"Infrared Curtain" Brings Touchscreen Technology To Cheap Cars 123
An anonymous reader writes with news about an affordable way to integrate touch screen technology in any car. "Although touchscreen controls are appearing in the dashboards of an increasing number of vehicles, they're still not something that one generally associates with economy cars. That may be about to change, however, as Continental has announced an "infrared curtain" system that could allow for inexpensive multi-touch functionality in any automobile. The infrared curtain consists of a square frame with a series of LEDs along two adjacent sides, and a series of photodiodes along the other two. Each LED emits a beam of infrared light, which is picked up and converted into an electrical signal by the photodiode located in the corresponding spot on the opposite side of the frame."
Old Tech (Score:5, Informative)
Re: (Score:1)
Definitely not new. I remember some touch screens in the 1980s which used IR detectors and emitters in an array mounted in front of a monitor.
Re: (Score:1)
Yup. My HP 16500A logic analyzer from the '80s has that kind of touchscreen panel.
Re: Old Tech (Score:2)
Double yup. I had boat-anchor HP terminal with one of those (and a built-in thermal printer).
Old Tech (Score:1)
This is not exactly new technology.
No, no it's not. I remember an old Byte magazine from the late 70's that had an article discussing how to make a touch screen this very same way.
Re:Old Tech (Score:5, Informative)
Go back to the HP 150 [wikipedia.org] from 1983.
That PC had a touch screen using the same tech, and it was a bad idea at that time, the idea of touch screens in some solutions haven't become better. It's OK to have a touch screen on a phone or small handheld device, but in a vehicle in motion it's a traffic hazard. On a PC with a mouse and keyboard it's just stupid.
Re: (Score:2)
This is not exactly new technology.
Its also not exactly much cheaper than capacitive touch screens, which are pretty much dirt cheap. The 'cheap touch screen' problem has already been solved.
And if I want really low resolution touch panel, I can still use buttons.
The DVIS system - 1980's tech at NASA (Score:3)
used the infrared curtain concept. It was basically a badass intercom, or a closed loop HAM radio that used fiber optics instead of radio depending on how you want to look at it.
Not super awesome capacitive touchscreen tech - but it's something that will work for gloved or calloused fingers - something touch screens have a problem with. (you have no idea how many bad "drops" I've made on video games because the screen doesn't work on my callouses)
Re: (Score:2)
In fact, I believe this is one of the oldest touchscreen technologies in existence...
Re: (Score:1)
Good golly! We were building airline cockpit equipment using this technology back around 1982.
Re: (Score:2)
PLATO Plasma panel terminals (1973 or so) had the same thing. It was only 16x16, and wasn't "multi-touch", but worked well.
So, basically 40 year old tech.
Re: (Score:2)
It's still commonly used in digital whiteboards, e.g. in classrooms. There are even companies that retrofit IR touch frames on non-interactive displays. It's finally dying in that market because Microsoft now requires full multitouch capability for modern Windows compatibility.
Re: (Score:2)
Me and another tech were testing out the capabilities using MS paint software, and it would recognize each finger on both hands. Once we added an eleventh simultaneous finger to the mix, it wouldn't recognize it. I think it was more
Re: (Score:2)
That's exactly what I tried to say: "or more accurately, two corners of a rectangle, with no way of knowing which two."
Re: (Score:2)
This is So old... (Score:5, Informative)
This is so old, I'll bet the patents have expired. I'm sure I saw it close to 20 years ago. The "Anonymous" that suggested it was probably the marketing droid that was responsible for the press release (follow the link) that got some lazy editor to post it on Gizmag.
Re: (Score:2)
Seriously, I'm pretty sure the first touch screen I ever used back in the early '90s used basically the same method. You didn't have to actually touch the screen, since it was a CRT and was usually curved where the sensor plane was flat.
