Catch up on stories from the past week (and beyond) at the Slashdot story archive

 


Forgot your password?
Close
typodupeerror
×
Technology Science

Nanotubes Start to Show their Promise 329

Posted by CowboyNeal from the now-lay-me-some-sugar dept.
Rei writes "Researchers at the University of Texas at Dallas have developed the highest quality nanotube sheets to date (the team previously set strength records with polymer-nanotube composites). Producable at a rate comparable to commercial wool spinning, the transparent cloth has exceedingly high conductivity, flexibility, has huge surface area to volume ratios, can potentially be made into very effective OLEDs and thin-film photovoltaic cells, and outperforms even our best bulk materials (such as Mylar and Kevlar) at strength normalized to weight. It strongly absorbs microwaves for localized heating (leading to applications in seamless microwave welding of sections and even windshield warming), changes conductivity little over a wide temperature range (very useful in sensors), and is expected to be used in commercial applications very soon. The research should even be expandable to artificial muscles! To head people off, while the exact tensile strength is not listed, it sounds like it is still far from the >100 GPa needed for a space elevator. Anyways, here's to process advancements!"
This discussion has been archived. No new comments can be posted.

Nanotubes Start to Show their Promise More

Nanotubes Start to Show their Promise

Comments Filter:
  • I'd like to see these sort of things geared up with 'smart' nanotechnology to make 'smart' cords and stuff like that, imagine a highly conductive wire that provided +, - and ground and detangled itself, or melted into a pool and you just pulled cord out of it, all detangled or bent into whatever shape you want.

  • Hurm... (Score:5, Funny)

    by ErikZ ( 55491 ) on Friday August 19, 2005 @05:02AM (#13353936)

    Oh good. I wonder how much it will cost for a packet of laser printer paper made of this stuff?

    I could use something snazzy for my resume.

  • Miracle (Score:2, Funny)

    by Anonymous Coward
    And yes, folks, it cures most deceases and will get rid of that bronchitis for you and you can use it to clean your hubcaps.

  • Space elevators (Score:5, Insightful)

    by onion2k ( 203094 ) on Friday August 19, 2005 @05:03AM (#13353938) Homepage
    To head people off, while the exact tensile strength is not listed, it sounds like it is still far from the >100 GPa needed for a space elevator.

    Why do they say they're going to enter the material into some space elevator competition at the end of the article then?

    • Re:Space elevators (Score:5, Insightful)

      by MaestroSartori ( 146297 ) on Friday August 19, 2005 @05:12AM (#13353958) Homepage
      The authors also say that,
      with further tweaking, their nanotube sheets may be useful for building a space elevator tether. They're planning to put the sheets to the test by entering the Spaceward Foundation's Elevator:2010 contest.


      Emphasis mine. Seems to suggest that they think they're not too far away from it, so you're not totally off the mark, but we all know that the last few tweaks can be the bit that don't work, relegating this to other uses...

      • Re:Space elevators (Score:5, Insightful)

        by $RANDOMLUSER ( 804576 ) on Friday August 19, 2005 @05:32AM (#13353997)
        That's just modern journalism.
        It used to be Who What When Where and How, now it's May Might Could HelpTo and SomeDay.

      • Re:Space elevators (Score:3, Interesting)

        by jafac ( 1449 )
        I remember a meeting of the Chicago Society for Space Settlement* at the Adler Planetarium back in 1978 where space elevators were discussed. Even back then, they knew that carbon-fibers were about the only material that could potentially be strong enough.

        It's taken a very long time to get here (I was just a kid at the time), and I pretty much have always dismissed the idea of space elevators, but it's kinda neat to see that the concept is evolving along the same vein as over two decades ago.

