Andrew Cunningham reports via Ars Technica: For around three years now, the team of independent developers behind the Asahi Linux project has worked to support Linux on Apple Silicon Macs, despite Apple's total lack of involvement. Over the years, the project has gone from a "highly unstable experiment" to a "surprisingly functional and usable desktop operating system." Even Linus Torvalds has used it to run Linux on Apple's hardware. The team has been steadily improving its open source, standards-conformant GPU driver for the M1 and M2 since releasing them in December 2022, and today, the team crossed an important symbolic milestone: The Asahi driver's support for the OpenGL and OpenGL ES graphics have officially passed what Apple offers in macOS. The team's latest graphics driver fully conforms with OpenGL version 4.6 and OpenGL ES version 3.2, the most recent version of either API. Apple's support in macOS tops out at OpenGL 4.1, announced in July 2010.

Developer Alyssa Rosenzweig wrote a detailed blog post that announced the new driver, which had to pass "over 100,000 tests" to be deemed officially conformant. The team achieved this milestone despite the fact that Apple's GPUs don't support some features that would have made implementing these APIs more straightforward. "Regrettably, the M1 doesn't map well to any graphics standard newer than OpenGL ES 3.1," writes Rosenzweig. "While Vulkan makes some of these features optional, the missing features are required to layer DirectX and OpenGL on top. No existing solution on M1 gets past the OpenGL 4.1 feature set... Without hardware support, new features need new tricks. Geometry shaders, tessellation, and transform feedback become compute shaders. Cull distance becomes a transformed interpolated value. Clip control becomes a vertex shader epilogue. The list goes on."

Now that the Asahi GPU driver supports the latest OpenGL and OpenGL ES standards -- released in 2017 and 2015, respectively -- the work turns to supporting the low-overhead Vulkan API on Apple's hardware. Vulkan support in macOS is limited to translation layers like MoltenVK, which translates Vulkan API calls to Metal ones that the hardware and OS can understand. [...] Rosenzweig's blog post didn't give any specific updates on Vulkan except to say that the team was "well on the road" to supporting it. In addition to supporting native Linux apps, supporting more graphics APIs in Asahi will allow the operating system to take better advantage of software like Valve's Proton, which already has a few games written for x86-based Windows PCs running on Arm-based Apple hardware.

Last week Microsoft's Visual Studio Code editor suddenly stopped supporting Ubuntu 18.04 LTS.

But now Microsoft "has announced a temporary reprieve for developers who use VS Code to connect to servers, clouds, container, and other devices running on Ubuntu 18.04 LTS," according to the blog OMG Ubuntu: Microsoft [had] pushed out an update to VS Code that bumps its glibc requirement, dropping support for Ubuntu 18.04 LTS (which uses an older version of glibc) in the process. Innocuous though it sounds, that move had a huge impact, leaving thousands of developers who use VS Code unable to connect to/work with devices running Ubuntu 18.04 LTS or other Linux distros using glibc 2.27, including RHEL 7, CentOS 7, and Amazon Linux 2.

— "Screwed" was the term many of those affected used!

Well, good news: Microsoft says it plans to release a 'recovery' update for VS Code soon. This will restore the ability for developers to use the text editor's remote dev tools to connect to/work with machines running Ubuntu 18.04 LTS and other, older Linux distros.

But only for the next 12 months.
"We hope this will provide the needed time for you and your companies to migrate to newer Linux distributions," Microsoft's senior product manager for VS Code posted on GitHub. He added that the software will "show the appropriate dialog and banner that you are connecting to an OS that is not supported by VS Code." (The updated was released on Thursday.)

He also thanked developers for their feedback and "for sharing your passion for VS Code and sharing how it is being used to enable various scenarios."

Thanks to Slashdot reader motang for sharing the article.

IDC, in a press release: A new forecast from IDC shows shipments of artificial intelligence (AI) PCs -- personal computers with specific system-on-a-chip (SoC) capabilities designed to run generative AI tasks locally -- growing from nearly 50 million units in 2024 to more than 167 million in 2027. By the end of the forecast, IDC expects AI PCs will represent nearly 60% of all PC shipments worldwide. [...] Until recently, running an AI task locally on a PC was done on the central processing unit (CPU), the graphics processing unit (GPU), or a combination of the two. However, this can have a negative impact on the PC's performance and battery life because these chips are not optimized to run AI efficiently. PC silicon vendors have now introduced AI-specific silicon to their SoCs called neural processing units (NPUs) that run these tasks more efficiently.