Re:This is So old... (Score:5, Insightful)
Re: (Score:2)
Seconded. We had them at college. With those old curved monitors the beams were about 17 yards from the screen in the corners, which meant it was easy to hit them by accident, plus it exaggerated parallax errors. Not that the resolution was so brilliant anyway...
Re: (Score:2)
Yes, Carroll Touch Technology who later renamed themselves to ELO.
Re: This is So old... (Score:1)
I love Electric Light Orchestra. One of my favorite bands.
Re: (Score:2)
I was at Carroll Touch back in the 90s. It did not support multi-touch.
I think it is news because nobody, until now, came up with the obvious idea is to add a IR touch panel over the display in the car.....DUH!
Re: (Score:2)
Whoever thought of that name was probably praised by management for their mr blue sky thinking.
Re: (Score:2)
I remember seeing this technology used on a screen at a zoo or maybe marine world, something like that, when I was a child. I'm pretty sure it's older than 20 years.
VERY old technology (Score:1)
This was done back in the 80's on a home security/automation system.
http://www.reddit.com/r/pics/c... [reddit.com]
Make that 1972 (Score:4, Informative)
The PLATO IV terminals [wikipedia.org] from 1972 had such touchscreens as well. Ancient tech indeed.
Re: (Score:2)
Re: (Score:2)
I was just searching the comments prior to posting that one myself. I remember using that system at Purdue back in the Summer of '76. I was amazed enough at the tech that the name, Plato, stuck with me :-)
Multi touch while driving? (Score:5, Insightful)
I'm sorry, but pinching and zooming on a multi-touch display seems inherently incompatible with operating a motor vehicle. For a car, steering wheel mounted buttons, easily accessible knobs, and maybe voice control.
Mucking about with a touch screen? Not so much.
Do the people who make cars not actually keep tabs on things like traffic laws and common sense? Or are they just all trying to monetize your dashboard, and don't care?
I'm not sure this would legally comply with most hands free laws.
Re: (Score:1)
I'm sure the manual will indicate that the touchscreen should only be used while parked. But given that I've seen people disappear to reach into the glove box for a CD and fiddle with removing the previous, and change the CD while in heavy traffic, I can't see this being any less safe than we currently allow on the roads. In fact, becaus
Re:Multi touch while driving? (Score:4, Funny)
Brother, in my day, I could swap out an 8-track with a beer in one hand and a joint in the other while driving a stick shift on the Eisenhower Expressway at 8:45am. On mexican quaaludes.
Don't look at me like that. I was the designated driver. You should have seen the guys in the back seat.
Re: (Score:2)
Re: (Score:3)
Maybe they do. But what they need is an appropriate one.
It's not stupid because they're used in different situations.
Re: (Score:3)
Touchscreens are terrible in cars because you have to look at the screen to see where to touch. Knobs, levers, switches, and buttons can be operated by touch while keeping visual focus on the road. It might take a couple weeks to learn a new vehicle but you can learn to operate it by feel.
Re: Multi touch while driving? (Score:2)
Re: (Score:2)
you're not supposed to be fiddling with the touchscreen on tesla while driving...
Re: (Score:2)
Fact is, the tesla controls are LESS bothersome to me than the old buttons.
Re: (Score:2)
Right. You do NOT fiddle with it while driving. However, the same can be said of regular car buttons.
No, it cannot. Regular buttons stay in the same place all the time, and you can feel for them while not looking at them. You can't feel for touch controls.
Fact is, the tesla controls are LESS bothersome to me than the old buttons.
Fact is, that's only true if you take your eyes off the road, and keep them that way until you're done.
Re: (Score:2)
There is so much screen real-estate, Tesla has eliminated most of the painful nested menus you find on other cars with smaller screens.
That says it all. The big screen is NOT a distraction since you avoid multiple dialogs that you have to learn with the small screens. Instead, tesla has most controls on the wheel (pretty normal), and then there is a top bar on the screen in which you can move to a couple of different mappings. Issue solved.