        *(CSSS merged

        • Not science fiction according to IEEE Spectrum (Score:5, Interesting)

          by Zordak ( 123132 ) on Friday August 19, 2005 @12:07PM (#13356260) Homepage Journal
          This month's IEEE Spectrum [ieee.org] features an article [ieee.org] by Bradley Edwards who studied the near-term feasibility of a space elevator under a grant from NASA. His conclusion is that it could be accomplished in as little as 10-15 years and for as "little" as $10B (meaning little enough that there are several individuals on Earth who could fund it privately). Of course, the major technological limitation is the nanotubes. He suggests "spun" nanotubes (like yarn) or nanotube composites (and he contends that if one of these broke near the top, it would not be the end of life as we know it -- it's a ribbon that would loft gently down to Earth and burn up in the atmosphere). He even addresses storms, terrorism and space-borne threates. It's a good article and somewhat technical (written for engineers). His conclusions are quite credible, and probably more informed than your average Slashdot debate.
    • And it has absolutely nothing to do with the technology. It's all about the economics.

      A space elevator is going to require a truly civilisation shaking level of investment by a country. Then, once it's built that investment has to be amortized over it's lifetime, but wait, it only has two end points and it takes a certain amount of time to load and unload a vehicle of cargo and passengers, it takes a certain amount of time to travel the distance up to orbit. These two fundamental physical limitations will m
      • why are you limited? load 100 vehicles about 1 hour apart on the elevator....

        • Re: (Score:3, Insightful)

          by account_deleted ( 4530225 )
          Comment removed based on user account deletion

          • That's simply not true. Read the calculations done by Edwards. Basically, the more affordable the elevator is is almost completely premised on one technological factor: how strong your ribbon is per unit weight. Nobody is proposing building a space elevator with, say, a 10 GPa ribbon, because the launch cost for even a preliminary ribbon. On the other hand, if you have a 120 GPa ribbon, the launch cost is trivial. Yet, both hold the same amount of payload - one is just the tiniest fraction of the total
          • Paragraph two is mostly right anyway.

            First one is wrong regarding total payload mass. I'd do math to refute the statement, but it has already been done. http://trs.nis.nasa.gov/archive/00000535/ [nasa.gov]

            And yeah, the travel time will likely be few days. So what? You can get to LEO in a matter of hours once everything has been built out and systems put in place to deal with any whiplash effects that jumping off before the steady-state altitude.

            And it isn't 50K miles to Geo -- it is about 24K miles. I point this out s

  • Does this mean? (Score:5, Funny)

    by mikeophile ( 647318 ) on Friday August 19, 2005 @05:03AM (#13353939)
    I can soon have a solar powered bulletproof jacket that enhances my strength, protects me from cell phone emissions, and displays DVDs?

  • flexible screens..? (Score:5, Funny)

    by welshwaterloo ( 740554 ) on Friday August 19, 2005 @05:03AM (#13353940)
    The research should even be expandable to artificial muscles!

    Or, from the article, and perhaps of more interest to us:
      "flexible computer screens that could be rolled into a sack"

    Haven't we been promised this for years? I wanna roll up my computer screen & carry it into my flying car!

  • How about... (Score:5, Interesting)

    by markild ( 862998 ) on Friday August 19, 2005 @05:03AM (#13353941)
    ...the cost?

    I know tfa says that it will be efficient, but does that take the cost into perspective? It's not unusual to hear about a new idea that is totally ground braking in several fields, then the research on the commercial fades out, because they find out that it's too pricey. A lot of products was that way in the beginning. Just look at LCD screens etc.

    Well. That being said. This sound awesome, I'd like to see it developed...

    • Re:How about... (Score:3, Insightful)

      by dbIII ( 701233 )
      ...the cost?
      Cost isn't determined in the lab where the stuff is invented at the time of invention - it's worked out later when it becomes clear that there is more than one way to make something and the best way can be taken advantage of. The first few transistors cost a fortune each to produce, as did aluminium for the first few years. We make both in a different fashion now to the first processes used to make them.

  • Producable at a rate... (Score:5, Informative)

    by ArbiterOne ( 715233 ) on Friday August 19, 2005 @05:03AM (#13353942) Homepage
    Yes, it's producable at a certain rate- but what about the cost? Is it economically feasible?
    Unfortunate about the space elevator. Looks like the highest we've gone is 63 GPa (http://en.wikipedia.org/wiki/Tensile_strength [wikipedia.org])

    • The certain rate at which it's producable would be the rate at which wool is woven commercially. Come on, man. Get with the program.