To date, IDC has identified three types of NPU-enabled AI PCs:
1. Hardware-enabled AI PCs include an NPU that offers less than 40 tera operations per second (TOPS) performance and typically enables specific AI features within apps to run locally. Qualcomm, Apple, AMD, and Intel are all shipping chips in this category today.

2. Next-generation AI PCs include an NPU with 40 to 60 TOPS performance and an AI-first operating system (OS) that enables persistent and pervasive AI capabilities in the OS and apps. Qualcomm, AMD, and Intel have all announced future chips for this category, with delivery expected to begin in 2024. Microsoft is expected to roll out major updates (and updated system specifications) to Windows 11 to take advantage of these high-TOPS NPUs.

3. Advanced AI PCs are PCs that offer more than 60 TOPS of NPU performance. While no silicon vendors have announced such products, IDC expects them to appear in the coming years. This IDC forecast does not include advanced AI PCs, but they will be incorporated into future updates. Michael Dell, commenting on X: This is correct and might be underestimating it. AI PCs are coming fast and Dell is ready.

An anonymous reader quotes a report from Tom's Hardware: According to a recent report published by the Aargauer Zeitung (h/t Golem.de), around three million smart toothbrushes have been infected by hackers and enslaved into botnets. The source report says this sizable army of connected dental cleansing tools was used in a DDoS attack on a Swiss company's website. The firm's site collapsed under the strain of the attack, reportedly resulting in the loss of millions of Euros of business. In this particular case, the toothbrush botnet was thought to have been vulnerable due to its Java-based OS. No particular toothbrush brand was mentioned in the source report. Normally, the toothbrushes would have used their connectivity for tracking and improving user oral hygiene habits, but after a malware infection, these toothbrushes were press-ganged into a botnet.

Stefan Zuger from the Swiss branch of the global cybersecurity firm Fortinet provided the publication with a few tips on what people could do to protect their own toothbrushes -- or other connected gadgetry like routers, set-top boxes, surveillance cameras, doorbells, baby monitors, washing machines, and so on. "Every device that is connected to the Internet is a potential target -- or can be misused for an attack," Zuger told the Swiss newspaper. The security expert also explained that every connected device was being continually probed for vulnerabilities by hackers, so there is a real arms race between device software/firmware makers and cyber criminals. Fortinet recently connected an 'unprotected' PC to the internet and found it took only 20 minutes before it became malware-ridden. UPDATE 1/7/24: This attack "didn't actually happen," writes Jason Koebler via 404 Media. "There are no additional details about this apparent attack, and most of the article cites general research by a publicly traded cybersecurity company called Fortinet which has detected malicious, hijacked internet of things devices over the years. A search on Fortinet's website shows no recent published research about hacked smart toothbrushes."

The cybersecurity firm Fortinet said in a statement: "To clarify, the topic of toothbrushes being used for DDoS attacks was presented during an interview as an illustration of a given type of attack, and it is not based on research from Fortinet or FortiGuard Labs. It appears that due to translations the narrative on this topic has been stretched to the point where hypothetical and actual scenarios are blurred. FortiGuard Labs has not observed Mirai or other IoT botnets target toothbrushes or similar embedded devices."

An anonymous reader shares a report: Most people know that Microsoft really wants everyone to move onto Windows 11. But just in case there are some Windows 10 users still unaware of this fact, the company is once again nagging them to upgrade with full-screen, multi-slide popups. The lengthy advertisement for Windows 11 was highlighted by Windows Latest after it installed the optional January update (in preview) on a Windows 10 machine.

The nagging Windows 11 upgrade promo consists of an excruciating number of screens (i.e., more than one): The first informs users that they can switch to Windows 11 for free and that they can still use their PC while the newer OS is set up in the background; another is Microsoft recommending the move and noting that users can revert to Windows 10 within the first ten days of upgrading; the last is for those who decide to stay on Windows 10, with a reminder that Windows 11 remains a free upgrade option. There is another panel that lists some of Windows 11 features, but this only appears for those who select the 'See what's inside' button.