The fact is, that all cars require some amount of learning where buttons are. With Tesla, they are located in 2 easy spots: the wheel and a very large screen.
Re: (Score:2)
Since when does having more money than sense make somebody an authority on anything?
Re: (Score:2)
This.
After posting my post (of course, I got to brag before reading your opinions), I started reading how valued "multitouch" seems to be among /. readers.
It's, granted, a game-changer that enabled buttonless phones, for better and for worse. But in a car, you want to avoid as hard as you can all kinds of interfaces that require your visual attention. My body knows where most useful buttons in my car are (and in the strange event I need to, say, switch the airflow setting, I know I can do it while at a red
Re: (Score:1)
Re: (Score:2)
Re: (Score:2)
What's wrong with capacitive touch? (Score:5, Insightful)
If THAT is "too expensive", maybe raise the price of the car by ten bucks or so?
Re: (Score:2)
Exactly. A lot of facepalm on this.
I don't want any touch (Score:5, Insightful)
Keep touchscreens away from cars. Back in the good old days I could reach down and adjust the air temperature with a slider and fan speed with a knob without taking my eyes off the road. Now I have to navigate menus and read text for the same task.
Re: (Score:2)
Actually I agree. I was so busy fixing a problem that I missed that we're looking for a solution that actually has no underlying problem.
You're right. I do not WANT touch screens. I want buttons. I want to be able to reach down and count buttons so I could tell without looking which one would turn the AC on or off, which one would adjust temperature or fan.
Perfect example of looking for a fix for a solution that ignores the actual problem.
We Don't Need... (Score:5, Insightful)
Re: (Score:2)
Re: (Score:2)
Re: (Score:1)
Re: (Score:2)
No thanks (Score:4, Insightful)
I'll stick with actual buttons, thank you very much.
Touchscreens Suck for Situation Awareness! (Score:5, Insightful)
Why the push to have touchscreens in the car in the first place? Use of a touchscreen demands that the driver take their eyes off the road, focus on the touchscreen, touch it in the right spot, and then they can return their attention to the road (hopefully without seeing a gaggle of kids, puppies, nuns, or whatever bouncing off the hood of their car).
Why don't we just put all of the car controls in an app on a smartphone and be done with it, making sure that the driver never focuses on the road?
Tactile buttons and knobs are much safer. You can feel for them, identify them by touch, and manipulate them without taking your attention off the road. Good control designs [berkeley.edu] are unambiguous and easy to find and manipulate.
Re:Touchscreens Suck for Situation Awareness! (Score:5, Insightful)
This. If I had my way, I would ban all touchscreen control systems in cars. They're fundamentally unsafe by design as long as there are humans behind the wheel. If it is unsafe for me to look down at my cell phone and read a text message, it's a hundred times as unsafe for me to look down at my radio, see what channel it is on, scroll through a list of channels, and choose the right one. It is almost as though someone at every auto company simultaneously thought to themselves, "We've been improving the road safety of our cars for three or four decades, and the lower accident rate has meant fewer replacement vehicles. What can we do to cause more car wrecks?"
Re: (Score:2)
Let me clarify what I meant by that. Touchscreens built into the console of the car should be banned. Stand-alone GPS receivers are different, because you mount them in the corner of your windshield, so your peripheral vision is still on the road while you're looking at them.
In-dash GPS systems should be banned, both because they seem to universally suck and because using them to figure out where to turn is inherently less safe than using the ones mounted to your window, because you have to look down so
Re: (Score:2)
Nail, head, hit. My vehicle (which was bought with a non touch screen) has all the basic controls available by buttons or dials. No need to take the eyes of the road to look at the touch screen, punch a tab on it to select the A/C or heat, tap and drag a slider up and down, then hit another tab to control fan speed. Of course, with how UIs are, there will be lag where you can't tell the device noticed your tap or not. At least with a dial, you know that it registered it due to tactile clicks.
