OpenWRT One Released: First Router Designed Specifically For OpenWrt (sfconservancy.org) 15
Friday the Software Freedom Conservancy announced the production release of the new OpenWrt One network router — designed specifically for running the Linux-based router OS OpenWrt (a member project of the SFC). "This is the first wireless Internet router designed and built with your software freedom and right to repair in mind.
"The OpenWrt One will never be locked down and is forever unbrickable." This device services your needs as its owner and user. Everyone deserves control of their computing. The OpenWrt One takes a great first step toward bringing software rights to your home: you can control your own network with the software of your choice, and ensure your right to change, modify, and repair it as you like.
The OpenWrt One demonstrates what's possible when hardware designers and manufacturers prioritize your software right to repair; OpenWrt One exuberantly follows these requirements of the copyleft licenses of Linux and other GPL'd programs. This device provides the fully copyleft-compliant source code release from the start. Device owners have all the rights as intended on Day 1; device owners are encouraged to take full advantage of these rights to improve and repair the software on their OpenWrt One. Priced at US$89 for a complete OpenWrt One with case (or US$68.42 for a caseless One's logic board), it's ready for a wide variety of use cases...
This new product has completed full FCC compliance tests; it's confirmed that OpenWrt met all of the FCC compliance requirements. Industry "conventional wisdom" often argues that FCC requirements somehow conflict with the software right to repair. SFC has long argued that's pure FUD. We at SFC and OpenWrt have now proved copyleft compliance, the software right to repair, and FCC requirements are all attainable in one product!
You can order an OpenWrt One now! Since today is the traditional day in the USA when folks buy gifts for love ones, we urge you to invest in a wireless router that can last! We do expect that for orders placed today, sellers will deliver by December 22 in most countries... Regardless of where you buy from, for every purchase of a new OpenWrt One, a US$10 donation will go to the OpenWrt earmarked fund at Software Freedom Conservancy. Your purchase not only improves your software right to repair, but also helps OpenWrt and SFC continue to improve the important software and software freedom on which we all rely!
LWN.net points out that OpenWrt has also "served as the base on which a lot of network-oriented development (including the bufferbloat-reduction work) has been done." The OpenWrt One was designed to be a functional network router that would serve as a useful tool for the development of OpenWrt itself. To that end, the hope was to create a device that was entirely supported by upstream free software, and which was as unbrickable as it could be... The OpenWrt One comes with a two-core Arm Cortex-A53 processor, 1GB of RAM, and 256MB of NAND flash memory. There is also a separate, read-only 16MB NOR flash array in the device. Normally, the OpenWrt One will boot and run from the NAND flash, but there is a small switch in the back that will cause it to boot from the NOR instead. This is a bricking-resistance feature; should a software load break the device, it can be recovered by booting from NOR and flashing a new image into the NAND array. ..
After booting into the new image, the One behaved like any other OpenWrt router... What could be more interesting is seeing this router get into the hands of developers and enthusiasts who will use it to make OpenWrt (and other small-system distributions) better.
Long-time Slashdot reader dumfrac writes: The intent to build the device was announced on the OpenWRT forums earlier this year. It is based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset and the board is made by Banana Pi. A poll to select the logo was run in April on the OpenWRT forums, and now the hardware is available for purchase. .
"The OpenWrt One will never be locked down and is forever unbrickable." This device services your needs as its owner and user. Everyone deserves control of their computing. The OpenWrt One takes a great first step toward bringing software rights to your home: you can control your own network with the software of your choice, and ensure your right to change, modify, and repair it as you like.
The OpenWrt One demonstrates what's possible when hardware designers and manufacturers prioritize your software right to repair; OpenWrt One exuberantly follows these requirements of the copyleft licenses of Linux and other GPL'd programs. This device provides the fully copyleft-compliant source code release from the start. Device owners have all the rights as intended on Day 1; device owners are encouraged to take full advantage of these rights to improve and repair the software on their OpenWrt One. Priced at US$89 for a complete OpenWrt One with case (or US$68.42 for a caseless One's logic board), it's ready for a wide variety of use cases...
This new product has completed full FCC compliance tests; it's confirmed that OpenWrt met all of the FCC compliance requirements. Industry "conventional wisdom" often argues that FCC requirements somehow conflict with the software right to repair. SFC has long argued that's pure FUD. We at SFC and OpenWrt have now proved copyleft compliance, the software right to repair, and FCC requirements are all attainable in one product!
