Slashdot is powered by your submissions, so send in your scoop

 



Forgot your password?
typodupeerror
×
Displays Technology

Graphene Based Display Paves Way For Semi-Transparent Electronic Devices 51

hypnosec writes University of Manchester and University of Sheffield researchers have managed to produce the first graphene-based LED displays, which could pave the way for efficient, flexible and semi-transparent electronic devices. The research, published in scientific journal Nature Materials [abstract; article is paywalled], shows how graphene displays and related 2D materials could be utilised to create light emitting devices for the next-generation of mobile phones, tablets and televisions to make them incredibly thin and durable. The LED device was constructed by combining different 2D crystals and emits light from across its whole surface. Being so thin, at only 10-40 atoms thick, these new components could form the basis for the first generation of semi-transparent smart devices.
This discussion has been archived. No new comments can be posted.

Graphene Based Display Paves Way For Semi-Transparent Electronic Devices

Comments Filter:
  • Comment removed based on user account deletion
    • by popo ( 107611 )

      For that you don't need a transparent device. You just need a transparent display.

      Those are two different things actually.

    • by TWX ( 665546 )
      Heads' up displays in cars have been available on and off since the eighties. They're typically projector-based and use glass or an applique on the glass that reflects only where the projector points.
      • Comment removed based on user account deletion
        • Yes, so it would not be a HUD perhaps, but the screen could be a display. That way it could work during the day as well.

          So... maybe something to let me play Call of Duty Advanced Warfare while I'm driving to work?
          That would be so much better than Candy Crush or just texting... </jk>

    • by Anonymous Coward

      I don't know why all the negative replies to your question. Current car HUDs are far from ideal - they don't work well in daylight, and the resolution is usually poor, limiting the amount of information that can be shown. A high-resolution semi-transparent display, if it was transparent enough to see clearly through, and bright enough to see activated pixels in daylight, could be a big step forward in in-car HUDs. Sounds like there's a long way to go until there are actual products based on this tech though

    • I'm sure they could, but I'd pass on it. Do you have any idea how much that would add to the cost of the windshield? I have a car with a HUD. To avoid ghosting, the part of the windshield that it is projected onto is thinner than the rest. This makes the cost of the windshield itself $1200. Imagine what the cost would be to imbed this.
  • Why? (Score:3, Insightful)

    by richy freeway ( 623503 ) on Tuesday February 03, 2015 @08:54AM (#48968241)

    Why do we want semi transparent smart devices?

    • Re:Why? (Score:4, Informative)

      by OneSmartFellow ( 716217 ) on Tuesday February 03, 2015 @09:02AM (#48968307)
      So you can see the chips and battery inside of it ?

      Good frigging question
    • by Anonymous Coward

      Imagine a bowl of soup that would not only display the amount of calories you ingest with every spoonful, but also prod incessantly about your body weight. Now extend this technology to plates and other diningware, and combine it with forks that hum a joyful morse code rendition of 'O Come All Ye Fatties.

      And hey presto, your nextgen transparent diningware cuts the obesity rate by 10%.

      And surely you've thought about the endless potential of having corporations advertise the latest and greatest diet coke form

    • Re:Why? (Score:4, Interesting)

      by pr0fessor ( 1940368 ) on Tuesday February 03, 2015 @09:19AM (#48968447)

      I don't know about semi-transparent but flexible so that it doesn't break so easily would be nice.

      • by green1 ( 322787 )

        Except whenever a device has any flex to it we hear people complain that it doesn't feel solid enough or premium enough, so people scream for metal frames instead of plastic etc.(Current technology can do plenty of flex from the stand point of avoiding breakage, but people don't want it.)

      • I hear it is pretty flexible already...

    • XZibit

    • Why do we want semi transparent smart devices?

      Take a look at augmented reality. [wikipedia.org]

    • Re:Why? (Score:4, Insightful)

      by Actually, I do RTFA ( 1058596 ) on Tuesday February 03, 2015 @09:54AM (#48968805)

      We don't. Just like we don't want our coffee makers on the web, or our every online move tracked by companies.

      What makes you think consumer demand matters? Build it, and then manufacture the demand.

      • Comment removed based on user account deletion
        • Re:Why? (Score:4, Interesting)

          by Actually, I do RTFA ( 1058596 ) on Tuesday February 03, 2015 @12:02PM (#48970313)

          This morning I woke up and knew that getting coffee would be a chore involving going over to the kitchen, setting everything up, waiting a few minutes

          They make coffee makers that you fill with beans and water the night before, and it will grind the coffee and start the brewing so it is ready at a precise time. I have no objection to a programmable device. I even have no real objection to a LAN controllable device. My objection is to a device that connects to the internet. Because that last leap is just to spy on me.

