."
Later,
Cylinder head temperature is 342 degrees, this is within normal operating range (180-350). All other engine status monitors are within normal range. If cylinder head temperatures continue to run above normal your vehicle should be serviced by a qualified mechanic as soon as possible.
Most of this information is already codified in a reasonable form for the service techs, it wouldn't take as much effort or expense to put it into owner consumable form as it does to formulate a seasonal marketing strategy for a splinter brand (Pontiac, for example.)
One diagnostic that I could have used would have read something like:
The engine coolant temperature gauge is measuring 877 degrees. This indicates a lack of coolant in the system, or possibly a faulty temperature sensor. All other engine status monitors are within normal range. Recommend service with a qualified technician as soon as possible, the engine monitoring system cannot function properly without accurate engine coolant temperature information.
Instead, I just got a pegged temperature gauge and a check engine light. This, coincidentally, happened just after I hooked up a rather heavy trailer to a new-ish pickup truck. Freaked me out, but it was just a bad sensor, we were lucky to find a mechanic in a strange town who would fix it on a Saturday afternoon. If the light had come on 3 hours later, it would have been a nerve wracking Sunday driving 400 miles with the temp needle spiked, check engine light on, and nothing really wrong.
I can access codes on my car without any tool. (Score:5, Interesting)
Interesting, numerous Cadillac models built after the start of OBD1 have the ability for the owner to both access and clear diagnostic codes by him/herself. My 1993 Cadillac Seville is one such car... I hold down two buttons on the dash, and I can access all of this information via the dash display.
In-dash text displays were rare in 1993, but now all most all cars have them... so this functionality really ought to be in all new vehicles.
It's YOUR car, isn't it? Then again, BMW has build a few models that have no dipstick and no oil cap (visible, anyway)... :(
Re: (Score:3, Informative)
Lots of cars were like this. I had a Mazda with with a few terminals. There was a screw to ground a pin to reset the codes. Another terminal you could put an multimeter prong in when you grounded another pin with the same screw. Then you watched the needle for the codes.
I had a Volvo that had a little box with a LED and a couple of buttons, very simple. These were early OBD-II cars.
Re:Good. (Score:5, Insightful)
you already can. Go get an OBD2 reader or have a shop pull the codes. Interpreting them is a bit harder - I thought there was legislation requiring manufacturers to divulge the codes, but I'm not sure.
Point of the article is that the standard OBD2 readers aren't cutting it anymore, they're giving the legally required (smog related) codes and nothing else. If you want a reader like the dealer uses, prepare to fork out more than you paid for the car... This is why the independent mechanics are feeling screwed.
Re:Good. (Score:4, Interesting)
You can get readers for them which will clear the code after you fixed the problem. I've seen some that give a warning level on how bad the code is. Just because you have the code and maybe even the explanation, doesn't mean you'll know what to do though.
P0411 - secondary air injection incorrect flow
It means either a hose has a hole, or a solenoid, vavle, or pump isn't working. This is basically an emissions system which I'd rip out in a heartbeat if I didn't have to pass an emissions test.
You almost had me believing you knew stuff.... (Score:3, Informative)
...until you tossed out 1970's era emissions gear assumptions. Most modern emissions control gear actually works by improving the efficiency of the engine. Not all of it (have to put that here because it's /. and someone will point out catalytic converters and a few other things) but mostly, all that computer control fuel metering and mixture controls, increased engine running temperatures and variable timing (and so on) serve to make the engine run more efficiently, which is why there are fewer artifacts
The roll of the dice (Score:2)
I got a check engine light on a 2 month old car while driving across country with no dealer for 800 miles. I chose to risk it rather than have to pay a local mechanic to look at it.
You gambled. You won. This time.
Now tell me why you chose a car which has one dealer every 1000 miles. 30 grand does not buy you a Rolls-Royce.
Re: (Score:2, Informative)
Re:Good. (Score:4, Interesting)
Cars are already more or less pretty open with some proprietary stuff tacked on. ODB-II (or now CAN) has a set list of standard messages that everyone uses. Now car companies can choose to extend into their own messages if they want. Engine speed, throttle, etc all have a set upon CAN Id.
AutoZone and AdvanceAuto and every other car repair place will read these codes for free. They may be cryptic (Your fault could have probably been FUEL PRESS LOW or something), but Google and auto forums can decode them for you pretty easily.