      The steps involved [wool.com] in the wool-producing process include

      • Scouring
      • Carding
      • Combing
      • Drawing
      • Finisher drawing
      • Spinning

      In the year 2000, the US wool-making industry produced 46.5 million pounds of wool, averaging out to 3.875 million pounds per month. Obviously the rates of wool production vary greatly with the season. In fact [woolgrowers.org], more than half of American-produced wool is shorn

    • The article stated the goal was 100 GPa (gigapascals...a measure of stress) tensile strength. The parent mentions the highest measured strength to date comes from a single-walled nanotube that bore 63 GPa (double-walled will theoretically hold more). To give you a comparison, I've pulled ultimate tensile strengths of common materials from matweb.com [matweb.com] (note these are in MPa, not GPa, so the goal is 100,000 MPa)
      • Molded Nylon - 75 MPa
      • Plain carbon steel - 450 MPa
      • 4130 Cromoly steel - 1110 MPa
      • Dupont Kevlar 49

  • Oh, wonderous progress! (Score:5, Funny)

    by rocjoe71 ( 545053 ) on Friday August 19, 2005 @05:14AM (#13353960) Homepage
    It strongly absorbs microwaves

    Super, I envision the day where I can replace my tin-foil hat with a nanotube beret.

  • Wow..... (Score:3, Funny)

    by mormop ( 415983 ) on Friday August 19, 2005 @05:43AM (#13354024)

    and outperforms even our best bulk materials (such as Mylar and Kevlar) at strength normalized to weight. It strongly absorbs microwaves for localized heating

    Should be interesting to see the day when a drug dealer overrides the safety interlock on his microwave and points it at nanotube body armour wearing DEA officials during a bust.

    Should bring a new meaning to the phrase "hot tits"

    • Don't you forget, human body is also conductive, and microwaves heat it up rather well as it is, though wrapping would make you crispy [slashdot.org].
  • It strongly absorbs microwaves for localized heating (leading to applications ... in windshield warming)

    Yeah, I'm going to have a microwave generator going in my car, aiming the the windshield, just to warm it up. That's got to be safe right?

    Just a shame we can't do something slightly safer, like send a small electric currents through tiny wires, or blow hot air at it.

    But oh no... we have to shoot microwaves through our cars instead.

  • Space elevator time... (Score:5, Funny)

    by Morky ( 577776 ) on Friday August 19, 2005 @05:57AM (#13354054)
    Just keep it out of my neighborhood, please:

    http://groups.yahoo.com/group/stoptheelevator/ [yahoo.com]

  • Why they are weaker (Score:5, Informative)

    by convex_mirror ( 905839 ) on Friday August 19, 2005 @06:02AM (#13354062)
    The reason why nanotube composites don't end up being nearly as strong as nanotubes is that nanotubes are very slippery inside of a composite, so once force is applied, it doesn't transfer through the interface and the ultimate tensile strength is primarily determined by the composite.

    In this case, when they are weaving fibers together, the weakness in tensile strength will come from the interface between linked nanotubes which will have a tensile strength many orders of magnitude than that of an individual tube.

  • waiting... (Score:2, Insightful)

    by distantbody ( 852269 )
    "...and is expected to be used in commercial applications very soon..."
    ,
    Hmmm, hasn't that been the case for the past decade? That's what my inner cynic says, anyway. Just like the fuel cell revolution, not to mention the nuclear fusion revolution.

    there should be a revolution any day now... :(

  • Also.. (Score:2, Interesting)

    by wpiman ( 739077 ) *
    on that page was the urine powered battery.... Now that could useful. Drink a few beers and power your laptop.
  • Finally, a pair of underpants that won't wear out!

  • Stealth material? (Score:5, Interesting)

    by mwilliamson ( 672411 ) on Friday August 19, 2005 @06:36AM (#13354128) Homepage Journal
    If it strongly absorbs microwaves, I wonder about its potential as a radar-absorbing material for stealth military aircraft, leadfoot driver's cars, etc.

  • the key ingredient to this all: (Score:5, Funny)

    by DohnJoe ( 900898 ) on Friday August 19, 2005 @06:50AM (#13354146)
    by teasing nanotubes away from one side of a forest and attaching them to a strip of sticky tape

    again proof that duct tape can make anything work!
    Soon we will have duct tape made out of this nanotubes, after that, who knows or even dares to dream!!!
  • The Dallas Morning News (19-AUG) has a story on this. Registration is usually required, so text follows . . .

