Want to read Slashdot from your mobile device? Point it at m.slashdot.org and keep reading!

 



Forgot your password?
typodupeerror
×
Technology

Canon Mistakenly Announces 11-Megapixel Digital Camera 402

RichardtheSmith writes " PC Magazine just confirmed that Canon mistakenly announced a new 11-Megapixel digital camera that wasn't supposed to be announced for another two weeks. This caused quite a stir on the digital photography message boards like DPReview, where Canon apparently tried to have all links to the press release taken down. The PC Magazine article is here. The original press release can be found here."
This discussion has been archived. No new comments can be posted.

Canon Mistakenly Announces 11-Megapixel Digital Camera

Comments Filter:
  • 11mp (Score:3, Insightful)

    by _ph1ux_ ( 216706 ) on Wednesday September 11, 2002 @07:37PM (#4241447)
    I would like to see comparison images taken with a low level megapixel device compared with this one.

    11 megapixels is an impressive number - but means nothing to me until i see what that actually translates to - picure. 1K words. etc....
    • by Trepidity ( 597 ) <delirium-slashdot@@@hackish...org> on Wednesday September 11, 2002 @07:46PM (#4241511)
      Taking even a very high-resolution (for a desktop) monitor, say 1600x1200, is less than 2 Megapixels. So anything higher than that will have to be downsampled to display on a monitor anyway (either that or you'll have to scroll around). The main advantage in going higher than that is for high-quality printing. Printing a standard 3x5" photograph at 300 dpi requires a bit less than a 5 Megapixel camera, though something less will probably do okay too. Of course the more megapixels, the bigger you can print and still have it look good.

      Also, if you want to do image editing, you'll want to start out with a higher-quality image than what you want as a final image, since filtering/etc. will invariably reduce the quality of the image.

      So is 11 megapixel necessary? If you're taking pictures to email to grandma, certainly not. If you want to print out 8x10" photographs on high-quality photographic paper, it could be nice.
      • It also might be interesting if you want to enlarge some detail in the photograph.
      • That's right. It's also useful to have "extra" resolution for cropping purposes. Like if your original photo isn't framed just right and has distracting/ugly junk off to one side, or if you want to work with just a part of a larger photo. (Many of the famous photographic prints we've all seen are cropped from the original negatives for reasons like these.)

        Anyway, the more image resolution you have overall, the more pixels you have to work with in that cropped portion, and the better your final results will be. That can give a photographer a lot more "darkroom" flexibility with their digital image.
      • Ahem...

        I print 5X7 prints with my 2.1 Megapixel Cannon all day long at 1200dpi and get 35mm 1hour processing quality prints. everyone at work is amazed, and the reason I bought it was the quality of the lenses (glass not plastic like the kodak crap) and the near-lossless Jpeg compression (or the almost no-loss compression settings) in the camera.

        I shoot completely digital now. I havent shot a roll of 35mm film in my SLR for over 2 years now and I havent looked back. 3x5 and 5X7 prints are excellent and some of the 8X10's I have printed are very satisfactory when printed at kinko's on their dye-sublimation printer on kodak paper.

        Anyone that tells you you need 3 megapixel or better to replace film for every-day use is either on drugs, or really doesnt know what they are talking about.

        Granted the 5 megapixel SLR from cannon is an awesome camera and this 11 megapixel camera is also very cool, but almost no-one needs that kind of resolution for everyday photos or for vacation photos.

        • Considering that this camera will sell for six thousand dollars ... and this is the important bit ... how likely is it that Canon intends it for "everyday photos or for vacation photos"?
          This camera isn't intended to replace film for "every-day use". It's intended to replace film for professionals.
        • I print 5X7 prints with my 2.1 Megapixel Cannon all day long at 1200dpi and get 35mm 1hour processing quality prints.

          Even if you've got a bottom-of-the-barrel $49 printer [hp-at-home.com], it will do at least 600x600DPI. A 5"x7" print will use 3000x4200 pixels at that resolution, or over 12 megapixels. Dye sublimation will hide the loss of clarity because the process is inherently blurry at the pixel level, there is no set of sharp dots. But if you are looking for great contrasty detail, like nature photography where you want to see veining on a dragonfly wing, you are going to want those pixels. A 2.1 megapixel camera will give you far less than 300x300 DPI on a 5"x7".

          Even a (relatively) cheap 35mm SLR like the Canon Eos Rebel [bizrate.com] at under $250 will easily take negatives with ordinary film that will print a 8"x10" that you will need a magnifying glass to see all the detail.

      • Things change... (Score:2, Insightful)

        by mahlen ( 6997 )
        "Taking even a very high-resolution (for a desktop) monitor, say 1600x1200, is less than 2 Megapixels."

        And don't assume that this will always be the case in the future. I predict that someday 1600x1200 screens will seem as quaint as 640x480 screens are now.

        mahlen

        History repeats itself. That's one of the things wrong with history.
        --Clarence Darrow

      • High pixel digital cameras allow for better security cameras. being able to resolve the liscense plate numbers off a car outside a store. ie. Things further away are resolvable to a useful level. There are a lot of implications to this, i think.
      • Taking even a very high-resolution (for a desktop) monitor, say 1600x1200, is less than 2 Megapixels. So anything higher than that will have to be downsampled to display on a monitor anyway (either that or you'll have to scroll around). The main advantage in going higher than that is for high-quality printing. Printing a standard 3x5" photograph at 300 dpi requires a bit less than a 5 Megapixel camera, though something less will probably do okay too.