          Or in other words, I've never been on vacation and been like "must make coffee right now."

          • Comment removed based on user account deletion
            • mine has a timer, but that does mean setting it up the night before...

              There's no way around that, unless you want a robot or something. Because the grounds won't put themselves in the coffee maker. And you can program it to work 5 days a week. Hell, you can even hook a water line up.

          • Because that last leap is just to spy on me.

            Or to allow hackers to brick your coffee maker, so you have to buy a new one.
    • Why do we want semi transparent smart devices?

      Because they are newer than opaque smart devices.

    • Distributed deserializers and switches on Ludicrous-Density displays?

    • by tlhIngan ( 30335 )

      Why do we want semi transparent smart devices?

      Well, we can use them for HUDs so you can display information while still keeping your eyes on the road.

      Integrate them into glasses and you can do a Google Glass style overlays - great for workers who need to access technical documentation and other things while deep inside a complex piece of equipment. Or first responders who can get information when they need it without having to look at equipment (firefighters would love to have a moving map of their location

      • by siddesu ( 698447 )
        You can't keep your eyes 'on the road' if you're looking at semi-transparent display. These are for the self-driving cars.
  • by Crashmarik ( 635988 ) on Tuesday February 03, 2015 @08:58AM (#48968273)

    Change Graphene to OLED and you will be able to use all the old news stories from 10 years ago.

    • by account_deleted ( 4530225 ) on Tuesday February 03, 2015 @09:04AM (#48968331)
      Comment removed based on user account deletion
    • by ArmoredDragon ( 3450605 ) on Tuesday February 03, 2015 @09:39AM (#48968623)

      OLED would work well if it didn't have such a bad half-life (at least if the blue component didn't have a bad half-life) which causes the display to turn yellow as it ages. I haven't heard anybody discuss what the half-life of graphene is though, so it could be just as bad.

      • Well there's the rub. Graphene is in that monumental hype phase where no one really considers the problems with it.

      • by dkf ( 304284 )

        I haven't heard anybody discuss what the half-life of graphene is though, so it could be just as bad.

        They're probably still working that out. It's one thing to know that it's theoretically possible, but another to demonstrate how to actually do it, so the report that it has been done (even if it turns out to not be very useful in the end) is relevant.

      • We still have to find a cheap, commercial way to produce graphene, so until that happens, the mean life of it it's close to zero.

        Seriously, I'm tired of all these promises of graphene going from curing cancer and HIV to building everlasting batteries out of it to transmitting petabytes of information over a carbon-thick wire... Producing just a small amount of this "miracle material" costs a lot, can't be used out of a lab-controlled environment and it's polluting as hell. Until all of that gets reversed
  • by gman003 ( 1693318 ) on Tuesday February 03, 2015 @09:24AM (#48968509)

    Did nobody at DICE test the CSS changes? Because the front page is broken on a 960px-wide window now, and it wasn't yesterday. Since that's a window pinned to half of a 1080p screen, and /. doesn't come close to actually needing a full 1920px, I'm sure there's a lot of people browsing the same way, and I'm sure a lot of them won't be browsing back if you keep fucking basic shit up like this.

    • A simple browser window resizing seems to give me 1192 pixels wide as the minimum required for this page.

    • Addendum: this is no longer the case on the front page, but page 2 is now broken in the same way. It seems to be caused by the image on "Listnr Wants to be 'Your Listening Assistant' (Video)" [slashdot.org].

      I do not recall having problems with video posts before, so I still suspect some recent CSS changes are breaking things that were once working. Was the lesson not learned after Beta? Don't break things that currently work.

  • Wake me when a low-power display can be read in full noon desert sunlight.

  • A synonymous phrase for Semi-Transparent could be Low-Contrast. Or Migraine-Amplifier.
  • This demonstrates the use of graphene in a band gap [wikipedia.org] structure. Diodes and transistors work because of band gaps, which is achieved in silicon by doping into N type and P type regions. There is no easy way to do the equivalent in graphene, so building active components is hard.

    They created a structure with band gaps by layering multiple materials including graphene [nature.com].

    We describe light-emitting diodes (LEDs) made by stacking metallic graphene, insulating hexagonal boron nitride and various semiconducting mono

Genius is ten percent inspiration and fifty percent capital gains.

Working...