My biggest
Re: (Score:2)
Aside from complete marketing "cool" factor, my guess would be that it a cheap touchscreen is (now) cheaper than all of discrete control knobs. You only need one cutout in the center console, and you don't need all the extra wires and switches and things. Also, it is easier to configure different virtual controls on the one touchscreen system for all the different vehicles, trim lines and vehicle configurations you make. The touchscreen may even be a little more reliable than the physical controls, assu
Touch screens in vechicles = bad idea (Score:4, Insightful)
Shifters, signals, lights, wipers, gas, break, hazards, fogs, steering..etc are designed to be manipulated by tactile feedback alone. Likewise my audio system was selected for its ability to be fully controllable via tactile feedback.
Driving is not a "game" .. touch interfaces have no place in a vehicle.
Re: (Score:2)
Context-sensitive menus (so you have to look) is a fundamentally bad idea in this situation. Unfortunately, chasing fads over functionality plagues nearly all industries, not just automotive.
Re:Touch screens in vechicles = REAL bad idea (Score:2)
Amen: You want controls you identify by touch to do common things so your eyes do NOT leave the road.
Re: (Score:2)
I recently test drove a Chevy Volt. I was very excited about this car and its technology. But then I tried to turn on the climate control. Way too much touch screen interaction is required to do anything. If not for the touch screen, I might have bought the car, but now I won't even consider it.
Re: (Score:2)
I recently test drove a Chevy Volt. I was very excited about this car and its technology. But then I tried to turn on the climate control. Way too much touch screen interaction is required to do anything. If not for the touch screen, I might have bought the car, but now I won't even consider it.
I recently bought a Chevy Volt, and agree 100%. The climate control stuff is nearly all on the touchscreen. Instead of turning a knob or moving a lever, I have to hit a button to bring up the climate control screen, then find and touch the desired spot on the screen. The same goes for radio and other miscellaneous controls - I have to hit a button, then muck around with different points on the screen.
To make things even worse, the "physical" buttons on the console aren't actually buttons, but touch-sensi
Re: (Score:2)
I recently test drove a Chevy Volt. I was very excited about this car and its technology. But then I tried to turn on the climate control. Way too much touch screen interaction is required to do anything. If not for the touch screen, I might have bought the car, but now I won't even consider it.
I had the exact same reaction to the 2009 Prius that I test drove a couple of years ago. If I have to look down to find a button to change the fan speed on the A/C, Toyota has failed on it's UX.
What is the resolution? (Score:2)
Re: (Score:2)
The oldest tech like this had straight beams and receptors on the other side and was totally digital, but now they can read reflections, so in theory they can have resolution higher than the resolution of the scanning grid.
Stop this! (Score:2, Redundant)
What's the point? (Score:2)
Bad idea... (Score:2)
Who wants to bet this is actually a case of some manufacturer having old inventory or excess capacity they need to justify and made some kind of deal to offload these terrible devices by using them in cheap cars.
Next, in 2018 or so, mechanical controls will be the "in" thing only found on nicer cars...
HP110 and HP150 in the 1980s? (Score:4, Informative)
This sounds exactly like the tech used by Hewlett Packard in the mid-1980s (here in Mexico, maybe it was known earlier elsewhere) for their HP110 and HP150 lines. The HP110 had (25x80? Probably...) holes on the screen edge, with a LED and a receiver at the opposite ends. IIRC, for the HP150 the "magic" was that the screen borders were now smooth, because the LEDs were higher power, and infrared instead of visible-spectrum.
I never used those machines; I remember seeing them and drooling at the finger-detecting magic :-) But thirty years later, it's hardly a new technological development.
Not multi-touch capable if it's like one of these (Score:2)
Amazon Kindle and Nook Simple Touch (Score:3)
The original Amazon Kindle Touch and the Nook Simple Touch have used this technology for years. It's a very, very old technology. There's nothing really special about this except that it's being applied to automobiles.
Re: (Score:2)
The original Amazon Kindle Touch and the Nook Simple Touch have used this technology for years.