        Keep in mind that pixels on a digital camera are for one primary color only; i.e. 1 megapixel = number of red + green + blue elements = 1,000,000. Often times the ratio of green to red to blue is 2:1:1 which means that for certain images, the number of effective pixels might be 1/4 of what you'd expect. Assuming this, a digital camera would have to be a 7.68 megapixel device to fully tax your 1600x1200 monitor for all possible images.

        A better comparison between monitors and digital cameras would count phosphers in the monitor against the elements in the camera's CCD.

      • Yeah ... but what if they were to bundle it with one of these [slashdot.org]?
    • I have a 1.5 megapixel camera at I don't think anyone other than a professional would need anything more than 650KB jpegs. I don't even use the largest size most of the time as It is hard to tell the difference.
  • Well, geez (Score:5, Funny)

    by thelinuxking ( 574760 ) on Wednesday September 11, 2002 @07:37PM (#4241449)
    This caused quite a stir on the digital photography message boards like DPReview, where Canon apparently tried to have all links to the press release taken down.

    Cannon sure will get pissed at Slashdot now, wont they!
  • When will a consumer version be anywhere near that, and why do we really need to have 11mpixels for most shots, after 2mpix it was really hard to tell the difference anyway.
    • Try scaling a photo up a bit, printing it to a decent printer, or doing any editing with photoshop/gimp and you'll really appreciate those 11MP.

      I find that any resolution under 300dpi looks cheap, which is rarely the effect I'm trying to produce. Given that, a 2MP camera gives around 4"x4" which is or smaller than an ordinary photo.

      This camera is a significant improvement, 11MP gives more like 10"^2, big enough for almost all uses.

      FWIW, I'm still holding off buying a digital camera because my $300SLR is better than a $1000 digital camera. I can understand someone with a $2000SLR medium format camera saying much the same thing about this camera.
    • Print out a 2 meg image at 8x10 in 1200 DPI then a 33 meg (11MP) then look at an 8x10 blowup made from 100 ASA consumer grade 35mm film.

      2 meg image is VERY blurry compared to 35 mm. I of course havent seen the 11 MP camera output, but I can tell you that there is huge room for improvement over todays average 3MP cameras. And I'm not even talking about pro use. Just amateur photographer use.

      Sure those people that never "needed" anything other than a 110 snappy camera wouldn't need it. But there are thousands of amateur photographers out there that would probably (like me) LOVE to have far more resolution that my current 3MP camera gives me.

      I won't be shelling out whatever gawd awful price they'll want for it at first though :(
    • Remember: "640 Kilobytes of computer memory ought to be enough for anybody."

      I for one want a 6+ MPix consumer camera, just like I want a higher resolution DVD...
    • Noone _said_ we really need to have 11 megapixels for most shots. Even Canon doesn't think that, hence the > $5500 US price for this camera (body only, mind).

      Your post is like seeing an announcement for a server 1TB RAID array, asking when a desktop version will arrive, and why would most people need a 1TB RAID array on the desktop.

      Feh.

      This is seriously high-end equipment, and is intended by it's maker as such, and it's priced accordingly.

      Also note, according to the premature press release, it's a 'full-frame' sensor, which will make it the first of its kind on the market. Couple that with Canon's excellent line of lenses, and this is a fantastic announcement.
  • by netsharc ( 195805 ) on Wednesday September 11, 2002 @07:38PM (#4241457)
    At least by pretending they announced this by mistake, they just generated more buzz about it. :)
  • Article Text (Score:2, Informative)

    by Anonymous Coward
    In case of slashdotting or other badness:

    Canon Europe celebrates Digital Revolution at Photokina 2002

    24/9/2002

    Witness the launch of Canon Imaging Gateway an online digital imaging service for consumers

    Canon takes its large format printers to high street print shops to deliver fast, large-scale image reproduction

    Canon celebrates 15 years of EOS with the launch of the EOS 1Ds - the world's highest resolution professional camera

    Cologne, Germany - Canon Europe will use Photokina 2002 as the launch-pad for its latest innovative digital technologies designed to meet the demands of both the consumer imaging and professional print markets.

    Forecasting a stunning 70% increase in production of digital still cameras, 2002 has already been an historic year for Canon Europe as both professionals and consumers fully embrace digital imaging.

    Mr Hajime Tsuruoka, Canon Europe's Chief Executive Officer and President, said: "Canon Europe is at the forefront of the digital revolution and we plan to remain there. Our strengths as an organisation lie in our implicit understanding of the digital process from start to finish. In addition, we are one of the only electronics companies that own and continue to develop innovative technologies for both the consumer and professional print markets and many of these products will be unveiled at this year's Photokina show, one of the most important industry events in the Canon Europe calendar."

    Canon Consumer Imaging

    Photokina marks the 15-year anniversary of EOS as a brand. Canon is announcing two new EOS models at the show - the world's highest resolution Pro-camera, the EOS 1Ds and the EOS 300V, which is predicted to become the world's number 1 selling SLR camera.