There are also 3rd party options (at least for VW). Ross-Tech makes VAG-COM [ross-tech.com] which will let you connect to almost any ECM in your car and read diagnostics or monitor blocks which is much cheaper than VW's "OE" tool (Many $k).
Now letting them see the latest service manuals would help, many companies use MATLAB/Simulink to autocode their ECM software. The lines of code and the possibility for bugs is scary. And like software companies, no one is going to be doing software updates on 3-4 year old cars meaning instead of "Don't buy X car because the wheel bearing goes bad" you could get a bug report of "Don't buy X car because the throttle position sensor flips out".
Re:Good. (Score:5, Informative)
CAN is a wiring spec and a protocol and falls under OBD-II; You can read all about the SNAFU on Wikipedia [wikipedia.org] but the short form is that there are five protocols including CAN, which is mandatory on 2008 and later vehicles. Wikipedia doesn't make it clear that CAN has been allowed for in OBD-II for years, if not all along, but that is indeed the case. AFAIK CAN is the most expensive of the protocols to implement, so some OBD-II interfaces don't include CAN support. CAN is also commonly used for communications between the PCM and the computer which operates the transmission, so your PCM might actually have multiple CAN interfaces, though only one of them pins out to the OBD-II connector.
Re:Good. (Score:5, Insightful)
A better option is to just reform software patent laws. If we make software patents work like machinery patents this whole thing would be solved.
Specifically-
Source code == Blueprint
Compiled code == working model
You can get a patent with one or the other, or both, but then you have to file it with the patent office.
Any changes to the patented design of a significant functional nature invalidate the patent, just like with hardware.
If I make a device that is designed to alter your product, it is NOT a patent or copyright violation, until you enter the world of software. This is horsecrap. Being able to not only patent a specific program, but an entire algorithm and everything it applies to is a drastic abuse of the very idea of patents.
sigh..
This is a very old issue (Score:5, Interesting)
And I thought it was resolved long ago. But now that I am part owner of "big auto" since my government now owns controlling shares in it, I have to say that there is NO "trade secret" that should be allowed to supercede the right to repair or modifiy your personally owned equipment. This is especially true when the purpose of said "trade secret" is the protection measure itself.
Re:This is a very old issue (Score:5, Insightful)
The argument for DRM in the car MIGHT fly in cars that are leased (which in my lay-person's brain sounds somewhat similar to a license for using software), but there can be absolutely no reason for preventing me from accessing information on something that I own outright.
Its not like I bought a license to drive the car (that was provided freely (sans a few yearly fees) by the government of my state), I own the metal. What possible argument can there be for preventing me from reading the information in my car's engine?
Re:This is a very old issue (Score:4, Insightful)
The same argument that says you can only used licensed DVD players to play the DVDs that you own.
Re:This is a very old issue (Score:5, Funny)
Holy crap, a reversed car analogy!
Re: (Score:3, Informative)
Re: (Score:3)
Yes, "personally owned equipment" is probably key here. The auto companies are not "licensing" the car to me, or the software on it. I own my car outright. I should be able to do anything I want with it. Of course, the manufacturer has the right to revoke any outstanding warranty as well as well as be absolved of any liability if I make changes.
Read-only data should have no restrictions here. But modifying data though can have reasonable exceptions. Ie, if the diagnostics dongle allowed me to reset th
They can have their DRM... (Score:2)
Re: (Score:3, Interesting)
Not sure what you mean by essential car systems stuff vs. user facing stuff (the computers running the engine, traction control, brakes, navigation radars, autodrive, etc. all report to the user via the dashboard) however DRM is meant to protect copyrighted material. Last I heard, lists of data (such as the error logs that a car's computer might produce) are not copyrightable mate
DRM when your life is at stake? (Score:5, Insightful)
Its one thing to introduce DRM to protect the copyright on a song, book or video. That isn't fair but it's also unlikely to get anyone killed. (Laws that introduce overly harsh penalties like jail time, ruin a career, or bankrupt someone are a whole other kettle of fish). How can any company justify pricing people out of having their car repaired? Lives are at stake. I wonder how long it'll take before people start suing because repair work was so unreasonably expensive via authorized channels that it leads to injury and death? It should be illegal to lock up certain kinds of information. It should be illegal to use laws like these to prevent competition where lives are at stake.
Re:DRM when your life is at stake? (Score:5, Insightful)
Lives are at stake
see: big pharma.
clue: no one cares about 'lives'. the world is only about money and power and control.
(sorry for the wake-up call).