    Article URL: http://www.dallasnews.com/sharedcontent/dws/dn/lat estnews/stories/081905dnmetnanosheet.1c9439ac.html [dallasnews.com]
    Video URL: http://www.dallasnews.com/s/dws/spe/2005/nanotech/ [dallasnews.com]

    ---------

    LITTLE CREATION, BIG STEP

    UTD team's chemical ribbons could assist many high-tech dreams

    09:01 PM CDT on Thursday, August 18, 2005

    By SUE GOETINCK AMBROSE / The Dallas Morning News

    Scientists from

  • Specific strength (Score:3, Informative)

    by nuggz ( 69912 ) on Friday August 19, 2005 @07:45AM (#13354311) Homepage
    WTF is Strength normalized to weight?
    Specific strength is the term they are looking for, second it is normalized to mass, not weight.

    Suggest to me someone with little science/engineering background "wrote" the article, and just listed off the interesting stuff they 'heard about nanotubes'
    • WTF is Strength normalized to weight?
      Specific strength is the term they are looking for, second it is normalized to mass, not weight.

      Maybe they were trying to target a nonscientific audience. To Joe sixpack Specific strength means nothing, and weight is the same thing as mass(assuming Joe has a vaguely idea about what the word mass means)

      • Joe Sixpack (Score:2, Insightful)

        by nuggz ( 69912 )
        I wouldn't rely on a tabloid science article for the current status of technology.

        I do find it odd that you'd expect someone who doesn't know that weight and mass are different would know what 'normalized' means.

        Depending on the target audience I would have said either
        High specific strength or
        Good strength/weight ratio

        I'll stand by my initial statement that this is a junk article.
    • Strength normalized to weight is exactly what its name would imply. "Specific strength," not being a very common term, would have needed to be said as, "Specific strength, which is strength normalized to weight..." I'm personally glad they saved the reader the time.

  • Sounds great... (Score:3, Interesting)

    by gadgetman ( 4992 ) on Friday August 19, 2005 @07:48AM (#13354323) Homepage
    If this stuff is so resilient, NASA should really research a coating of it over the Shuttle tank foam that keeps falling off.
  • ... that Nanotubes are to materials as XML is to software?

  • Sheet tensile strength (Score:5, Informative)

    by The Evil Dwarf from ( 17232 ) * on Friday August 19, 2005 @07:56AM (#13354348)
    According to the Science [sciencemag.org] article [sciencemag.org](subscription required) abstract [sciencemag.org] a stack of 18 sheets had a strength of 465MPa/(g/cm^3) (high strength steel listed as 125 MPa/(g/cm^3)).

    They also built an OLED of 500 cd/m^2 with a onset voltage of 2.4V.
  • I'm no chemist or engineer, I don't know what potential carbon nanotubes have or don't have but whenever I read an article that seems to promise everything, I figure it is about 95% hyperbole and wishful thinking.

    I'm pleased to see that these things are getting ready to move into a sort of production phase but really wonder what applications they will find themseves in? If some conventional prduction method produces a product of acceptable quality, I don't see carbon nanotubes making much of a dent in thes

    • Re:But will it slice bread? (Score:5, Informative)

      by fearofcarpet ( 654438 ) on Friday August 19, 2005 @10:01AM (#13355217)

      I'm no chemist or engineer, I don't know what potential carbon nanotubes have or don't have but whenever I read an article that seems to promise everything, I figure it is about 95% hyperbole and wishful thinking.

      I am a chemist, I work in the "nanotechnology" field, and I have spent time in Engineering/MS labs making OLEDs, PV cells, and other thin film devices. Many of "us" consider nanotubes to be the only viable "nanotechnology" at the moment because of the fact that they can be used by spraying thin layers, making entangled sheets, or other easy-to-commercialize methods of preparation. As for the hybperbole, I think the fact that you're reading an article on MSNBC should give you a clue : ) If you read the Science article they make essentially none of the claims present in the MSNBC article. In fact all they really claim is a new method for preparing NT sheets that is way better than the current methods used for preparing NT 'paper' (it really looks and feels like paper).