    The EOS-1Ds features the first ever full frame 35mm CMOS sensor with 11.1 million effective pixels. The EOS-1Ds capture astounding detail & colour, almost doubling the resolution ordinarily considered state of the art for a digital SLR camera in the world today.*

    Also new this year are three digital still cameras, all featuring the new high performance DIGital Imaging Core (DIGIC) processor. One of the trio, the Digital IXUS v, is claiming the position as the world's smallest 3.2 Megapixel digital camera with optical zoom and LCD monitor.*

    Along with the new additions to the camera line up, Canon is announcing Canon Imaging Gateway (CIG), a digital imaging web site, which Canon Europe sees as the vital missing link in Customer Relationship Management (CRM) by creating a one-on-one communication channel to consumer users.

    The online solution will allow users to download updates for their digital cameras, in much the same way that mobile phone users download personalised ring-tones. CIG also offers other services online, such as photo albums, photo-printing.

    Canon Business Solutions

    Canon, recently named one of the world's 'Innovation Elite' by Reuters Business Insight, will also announce the decision by its Business Solutions division to target high-street mini labs with its new range of industry-leading, large format printing devices.

    On stand at the show, Canon will be demonstrating how large format devices, such as the W2200 and W7250, will offer the photographic and photo finishing markets innovative solutions to reproduce digital images in poster size, with speed and ease.

    Accessible, easy to use, large format Canon printers will be installed in high street photo labs, a move that the market leaders see as a natural progression in the digital revolution. Consumers will be able to turn images from a digital camera, CD, floppy disk, print or negative into large scale versions of their images within an hour, at a considerably lower price than traditional photographic enlargements solutions currently on the market.

    * As of September 2002

    About Canon Europe

    Canon Europe is a subsidiary of Canon Inc. of Japan, a world-leading innovator and provider of imaging and information technology solutions for individuals and businesses.
    Canon Europe is a subsidiary of Canon Inc. of Japan, a world-leading innovator and provider of imaging and information technology solutions for individuals and businesses.

    The main business focus for Canon Europe is in two clearly defined markets: Business Solutions (network peripherals: photocopy, printer, scanner and fax solutions) and Consumer Imaging (Input Solutions: photographic equipment including analogue and digital cameras and camcorders; and Output Solutions: Bubble Jet and other printers).

    Canon Europe also provides Industrial Products including broadcast lenses, semiconductor and medical equipment.

    Canon Europe employs more than 12,000 people across 19 countries.
  • by e40 ( 448424 ) on Wednesday September 11, 2002 @07:42PM (#4241483) Journal
    though this camera will undoubtedly be used by pros. Most people don't realize how big a file an 11mp camera would produce at the highest quality setting, not to mention raw mode! I have a D30 (3.25mp) and the best quality jpg's are around 1mb. The D60 doubles that. Once you get a large number of images, size matters. I have 10+GB of D30 images. It means you have to have a good backup solution (read: not CD-ROM).
    • I have 10+GB of D30 images. It means you have to have a good backup solution (read: not CD-ROM).


      A DVD burner costs less than an 11 megapixel camera.

    • by Mwongozi ( 176765 ) <slashthree.davidglover@org> on Wednesday September 11, 2002 @07:45PM (#4241503) Homepage
      The usable resolution of 35mm in a "consumer" camera is about 7 megapixels. Double that for a professional.

      This camera is probably the first to match the quality of a decent 35mm camera.

      • by e40 ( 448424 ) on Wednesday September 11, 2002 @07:49PM (#4241526) Journal
        This camera is probably the first to match the quality of a decent 35mm camera.

        My D30 images printed professionally are indistinguishable from 35mm prints up to 20x30. Sooooo, you'll have to qualify your statement for me to believe it. Note that the quality of lenses (I use Canon L glass) contributes significantly to image quality.

        • My D30 images printed professionally are indistinguishable from 35mm prints up to 20x30. Sooooo, you'll have to qualify your statement for me to believe it. Note that the quality of lenses (I use Canon L glass) contributes significantly to image quality.


          When printing pictures of what?

          of a Landscape far away? Ok sure I'll give you that.

          Of a portrait? Well maybe if you do not really want those skin blemishes* to show up. . . .

          When scanning 35mm photographs in for reprocessing I typically use 1200DPI minimum, and end up working with images that weigh in at around 50-70MB or so. This is for a 3x5 mind you. . . . for a 20x30, heh. Hell I wouldn't enlarge 35mm to 20x30, yeesh.

          Oh, and what are you using to print your images with? I want a photo printer that goes up to 20x30. :-D

          *or texture of the material or strands of hair or so forth and so on.
        • you'll have to qualify indistinguishable...

          if i got right down to it with a 200x magnifying glass, would you feel confortable giving me a 35mm 20x30 and your 'professionally printed' digital 20x30? doubtful.

          with lens photography there is infinate amount of raw data, but (he is claiming) ~10 million effective pixels in a decent camera. so with 11.1 mp, you capture all the effective data, but still miss the fluff. it would perform equally under a microscope after being 'professionally printed'
          • with lens photography there is infinate amount of raw data

            This statement is simply not true. Any lens system is ultimately limited by diffraction, and you cant get away from it. No lens can completely focus anything, there will always be diffraction effects which act to blur fine detail at some level.