Re: (Score:3, Insightful)
Your post is kind of vague but it sounds like your criticizing the evil pharmas for not giving away patents on drugs they spent billions researching when no one else did the same with the success they had, and that this therefore proves that the law doesn't care about saving lives.
I think it's an unfair criticism.
If you were to void all patents today, yes, you would make some medications more affordable and save more lives. You would also make these pharmas think really, really hard about investing another
Re:DRM when your life is at stake? (Score:4, Insightful)
Just finished listening to the latest econtalk podcast and they covered this very thing. The majority of the sunk cost in bringing a drug to market is in the clinical trials. You could get rid of patents on drugs by simply requiring any competing manufacturer who wanted to make the same drug to buy out the original drug company's clinical trials investment. Let's say the first company spent $800M on those trials. Somebody else wants to make the drug? No problem, pony up $400M and you now have two manufacturers. Subsequent companies also pay $400M but it gets split up among the prior license holders.
It's an ingenious way to spread the costs so drug innovation continues without patents.
Re:DRM when your life is at stake? (Score:5, Insightful)
Why then would you want to risk $800M in the first place when you can let your competitor spend the $800M, pay them a paltry $400M for the one thing that succeeded and then split the much larger profit to be made? Extra points if your marketing department is much better and you take a much larger fraction of the resulting market.
Not technically necessary, but... (Score:4, Interesting)
The article cites the DMCA as a legal problem, but this doesn't apply in this case. In fact, two of the cases it cites, garage door openers and printer ink cartridges, have already gone to court, and in both cases the judge determined that "lock-out" codes are not protected by the DMCA because they're meant to prevent interoperability, not copyright infringement.
Technically, this Right To Repair act is unnecessary. As long as you're bypassing the restrictions for the sake of interoperability, you're legally in the clear.
But that's only in a perfect world. Unfortunately, in this litigious society you're likely to get sued anyway. It's too bad doing something perfectly legal can still end up costing you thousands in legal fees. Hopefully with an actual law to back up the rulings, there will be a lot fewer lawsuits
Re:Not technically necessary, but... (Score:4, Interesting)
The law is necessary because without it written clearly (and sometimes even when it IS written clearly) it will not stop the auto makers from trying to sue you with their army of lawyers. And you could be right... but they will still lawyer you to death. We've all seen it.
Re:Not technically necessary, but... (Score:4, Insightful)
...auto makers from trying to sue you with their army of lawyers.
The most accurate statement of the reason American automotive companies are failing -- focusing on developing fine points of law instead of the fine points of automotive engineering.
Happening in Canada too (Score:3, Informative)
Right-to-Repair is also being fought over in Canadian federal parliament. Bill C273 just passed its second reading
http://www.righttorepair.ca/ [righttorepair.ca]
some comments on OBD-II (Score:5, Insightful)
OBD-II (the UART mentioned in the article) does not really tell you what is wrong with your car. It gives you another clue. Experience, know-how, tools, other clues, and a process of elimination tells you what is wrong with your car. OBD-II tells you that something was detected like a knock, misfire, oxygen rich, emissions leak, etc. Now a mechanic has to hunt down the cause and fix that. I just wanted to make that clear. It is like looking at iostat not dtrace.
It will be nice to get the codes, but most of them are pretty much known by now. Some ranges are pretty defacto standard too. It's annoying though that the codes can be different on the same model car sold in CA vs IL though. That can trip you up when you have a code list that does not include the correct region.
Re: (Score:3, Interesting)
Re:some comments on OBD-II (Score:5, Informative)
If the mix is rich, and the computer KNOWS that the mix is rich, that narrows it down quite a bit. Then the only possibilities are the airflow sensor, or possibly the fuel pressure regulator. (Of course, if it's a car without an airflow sensor, it could potentially be the throttle position sensor or maybe the manifold air pressure sensor. But most cars rely on a MAF sensor nowdays.)
If the mix is rich, and the computer claims "fuel mixture lean" or believes nothing at all is wrong, the problem is most likely the O2 sensor, and the computer is being fooled into enriching the mix.
I think the codes are quite useful. They let you know what the car is thinking.
I'm... I'm confused... (Score:4, Funny)
Do... do I still try to make a car analogy?
Maybe a simple "In Soviet Russia car analogy make you?"
Open standards before cars can fly... (Score:5, Funny)
Outright Dangerous (Score:5, Interesting)
In my case it was an error code that Mini do everything they can to keep meaningless... as opposed to DRM. It was also potentially life threatening.