      Yes, nanotubes are cool. Yes, they conduct electricity. Yes, they emit white light in an OLED configuration. I'm not 100% sure where they're getting the artificial muscle thing, but from what I've read (from peer reviewed journals) don't hold your breath - but I'm no expert there. What generally happens here is the inventors like to hype their discovery up (in this case a method for preparing better NT sheets) as much as possible, but in "science speak". That is, this "may be used for ___" or "has the potential for ___" and then they rattle off stuff NTs can be used for which gets all mixed up in the in article. In this case NT sheets are nothing new and most of what they're claiming has been done before (IBM even got light out of a single NT, far more impressive if you ask me), but they're doing it better with higher quality NT sheets. When it was discovered that poly(aniline) had great mechanical properties as well as interesting "chemical switching" and conductive properties there were people that were sure it was going to be used in planes, clothes, computers... You name it. Too bad it is deliquescent - D'Oh. I can't remember whether this happened before or after the discovery that poly(acetylene) had a high tensile strength and people were claiming space elevators, lightweight electric motors, etc etc. Too bad it catches fire in air in its conductive form - D'Oh D'Oh.

      At the end of the day this is another step towards some real nanotechnology applications, but you're reading about it because the editors at Science decided it was worth publishing. Only in the Science article they include all the references to the past work that made it possible :) Oh, and the microwave thing is neat because the NTs will spark like crazy in your microwave oven. So will graphite, which you can try at home if you like... If you don't know NTs are essentially "rolled up" graphite sheets, so they share a lot of common properties.

      Here is the abstract:

      Individual carbon nanotubes are like minute bits of string, and many trillions of these invisible strings must be assembled to make useful macroscopic articles. We demonstrated such assembly at rates above 7 meters per minute by cooperatively rotating carbon nanotubes in vertically oriented nanotube arrays (forests) and made 5-centimeter-wide, meter-long transparent sheets. These self-supporting nanotube sheets are initially formed as a highly anisotropic electronically conducting aerogel that can be densified into strong sheets that are as thin as 50 nanometers. The measured gravimetric strength of orthogonally oriented sheet arrays exceeds that of sheets of high-strength steel. These nanotube sheets have been used in laboratory demonstrations for the microwave bonding of plastics and for making transparent, highly elastomeric electrodes; planar sources of polarized broad-band radiation; conducting appliqués; and flexible organic light-emitting diodes.

      So what they did was create sheets

      • Thank you for your reply and all of the great information that it contained. Someone Please mod this up!!!!

        Can I ask you a layman's question? What are the first products that consumers are likely to see made out of this technology? When are we likely to see them in production?

        Once again, thank you very much for your reply. I really appreciate it.

  • Uses! (Score:3, Insightful)

    by LWATCDR ( 28044 ) on Friday August 19, 2005 @09:02AM (#13354765) Homepage Journal
    Okay it looks like this could be used anywhere that you currently use Carbon Fiber. I can hardly wait.
    Super strong light weight helmets.
    Homebuilt aircraft.
    Bicycles.
    It just goes on and on.
    The fact it is transparent, conductive, and absorbs microwaves makes me think that we will see a lot of it uses for RAM coatings on ships and aircraft.
    I can also see it being used for anti rf wall paper and and windows in secure buildings.
    All in all very cool.

  • Need For Speed (Score:3, Insightful)

    by FridayBob ( 619244 ) on Friday August 19, 2005 @09:07AM (#13354801)
    From the article:

    ... With this method they can produce nanotube sheets at up to seven meters per minute, ...

    Assuming the product eventually exceeds 100 GPa, at this rate it would take over 27 years to produce a 100,000 km ribbon in one piece. Since that timescale would be impractical, I figure they should aim for at least a meter per second, which would allow them to do it in a little over three years instead. On the other hand, they could also, for example, set up 30 production lines to work at the current speed, run them all for about a year and then glue the segments together using the extra length for overlap. However, that would add extra volume and make it heavier (remember that the first ribbon has to go up on a rocket).
  • We know buckyballs tear fish brains apart. What does this stuff do? Have biological experiments been run yet?

    LS

Slashdot Top Deals

Make sure your code does nothing gracefully.

Close