            Additionally, film is a poor way to judge any systems detail/resolution, since film grains or dye clouds in slides have a finite size that is definitely larger than the pixels in todays modern CCD cameras.

            Film has one thing going for it, it is available in large sizes.

            Ultimately, the 11 megapixel cameras $6000 price will keep it mostly in the hands of people who need the resolution -- those people making large prints.

        • If you are printing things out at 20x30", you are likely printing on a designjet or similar printer. Your 35mm pictures are probably of better wuality (or could be) but you are limited by the resolution of the printer. It's hard to say, because you didn't mention how you were getting your prints so I am just guessing.
        • This camera is probably the first to match the quality of a decent 35mm camera.
          Note that the quality of lenses


          So where does the quality of the film come into it,
          or does that matter that much?

          Plus where do you get it developed or do you do that yourself?

      • by MongooseCN ( 139203 ) on Wednesday September 11, 2002 @09:18PM (#4241973) Homepage
        If you buy really good, really slow speed film that has minimal grain, the film can hold a little less than 20 megapixels of data. But to get a good quality shot that will have enough detail to fill all that information, you need to have a very steady tripod, a very good quality lens and perfect focusing and exposure.

        I have a new film scanner I use that has made scans up around 5500x3600 pixels. That's about the highest one needs to go to get all the information out of an image. Oh and that comes out to about 19.8 mega pixels, which is about a 60 meg uncompressed file (24bit RGB). You can also scan in using 16bit RGB channels resulting in an image around 120megs.

        And think, that's just 35mm film, which is about 1 square inch. Imagine what a large format camera can shoot with it's 8x10" film. And the film can be even larger than that!
    • You act like having the ability to take an *occasional* hi-res photo is a bad thing.

      And even for people that are planning on taking nothing but 11Mp photos, if they can afford the camera+microdrive, more power to them. They're welcome to help support new technology if they wish.
    • Once you get a large number of images, size matters. I have 10+GB of D30 images. It means you have to have a good backup solution (read: not CD-ROM).
      Sure, but with IDE storage approaching $1/gigabyte, all of the sudden a 3MB image doesn't seem that large when you can house roughly 35,000 of them on a disk.

      And as far as back up goes, you can just buy another drive!
  • won't replace film (Score:5, Insightful)

    by 0111 1110 ( 518466 ) on Wednesday September 11, 2002 @07:43PM (#4241487)
    Pretty impressive, but you still can't get the constrasts and subtle shadows and depth that you can get with film. I still happily use a 2mpixel camera. I don't usually print my photos and my monitor can't go past 1200x1600 anyway.

    Perhaps what's most impressive about this leaked announcement is that Canon is not playing the release only in small increments game that companies usually do. Why release a product 4 times better than your competitors when you can keep releasing disabled products for the next 4 years that will still beat your competitors by 10% every year. Do you think Intel would just go ahead and release a 40 Ghz processor next week if they could figure out how to do it? The question is are they going to have 11mpixel cameras in their consumer and prosumer lines or just in their professional cameras?
    • Have you seen uncompressed raw .tiff files from Canon's D60 (which this will be upping)? There are the throw away 2, 3, 4, whatever, megapixel consumer cameras. They keep boosting the MP rating, but doing nothing about color depth. On the other hand Canon's professional digital cameras are very sensitive to highlights and shadows.

      This isn't that big of a jump over their highest professional camera at this point. I guarantee this is only for their professional line.
    • Pretty impressive, but you still can't get the constrasts and subtle shadows and depth that you can get with film.

      That's only true in some sense. Many people compose multiple digital images at different exposures in order to get _greater_ range than film.

      see this link: compositing [fourchambers.org]

    • Why release a product 4 times better than your competitors

      It's not 4x better. There are already rumors of other 10M+ cameras.

  • by Myriad ( 89793 ) <myriad@the[ ]d.com ['bso' in gap]> on Wednesday September 11, 2002 @07:43PM (#4241492) Homepage
    ...that goes up to eleven!

    I wonder how many engineers died choking on someone elses vomit?

  • Heh, cool (Score:2, Interesting)

    by Sludge ( 1234 )
    Somehow I would expect my press releases to go farther if I released them, and then took 'em back for a couple weeks. Makes you feel like you have the inside story when you tell your friends.

    I wonder if this is a strategy that can be employed to promote the product... naw.

  • Just curious... (Score:3, Interesting)

    by bravehamster ( 44836 ) on Wednesday September 11, 2002 @07:44PM (#4241500) Homepage Journal
    What is the resolution of the human eye? Have these cameras begun to approach or even surpass the amount of visual data the human eye is capable of collecting. I'm no biology major, but I know there's a finite number of rods, cones and whatnot in there.

    • The resolution of the human eye is not the issue. The issue with cameras is always how big you can blow up the image and have it still look good.
    • Thing is, it doesn't matter... the higher number of pixels a camera can record, the more flexibility the guy back at the shop (whether it's a web site or a print publication) can zoom in and crop to with finer images as the result. No professional shop(one that can afford $6k for a camera) will just take a pic and be happy with it, there is a certain amount of image manipulation that has to be done and the more recorded pixels, the better.
    • Re:Just curious... (Score:3, Informative)

      by Mantrid ( 250133 )
      This is a pro level camera. We're not just talking 8x10 glossies - but poster size and larger. I'm not sure though where 11 Mpixels would measure up to - it would definitely be tangling with 35mm, but medium format and larger (medium format has like 3.5" film size) is probably still going to be a lot better!