You can order an OpenWrt One now! Since today is the traditional day in the USA when folks buy gifts for love ones, we urge you to invest in a wireless router that can last! We do expect that for orders placed today, sellers will deliver by December 22 in most countries... Regardless of where you buy from, for every purchase of a new OpenWrt One, a US$10 donation will go to the OpenWrt earmarked fund at Software Freedom Conservancy. Your purchase not only improves your software right to repair, but also helps OpenWrt and SFC continue to improve the important software and software freedom on which we all rely!
LWN.net points out that OpenWrt has also "served as the base on which a lot of network-oriented development (including the bufferbloat-reduction work) has been done." The OpenWrt One was designed to be a functional network router that would serve as a useful tool for the development of OpenWrt itself. To that end, the hope was to create a device that was entirely supported by upstream free software, and which was as unbrickable as it could be... The OpenWrt One comes with a two-core Arm Cortex-A53 processor, 1GB of RAM, and 256MB of NAND flash memory. There is also a separate, read-only 16MB NOR flash array in the device. Normally, the OpenWrt One will boot and run from the NAND flash, but there is a small switch in the back that will cause it to boot from the NOR instead. This is a bricking-resistance feature; should a software load break the device, it can be recovered by booting from NOR and flashing a new image into the NAND array. ..
After booting into the new image, the One behaved like any other OpenWrt router... What could be more interesting is seeing this router get into the hands of developers and enthusiasts who will use it to make OpenWrt (and other small-system distributions) better.
Long-time Slashdot reader dumfrac writes: The intent to build the device was announced on the OpenWRT forums earlier this year. It is based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset and the board is made by Banana Pi. A poll to select the logo was run in April on the OpenWRT forums, and now the hardware is available for purchase. .
Great summary (Score:4, Informative)
Hey, here's this open source project! Here's a link where you can buy it!
I was about to hit submit on a snarky post about how it doesn't have any hardware source files but I googled before I did. It does: https://one.openwrt.org/hardwa... [openwrt.org]
Some sort of repo might be better than dumping them in a directory on a webserver though.
Re: Great summary (Score:2)
And its official store appears to be Alibaba? They make Amazon look reputable.
MESH and API (Score:3)
while this is terribly nice and all
BUT
It needs a robust Mesh mode
preferably a standard HTTPS API for management
good on them
John Jones
Looks great except where's the USB? (Score:3)
Loads of RAM, plenty of storage if it had a USB. You could mount some remote storage on it, but one of the cool things you can do easily with openwrt is run the transmission daemon on your router to torrent for you. I have a USB stick plugged in to my linksys router and mount it with nfsv4, so nothing else has to be on.
It would also have been nice to see dual 2.5GbE. I know this is sort of meant to be a research device, but if not that then most people would probably benefit more from an integrated GbE switch.
Re: (Score:1)
Re: (Score:2)
When are they gonna get around to adding that email client?
Re: (Score:2)
Loads of RAM, plenty of storage if it had a USB. You could mount some remote storage on it, but one of the cool things you can do easily with openwrt is run the transmission daemon on your router to torrent for you. I have a USB stick plugged in to my linksys router and mount it with nfsv4, so nothing else has to be on.
It would also have been nice to see dual 2.5GbE. I know this is sort of meant to be a research device, but if not that then most people would probably benefit more from an integrated GbE switch.
They have a higher end version with 10GbE, SFP slots, more RAM, and lots of other upgrades - for an appropriately higher price.
https://docs.banana-pi.org/en/... [banana-pi.org] k on OpenWRT Filogic drivers should benefit both.
Re: (Score:2)
It has a USB 2.0 (A) connector and a M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1).
Re: (Score:2)
It has a USB A port.
Re: (Score:2)
You could mount some remote storage on it, but one of the cool things you can do easily with openwrt is run the transmission daemon on your router to torrent for you. I have a USB stick plugged in to my linksys router and mount it with nfsv4, so nothing else has to be on.
I would say people who are doing more than occasional torrenting already have a server or NAS of some sort operating in the home that their client runs on, and have access to a much larger amount of local storage than a thumb drive.
Also don't forget those Mac users who apparently never turn off their computers anyway.
can we get more ports or at least 2 2.5 ports? (Score:2)
can we get more ports or at least 2 2.5 ports?.
as lot's of ISP are starting to offer 1G or higher links.
Re: (Score:2)
Some vendors are starting to do this in lower priced models. Ubiquiti is getting around to it this season, for instance. I'd been relegated to buying cheapie switches because otherwise I was stuck with 1g connections.
Can a user switch firmware (Score:2)