Coming back out of the mountains, the electric system shut off in the car, the engine cut out. There was no shoulder so the first place out of traffic we could get to was the gap between the main freeway traffic and an oncoming merge lane.
It was a fairly dangerous spot - no walls, no guard rail to get behind, between two streams of traffic moving at speed - but the best option we had.
The car restarted, flashing up CC-ID 354 - whatever that meant. Most likely, we'd be safe pulling away and finding a less risky spot. But, if it was about to fail again, as we accelerated, we'd be dumped, stalled, in the middle of moving traffic with no shoulder.
Obvious answer: Call Mini service. First Mini dealership couldn't get their service department to answer. They sent me to Mini Roadside Assistance. That muppet had a call sheet he had to work through and couldn't do anything as he couldn't find out VIN in the system. By this point, as we got buffeted by every passing big rig, my wife told him she didn't give a damn about whether we were in the system or not, we simply needed to know if 354 meant it was safe or unsafe to move... Turns out he has none of the details. All he can do is call a tow truck. We hung up and called another dealership's service. They at least answered but refused to say what it meant, only that we shouldn't drive it. No details about whether it would likely get us half a mile to the next off ramp, nothing.
An online search (thank you iPhones) turned up nothing (curse you googles). Turns out the codes are kept pretty much to Mini alone.
What angers me about the whole experience is that "Error 354 means a fuse has blown and the car will stall over 10mph" would've told me there really was no safe way off. "Error 354 means the keyless ignition charger has a faulty connection, drive with the key out of the charger and take it in for service." would have told me it was safe to get out of that exposed position. "It's a secret" did nothing save endanger us.
More complex than that (Score:3, Informative)
The ODB2 standard defined certain codes that had to be standard and certain codes that must be revealed and any $49 code reader can read them and potentially shut them off.
But manufacturers also implement extensions to those codes that are for diagnostic purposes or option enabling purposes that they do not allow access to except through proprietary computers which they sell at extremely high cost (high 4 figures) mostly to dealers or to mechanics who specialize in one make of car.
The problem is a "we work on all cars repair shop" can't have the diagnostic computers for all the makes let alone all the manuals that tell them how to troubleshoot the problem (multi-page flow charts), the parts on hand to make the repair a prompt one, the specialized repair tools necessary to do the job or the expertise to do the job right.
I have all the repair codes for one of my cars and all the repair manuals and a code reader. Doesn't mean I can or should do most of the work, (but it does help me keep the repair shop honest).
Doesn't mean a do everything shop is gonna be the right place to take my car for all the possibilities of failure either. I want a shop working on my car that is doing the same car day in and day out and thus has the computer, manuals, parts and expertise to do the job right and promptly.
All makes shops can do some jobs, but there are lots they shouldn't attempt any more than I should.
Nadar's request won't change this because the do every make shop will still not have the parts or manuals or expertise to do many jobs.
It is up to us as consumers to know what each shop can do and pick the right one.
Independent shops aren't locked out (Score:3, Informative)
Independent repair shops in the US can purchase the same tools and repair information that franchised car dealers can.
Details about individual manufacturer's offerings to the aftermarket as far as tools, service information, and training can be found at http://nastf.org/
Proprietary, not DRM (Score:3, Informative)
Back around 2000 I did some work on diagnostic tools. Engine- and emissions-related trouble codes are industry standard as defined by the Society of Automotive Engineers (SAE). There are plenty of tools that will read these trouble codes. Where it gets interesting is that in various cars, the communication hardware could be UART-based, PWM, in the last few years, mostly CAN, but there were others.
A decade ago, I think it was under a consent decree, the 3 Detroit auto companies had to make diagnostic information available after one year. This being the auto industry, through incestuous business relationships one company got to collect the information, and of course they were the only source for the second year, and after that your friendly neighborhood repair shop could get the information from several sources.
The thing about vehicle buses is that they carry a lot more information besides diagnostics, and this "everything else" is held pretty closely by the auto companies. Dealers get access to at least some of it because repairs are where the cash flow is. Also, making warranty repairs quicker helps the auto companies keep their costs down.
Slashdot readers should realize that the world of embedded software inside the car has very little in common with desktop computing; automotive electronics resemble distributed systems more and more every year; and the shadetree mechanic is SOL these days.