      Also if you have the optics to match and take a picture and want to zoom in you need that extra resolution. With something like medium format a small portion of a regular picture can be enlarged to regular view sizes without just going all blurry - stuff like that will drive digital camera resolutions on the pro level anyways - where lack of resolution very quickly makes things go all pixely.
    • Particularly with a large print, you're going to give your full attention to only a portion of the print at any one time. So, even if the eye can only see 800x600 or whatever (though calculations like this are pretty misleading because the eye does all sorts of image processing tricks and has non-uniform sensor density, IIRC), that doesn't mean a higher-resolution image is a waste.
  • Well, the next time I have $6k lying around and don't want to do things like buy cars or computers or tons of other cool stuff with it, I'll consider getting one of these.

    This isn't really for the average layman, at least that is obvious. Is it only news on slashdot because some web author screwed up while he was proofing the draft? Mabye not. 11 megapixels is a huge jump (twice the current high-end professional ones).

    The biggest question, however, is how many megapixels are needed before the quality is on par with analog cameras.
  • by SWPadnos ( 191329 ) on Wednesday September 11, 2002 @07:48PM (#4241522)
    The real news here is that the sensor is full-frame 35mm. That means that they can make a digital back for a standard 35mm camera (or a digital camera in a 35mm body, like most small pro cameras), and you will get full frame shots (ie, what you see in the viewfinder is the same as what will be on disk).

    The other good news is that they didn't reduce the pixel size to increase the resolution. This gives better image fidelity (contrast and color saturation). That's the funny part about digital camera resolution - they keep increasing the number of pixels in roughly the same sensor area - they get fewer photons per pixel, but more pixels per frame.

    This should be cool (I'll check it out at Photokina)
  • by epukinsk ( 120536 ) on Wednesday September 11, 2002 @07:52PM (#4241549) Homepage Journal
    People go on and on about how high the resolution on a camera is, but I rarely take a picture with my 2 megapixel camera that's sharp enough to take advantage of all 2000 of those pixels. If I jitter the camera just slightly, I cut the effective resolution in half. Most of the time I could've taken the picture at a lower resolution and scaled the picture up in the GIMP and gotten the same damn picture.

    What I really want is a more sensitive CCD that can take sharper pictures with less light and more brilliant color. A razor sharp 1600x1200 picture can be printed at nearly any size and look great. Unless you have nerves of steel to hold the camera steady, you're not going to be able to take a picture sharp enough to take advantage of 11 megapixels. Unless it's high noon in Arizona and the blinding sun is at your back, your CCD just won't be fast enough.

    Erik
    • How about a tripod and an external trigger? _I_ might not have nerves of steel but that doesn't mean the camera has to move a millimeter.

      There are times when you want a high quality camera and can't set up the shot, but they are probably the minority of cases.

      You're right though, faster reading of the light would be very useful. It isn't like we need to wait for the film to develop anymore.
    • What most people don't realize is how important the optics are in a digital camera. When you have more than a couple of megapixels, the advantages of better lenses becomes starkly clear.

      Having a high senstivity (higher ISO, such
      as ISO 800 or ISO 1600), as seen in high end
      digital cameras, lets you take picture under
      even the most demanding light conditions.

      Higher shutter speed (1/2000 or fasters) lets
      you eliminate handshakes and take clear pictures
      of action shots.

      All this of course, requires that your lens passes
      ample light, and produce low chromatic and spatial aberrations. A good SLR lens, though, we cost you more a thousand dollars.

      Having said that, the advantages of greater pixel count scales the picture quality linearly given good enough optics.

    • What I really want is a more sensitive CCD that can take sharper pictures with less light and more brilliant color.

      On modern cameras, you can boost the gain on the CCD (this is often called changing the ISO equivalent setting, as if you were going to higher speed film). The problem, of course, is you get more noise when you boost the gain like that-- similar to when you go to a higher speed film.

      The real answer, for film and digital cameras alike is, unfortunately, "Invest in a tripod." If you can't get the thing to a reasonable F-stop and still have the aperture open less than 1/60 of a second, you're gonna probably have a miserable picture if you're shooting it by hand.

      I'd like to see more sensitive CCDs, too, but the film camera people have wanted more sensitive film that wasn't so blasted grainy for decades now, and they haven't gotten it, either. :)
    • My Camera w/Lasers (Score:5, Interesting)

      by Myriad ( 89793 ) <myriad@the[ ]d.com ['bso' in gap]> on Wednesday September 11, 2002 @08:29PM (#4241751) Homepage
      People go on and on about how high the resolution on a camera is, but I rarely take a picture with my 2 megapixel camera that's sharp enough to take advantage of all 2000 of those pixels. If I jitter the camera just slightly, I cut the effective resolution in half. Most of the time I could've taken the picture at a lower resolution and scaled the picture up in the GIMP and gotten the same damn picture.

      I think the issue you are having is more to do with your particular camera or camera model & lense than it is to do with the megapixel count.

      I took these pictures [ebay.com] of a laser I'm selling on eBay. Lasers are notoriously difficult photography cleanly without then photo editing them. I shot them with a Canon Powershot G2 4.0 megapixel camera and they look great.