Who told you that? The Nook Simple Touch has a two-point capacitive multitouch display. I've got one right here.
Re: (Score:2)
The Nook Simple Touch uses zForce Infrared, which is pretty much which this describes. Reviews [cnet.com] at the time mentioned it, which links to here [cnet.com] to describe it. I have NST too and it works fairly well, most of the time.
Re: (Score:2)
Who told you that? The Nook Simple Touch has a two-point capacitive multitouch display. I've got one right here.
Sorry, you're not correct. See the other poster's response.
Old technolgy (Score:1)
How about no thanks (Score:2)
The last thing I want is touch screens in my car. I want tactile controls. What the fuck is so terrible about a few knobs and sliders? At least I don't have to look at them while I'm driving.
Re: (Score:2)
Re: (Score:2)
Most people are too stupid to use them. There is a reason that US market cars are dumbed down compared to Japan Market and Europe Market.
controls in cheaper cars are better (Score:2)
I've recently been moving around quite a bit, and have rented a few cars. As I've been putting rental orders in at short notice I've had the opportunity to drive a few cars that are usually out of my budget range, higher end Mazda, Ford, BMW and Mercedes. I can say without a doubt that the touchscreen controls in all of these cars are terrible, and actually ruin the experience of driving them. If you are unfamiliar with it then forget making any kind of adjustment while driving.
The car I had in the US, a Do
Re: (Score:2)
Re: (Score:2)
Yes indeed, screen controls for the merc. Not much better than a touchscreen in my opinion. The problem is not so much the screen, but that you have to navigate through multiple levels of menu to get anywhere.
The most frustrating issue I had with all these different cars was getting a manual BMW into reverse. No indication of how to do it on the gearstick, so I had to get the manual out. It turned out it was just so stiff that you couldn't tell you were going in the right direction, I had to use both hands
Re: (Score:2)
Re: (Score:2)
Yes, that does sum it up. Lovely cars to drive when you can just let loose. But day to day, aggravating.
I've seen the same issue with the satnav in my Aunt's Land Rover - we could not switch it off, 5 of us had a turn.
How about no. (Score:2)
Why? (Score:1)
Don't fix it if it isn't broken!
Why? (Score:2)
Standard resistive Touchscreen tech is dirt freaking cheap. I can get 7" resistive types for $9.00 each all day long at single quantities. If I was a car maker I could get them at less than $1.00 each in 1000+ quantities.
Honestly this IR system is a rehash of really old tech that is just not needed.
What is needed is the important buttons existing as REAL HARD BUTTONS. the systems that are 100% touch are complete crap. Yes I do want my hard buttons back on android, the on screen home button is really 10
Re: (Score:2)
Standard resistive Touchscreen tech is dirt freaking cheap. I can get 7" resistive types for $9.00 each all day long at single quantities. If I was a car maker I could get them at less than $1.00 each in 1000+ quantities.
Honestly this IR system is a rehash of really old tech that is just not needed.
What is needed is the important buttons existing as REAL HARD BUTTONS. the systems that are 100% touch are complete crap. Yes I do want my hard buttons back on android, the on screen home button is really 100% crap.
Resistive touchscreens also don't care if the user is wearing gloves, which would be a plus for automotive use. But, they are not as durable as capacitive, which I would argue is a reason to not use them in a car.
But IR systems are also not a good choice because the sensors can be swamped by sunlight.
IR systems still find uses in industrial settings because they can be completely sealed, respond to gloved fingers, and have no flexible/moving parts like a resistive screen, but IR is hardly the new, groundbr
Please no! (Score:2)
I'd be willing to pay more money for a car without touchscreens. I want to be able to operate the controls by feel, without taking my eyes off the road. Besides that, any significant electronic system in a car will quickly become outdated. If the technology is that important to the driving experience, I'll get a mount for my cell phone.
Bringing 70s tech... (Score:2)
Re: (Score:1)
Re: (Score:1)