Legislation already in place (Score:5, Interesting)
Now, while the EU obviously has no bearing on the US, auto manufacture is a global industry, standard parts abound, and most US manufacturers have one or more European brands in their stables. You'd have to have some kind of Canute complex to think that if you were to try and charge the US drivers for this information, they wouldn't just turn to the net and ask their European associates for it.
Too much info/BS. 100% pure BS. (Score:3, Insightful)
Re:I believe in free market capitalism (Score:5, Insightful)
Way to miss the point, pornologist. In a free market, ANY mechanic would work on ANY car he/she felt like figuring out. We have a government-enforced monopoly on any car with a computer in it, thanks to the DMCA and similar laws. That's not freedom; that's not capitalism, that's corporatism.
Re: (Score:3, Insightful)
That's not freedom; that's not capitalism, that's corporatism.
Also known as "Trickle-Down Economics" aka "Trickle-Upon Economics" aka "Reagan Free Market Capitalism", as in big corporations a "free" to fuck you six ways till Sunday.
He made it perfectly clear what he was referring to. I don't know why you were confused!
Re: (Score:3, Informative)
Big corporations generally screw you six ways from Sunday by buying up the law in one way or another. The more you regulate the economy, the more likely that guys who have connections will have the ability to ruin you.
Re:I believe in free market capitalism (Score:5, Insightful)
And that's why you pay top dollar at the dealership, and when they screw you without lube you just shut up and take it.
Most of us are trying to avoid that. Some of us even (gasp!) do the work ourselves, learning as we go along. YIKES!
Re:I believe in free market capitalism (Score:5, Interesting)
I don't want the mechanic who thinks he can figure it out.
Weeding guys out that don't know what they are doing is what the free market is for. It's the USA. No one is forcing you to go to an incompetent (see the word "compete" in there?) mechanic. If you want to go to the dealer, go to the dealer. Me? I'm going to keep driving my 10 year old Ford and take it to my broham, Juan, when it doesn't run well. He knows where to find and how to replace the several on board computers. And I support the local economy more directly by using an independent mechanic. Competition baby!
Re:I believe in free market capitalism (Score:5, Insightful)
Nobody's arguing against your right to contract with a dealer and get whatever repairs done you'd like. Other people would like the liberty to choose a different path. Why do you want to deny them that?
Re: (Score:3, Insightful)
I want the mechanic who knows what to do.
And currently, you get the mechanic hired by the franchise. If, say, the franchise owner is looking for spare cash and hires a guy whose total experience is earning a C+ in high school shop, then that's your tough luck.
Re:I believe in free market capitalism (Score:4, Informative)
OBD-II [wikipedia.org] is the spec. However, manufacturers tend to add all sorts of extentions and lock-out codes. With the right legal fanagiling, you could argue that these are copy protection schemes under the DMCA, or maybe just trade secrets. Either case is a government-enforced monopoly.
Re: (Score:3, Insightful)
There was never a law saying to have to tell anyone how your stuff works.
No, but there is a law saying it's illegal for you to figure out how someone else's stuff works and another that stops you from creating something that works the same way.
Them having to tell you is irrelevant most of the time, because humans can (could) figure most things out... Until they started calling it "Reverse Engineering"...
GrpA
Re:Meh. (Score:5, Insightful)
"Well, most car manufacturers ARE offering pretty reasonable warranties anymore. 10year/100,000Miles is not unheard of, and actually pretty common. When they're backing the car for that much time / wear should they not have an exclusive right to the work done on the vehicle?"
They are offering those to be competitive, it isn't generosity, and the warranties are not for every part of the car under every circumstance. For example, what about someone repairing crash damage? Should they be forced to go to a dealer?
A ten-year-old car is often not worth paying dealer labor rates to fix, so this is really "planned obsolescence by vendor lock". As a mechanic I gan get around this affordably by playing "swaptronics", but the general public are not so fortunate.
Re: (Score:3, Informative)
Actually there are lots of buses in new cars. CAN bus is used for component interconnection. LIN bus is used for sensors. MOST bus is used for car multimedia. FlexRay is the replacement for CAN bus but not yet widely used. That UART mentioned is just a diagnostic output.
Re: (Score:3, Informative)
Odd, I chose Mercedes for exactly the same reason. Mercedes service information is available for all post 1994 models at www.startekinfo.com. The complete Electronic Parts Catalog ( EPC ) is free to residents of the US. Full DVD service manuals are available for models that are out of warrranty. Of course the techs won't tell you this, they would lose business. I do most of my own work on my CL500 and AMG.