      Previously I had been shooting with a Canon Powershot Pro IS90 which did 2.6 MP. Even when shooting the G2 at lower resolutions the images are consistently better than the IS90. Why? Better lens and CCD.

      However, you say:

      A razor sharp 1600x1200 picture can be printed at nearly any size and look great. Unless you have nerves of steel to hold the camera steady, you're not going to be able to take a picture sharp enough to take advantage of 11 megapixels.

      Stability isn't the issue. Exposure is. If you use a faster shutter speed blur will be less of an issue. The resolution you set the camera to will have nothing to do with it.

      Additionally, if you plan to print at higher than 72dpi (yetch) you will need a higher resolution image to get the same width & height dimensions on the printed page. Which means more pixels!

      I'd be interested to know what kind of camera that you are using that needs such a slow exposure to generate a decent picture. It sounds to me you have a camera that is doing less than midrange digitals currently can. Nevermind highend ones.

      • It's a Canon Powershot S110. Mostly it's in low light situations that blur becomes an issue. In full daylight the pictures are fantastic, but when there's not a lot of light around I can't take pictures worth crap.

        I agree that exposure time is the issue--the problem is the camera wants a certain amount of light to expose the picture. In order to get enough light in a shorter amount of time you need a more sensitive CCD, otherwise you'll sacrifice the dynamic range.

        Erik
      • by cr0sh ( 43134 ) on Wednesday September 11, 2002 @08:46PM (#4241827) Homepage
        Wow! I love those pictures of the laser - I wish I had the cash (and a good reason, other than "play") to bid on it - the pictures of the beam in an unsmoked and lighted room - a rod of blue light! Cool! I love it! Talk about a powerful laser - damn! (guess I will just have to play with my cheapo HeNe).
    • How??
      I set my cannon D20 to 1/1000 speed shutter and I can STOP the spokes on a motorcycle that is driving 80 MPH.

      so you are telling me that you shake so badly that you are moving faster than the spokes of the front wheel of a motorcycle speeding down the highway?? Cut down on the caffeene man... or get some help from your doctor.

      Aside from the silliness.. It is not difficult at all to take a proper picture with most any digital camera IF you use proper photographic technique.... you hold your breath when you finally click the shutter dont you? and you press the button in 1/2 way to let it autofocus and notify you it's ready for a shot right?

      99% of all failed photos are because the operator is not using the camera properly.. Digital or Chemical film.
    • It's not just the sensor that's important. It's the lens is often the limiting factor.

      That's why a professional photographer (film or digital) will happily drop $3500 on something like a Canon EF 300mm f/2.8L IS (Image Stabilizer) USM lens, when a lesser 300mm lens costs $300. Or spend $2500 on a 50mm f/1.0L USM when a basic 50mm lens is only $75.

      It's not just lens-envy, either. Spend more and you get tack-sharp optics and smoother focusing, and with a brighter (faster) lens like that you can get amazing low-light capabilities and depth-of-field effects. And if your exposure is still kinda long, Image Stabilization (IS) will also help compensate for those slight jitters you mention (and it really does work - if I have to, I can take handheld photos with reasonable sharpness at .25 second exposures.)

      I'm no pro and I can't afford the very best L-Series professional lenses for my D30. (Though I did splurge on a 50mm f/1.4 USM for portraits.) I make do with the best consumer lenses and accept the limitations imposed by my wallet and my skills. But don't misplace the source of the limitations or underestimate what can be done with current technology.
  • Lets hope they didn't pull a Palm and its really 10.9993949929 Megapixels. Whew, dodge a bullet there.

    But in all seriousiness. I sure hope it's really 11 Megapixels and not "11 Megapixels if you count these as individual pixels even though the industry standard doesn't, rar rar rar rar rar.."
  • by Spire ( 101081 ) on Wednesday September 11, 2002 @08:10PM (#4241650)
    Given that the camera was quoted as having "11.1 megapixel" resolution, and that the nominal aspect ratio of 35mm film is exactly 1.5:1, I'd guess that the pixel dimensions of an image from this camera are 4096x2688. (This works out to 11,010,048 pixels.)

    To get as close as possible to 11.1 megapixels while retaining a nice horizontal dimension of 4096 pixels, the vertical dimension would have to be 2710 pixels. However, 2710 isn't a typical "round" binary number, so the actual dimension is likely to be 2688 (11.01 MP), 2752 (11.27 MP), or 2816 (11.53 MP).
  • by Animats ( 122034 ) on Wednesday September 11, 2002 @08:18PM (#4241695) Homepage
    Sinar announced a 22 megapixel camera [dpreview.com] last week. All Canon has is the biggest sensor that's compatible with 35mm lens systems.

    Of course, you have to divide those pixel numbers by 3 or 4 to get a useful pixel count. Camera makers like to count each color as a separate pixel. Tacky.

    I'm waiting for Foveon [foveon.com] technology to go mainstream. All the colors for each pixel are sensed at the same location, so you don't get color artifacts on sharp edges like you do with other digital cameras. So far, they only make super high end cameras, but I went to a talk by their CTO, and the device isn't inherently expensive if made in volume.

    • The Foveon tech has a couple major problems, manufacturing cost is the most important to the company, but really high noise for the pixel count is the ones that most DP people are talking about. A few of the test images from a near production foveon got released and someone did a noise measurement on it, it was about as bad as a $200 2MP camera.
    • All Canon has is the biggest sensor that's compatible with 35mm lens systems.

      The Contax N1 has the same size one, the cool trick is it's the same size the image area of a 35mm film frame. Meaning that a 50mm lens on this camera has the same effective focal length than on a 35 mm film camera, and not subject to the infamous digital camera multiplier effect [lonestardigital.com]. Anyone with a decent investment in lenses, especially wide angle ones, will drool over the sensor size more than the pixel count.
  • Real advantages (Score:4, Informative)

    by Elequin ( 137149 ) on Wednesday September 11, 2002 @08:22PM (#4241722)
    Yes, it's 11 megapixel, which is great for very large prints. This also means that photographers using the camera will have that much more space to crop and still come out with a printable photo.

    The other advancement that is very important is that it is a full-frame CMOS sensor. 35mm film is 24mm by 35mm. Today's digital cameras use sensors that are smaller than this. The side-effect of this is that you end up with what some call a focal-length multiplier. The Canon D60 digital SLR has a 1.6x focal-length multiplier, meaning that a 100mm lens turns into a 160mm lens. It doesn't really multiply the focal length, it just crops the image to only record the center portion of the lens' field of view.

    This is great if you want to really zoom in on something, but if you're looking for wide angle, you have to buy expensive super-wide angle lenses to get the same effect. Now with a full-frame sensor, you actually get the focal length of the lens you buy.

    This is speculation, but I imagine the 's' in 1Ds stands for studio. The Canon EOS 1D is a great pro digital SLR - it has super-fast AF, is built like a tank, has seperate color spaces, and can shoot up to 8 frames per second! However, it's 4 megapixel. The 1Ds is 11.1 megapixel, and will probably only be able to shoot about 2 to 3 frames per second. Perfect for the studio - not that great for sports photography.

    I'm very interested to see/hear about the other improvements Canon may have made in the 1Ds!

    - Eric, a Canon EOS D60 owner
  • This 1 GB Microdrive I've used suddenly becomes obsolete if you're a fan of compressed RAW images (as my Canon S40 and I are).
  • by Anonymous Coward
    1) Aim camera.
    2) Press button to activate shutter.
    3) Push 500 MB file through USB connection to attached network storage drive.
    4) Watch hard drive light for 30 seconds.
    5) Wait.
    6) Send to grandma's AOL dial-up via your own AOL dial-up.
    7) Tell everyone to hold still again.
    8) Repeat.
  • by dan501 ( 223225 ) on Wednesday September 11, 2002 @08:42PM (#4241811) Homepage
    I have a canon s40 [powershot.com] which is a pretty decent digital camera.

    my only really big complaint about it is depth of field. except in extreme scenarios, EVERYTHING is going to be in focus with that camera. depth of field is one of the most important tools of photography to emphasize what you want to emphasize in the picture.

    because the CCD is so much smaller than 35mm film, the lens is shorter. to accomodate the shorter lens and smaller sensor, the aperature is smaller than 35mm equivilent.

    the 3 big ingredients to controlling depth of field are aperature, lens length and distance.

    with todays smaller than 35mm digital cameras, the aperature is significantly smaller than 35mm equivilent (greater DOF)
    the lens length is significantly shorter than 35mm equivilent (greater DOF)
    so all you have is distance...

    if you focus on something 2 feet away, maybe something across the street will be somewhat out of focus.

    with a 35mm camera (digital or film), you can focus on something 2 feet away and then you, the photographer, can choose whether you want the thing across the street to be almost perfectly in focus or so out of focus that you can't even distinguish whether it's a tree or if it's a building.

    this kicks a lot of ass.
  • Just a quick comment on megapixelling. Many in the camera world would have you believe that pixels == effective resolution of pictures. This is not true. The resolution of the CCD is analagous to the resolution of the film in a normal camera. As resolutions get higher, film is generally not the limiting factor to the sharpness of an image (or the color saturation, for that matter).

    We tested a nice consumer level 6 MP (IIRC) camera informally with an odd shaped object. We found that we could not discern the shape of the object from a distance under any conditions, even though the camera clearly had enough pixel resolution to do so. (Yes we checked lossy compression was off) Therefore, the effective resolution was less than the resolution of the CCD. So maybe (not tested with our tests) a lower resolution camera will give similar results with a blow up in photoshop? I don't know, there are many variables.

    In an SLR camera, light has to pass through as many as 15 glass elements before the light hits the film, these elements usually form the basis for the limiting resolution, not the film. So maybe you 6 MP fanboys don't need penis envy over the 11 MP camera afterall.... What we need to see is a affordable digital SLR that can take AIS (for nikon) or equivalent lenses so we aren't stuck with stock glass.

    -Sean
    • Flamers can note I realize the camera in question is SLR with interchangeable lenses. But it is not affordable at 6,000.... Nor is it clear that the lenses in optimal conditions (high shutter speed, f-stop sweet spot) have a 11 MP effective resolution.

      -Sean
    • Did you sonsider that the lower resolution was actually caused by the interpolation functions of the camera itself? Those CCD "pixels" are not copied one by one into a file. An interpolation algoritm is run on the "data" to smooth out the edges of the pixels as well as alighing the RGB components (Which are offset in all current cameras). This has a severe blurring effect on the image data. It is most noticable by photographing text at various distances.

      What you found is true, the actual resolution of a digital camera given a specific sharpness is about 1/4 the physical resolution of the CCD. But this also means that yes, a higher resolution CCD will give you a higher resolution image. So an 11MP camera WILL look better than a 5MP camera (Assuuming that the lens systems are not total crap)

      BTW the glass elements of a camera do NOT limit the resolution of the film much at all (Again unless were talking total crap optics like in a 110 snappy camera). The size of the film grain does. ASA 100 film is much sharper than 400 becuase it has much finer grain.
      • BTW the glass elements of a camera do NOT limit the resolution of the film much at all (Again unless were talking total crap optics like in a 110 snappy camera). The size of the film grain does. ASA 100 film is much sharper than 400 becuase it has much finer grain.

        Your points are taken, but the above quote is *not* always true, IMO. This is why we have lens tests. You are probably used to a so called "normal" or 50mm (w/ 35mm film) lens. Generally telephoto lenses are much lower res and look soft compared to sharp photos.

        -Sean
  • by spun ( 1352 ) <loverevolutionary@@@yahoo...com> on Wednesday September 11, 2002 @08:52PM (#4241848) Journal
    I have a friend who's the head of a professional photographers guild in Hawaii. She explained why (a few years back) she thought digital photography would be a long time overtaking conventional photography. Film delivers the equivalent of about 14 megapixels. More importantly, film has far greater dynamic range than most digital processes. This means (as a previous poster mentioned) that you can shift color and contrast quite a bit without losing information.

    High quality magazines print at 187 lines per inch (not DPI as another poster states, there IS a difference). In order to provide decent color information, a source file should have a DPI of twice the line screen, or nearly 400 DPI at 24 bit color for a high quality print. Say the magazine is 8.5x11 and you are printing a full page ad. You need 3400x4400 pixels for best quality.

    So a professional 35mm that gives you the full 14 megapixels is good enough. This new 11 megapixel camera still isn't. This is not even counting larger format printing, like posters, which though usually printed at a lower line screen than 187, are much bigger than 8.5x11. This is why medium and large format professional cameras use larger film for even more resolution.
    • Interesting, I've found the exact opposite to be true. I'm going to first assume you're talking about slide film, which has a dynamic range of about four stops, since that's what most people are shooting professionally (save for photojournalists and wedding photographers).

      I've found that the shadow detail in digital cameras (specifically the canon d60) can be absolutely stunning- through some Levels adjustment I've been able to take parts of a digital image that appear completely black, and get excellent detail out of them, something I'd never be able to do shooting on transparencies.

      I'd recommend a look at Michael Reichmann's site, where he reviews the D60 vs. 35mm vs. Medium Format [luminous-landscape.com] and concludes that for up to 11x17 prints, the Canon D60 is at least as good as 35mm. Furthermore, I've personally found that the raw images delivered by my D60 look better on screen and in print than scanned in images, since the pixel quality simply seems better (despite using a top of the line film scanner that's optimally configured).

      In closing, as a professional photographer, I've never had a client need anything more resolution than what I've been able to deliver digitally.

  • As I said in This [slashdot.org] post 12MP is about what you need to match 35mm film. This is close enough that it probably doesn't matter. You can make some big ass posters with these images without seeing any graininess. My friend has a 5MP camera and you can already make A size plots that are indistinguishable from photos.
  • by Buckbeak ( 591708 ) on Wednesday September 11, 2002 @09:12PM (#4241949)
    "I can't imagine anyone needing a digital camera with more than 640K pixels" -- Bill Gates 1973.
  • Anybody else notice that the newest story has been there for like 30 minutes with still no first post?
    What's going on?
  • Film vs. Digital (Score:4, Informative)

    by Polo ( 30659 ) on Wednesday September 11, 2002 @10:10PM (#4242098) Homepage
    Here is a very good article comparing
    Film vs. Digital [clarkvision.com]

    Bottom line: This camera can beat some 35mm films in resolution, but not all of them.

    Digital still has a long way to go:
    8x10 format film is equivalent to ~1000 Mpixel
  • Full frame, woohoo!! (Score:3, Interesting)

    by cant_get_a_good_nick ( 172131 ) on Thursday September 12, 2002 @12:14AM (#4242582)
    The best part about this it's a full frame CMOS sensor, meaning it has the same 24mm x 36mm frame size as a 35mm film frame would. Almost all other CMOS sensors (outside of the Contax N1, who$e co$t i$ not an ea$y $um to $ave for) are smaller than the standard 35mm frame. This changes the effective focal length of the lens, making it a longer lens. A 15mm superwide lens on a normal 35mm frame becomes a 22mm effective focal length on say a Canon D60. (As a side effect, because of this, all of the superwide SLR lenses are backordered, mine has been on order almost 2 months, grumble grumble.) Now you can buy a lens for your film camera and have it be exactly the same effective focal length for your digital cam. I have a Canon film SLR, good camera. I like the fact that now there is a decent upgrade path, though it pretty much is a given that this would have happened eventually.

"When the going gets tough, the tough get empirical." -- Jon Carroll

Working...