According to a job listing spotted by AFTVNews, Amazon makes it clear that the company plans to ditch Android for its own "VegaOS" operating system. "The new platform is said to rely on React Native and would require new apps to be built," reports 9to5Google. From the report: As spotted by AFTVNews, a job listing from Amazon was looking for a "Fire TV Experience Software Development Engineer." The job listing's description makes it abundantly clear that a key part of the role is focused on the transition from Android to the rumored "VegaOS," because it quite literally says that's what is happening, with Amazon saying that Fire TV is transitioning from "FOS/Android" (Fire OS/Android) to "native/Rust" and even explicitly mentioning React Native. The listing, which has since been removed, provides extremely strong evidence of Amazon's plans, which is probably why it was so quickly removed.

Benj Edwards reports via Ars Technica: In a move that marks the end of an era, New Mexico State University (NMSU) recently announced the impending closure of its Hobbes OS/2 Archive on April 15, 2024. For over three decades, the archive has been a key resource for users of the IBM OS/2 operating system and its successors, which once competed fiercely with Microsoft Windows. In a statement made to The Register, a representative of NMSU wrote, "We have made the difficult decision to no longer host these files on hobbes.nmsu.edu. Although I am unable to go into specifics, we had to evaluate our priorities and had to make the difficult decision to discontinue the service."

Hobbes is hosted by the Department of Information & Communication Technologies at New Mexico State University in Las Cruces, New Mexico. In the official announcement, the site reads, "After many years of service, hobbes.nmsu.edu will be decommissioned and will no longer be available. As of April 15th, 2024, this site will no longer exist." The earliest record we've found of the Hobbes archive online is this 1992 Walnut Creek CD-ROM collection that gathered up the contents of the archive for offline distribution. At around 32 years old, minimum, that makes Hobbes one of the oldest software archives on the Internet, akin to the University of Michigan's archives and ibiblio at UNC.

Fossil Group has decided to call it quits on smartwatches. The company announced Friday that it would leave the smartwatch business and redirect resources to its less-smart goods instead. From a report: The company has been one of the most prolific makers of Wear OS smartwatches over the years, and its absence will leave a large gap in the market. "As the smartwatch landscape has evolved significantly over the past few years, we have made the strategic decision to exit the smartwatch business," Fossil spokesperson Amanda Castelli tells The Verge. "Fossil Group is redirecting resources to support our core strength and the core segments of our business that continue to provide strong growth opportunities for us: designing and distributing exciting traditional watches, jewelry, and leather goods under our own as well as licensed brand names." This means that the Gen 6, which first launched in 2021, will be the last Fossil smartwatch. Castelli says the company will continue to keep existing Wear OS watches updated "for the next few years."

This week the Conversation ran an article titled "Mac at 40: User experience was the innovation that launched a technology revolution ".

But meanwhile, an anonymous reader shared this report from the Register: Two weeks before Apple launched the Macintosh, Sir Clive Sinclair launched his unprecedentedly powerful yet affordable Motorola-powered SOHO computer — starting a line of hardware and software that, remarkably, is still going.

The QL remains a much-misunderstood computer. For its time, it was just as radical as the closely related machine that launched days later. Although it wasn't a smash hit, it wasn't the failure it's often deemed. A multinational licensed Sinclair's hardware, and several big-name companies sold versions of it around the world. The QL also inspired a dozen software-compatible successors, at least one of which is still manufactured today ... and not one but two versions of its unique operating system are still around as open source.

Sinclair Research launched the QL on January 12, 1984, nearly two weeks before Apple Computer launched its new Macintosh computer on the 24th. Both machines had Motorola 68000-family processors, a mere 128 kB of memory, and just a pair of serial ports for I/O. Both launched with powerful bundled applications. Both had brutally cut-down specifications to make them price competitive, and both were big technological gambles on unproven technology, previously only available in vastly more expensive computers.

Sinclair's bet was that multitasking would be the key differentiator. It was the first affordable personal computer to offer this. Today it's clear that Sinclair backed the wrong horse, but four decades ago, its mistake was understandable. Before the Macintosh, it was not at all clear that GUIs were the future... When the QL turned 30, The Reg published a detailed history, but a decade on, we thought it would be more interesting to look at the legacy of this pioneering machine — the many models of QL-compatible machines that appeared after Sinclair Research moved on to other things, and the descendants of its remarkable OS and their continued existence in the 21st century.

"Would you pay $15 a month so Android doesn't track you and send all of that data back to Google?" asks Stuff South Africa: A new Swiss-based privacy company thinks $15 is a fair fee for that peace of mind. "A person's data is the original digital currency," argues Apostrophy, which has created its own operating system, called Apostrophy OS.

It's based on Android — don't panic — but the version that has already been stripped of Google's intrusiveness by another privacy project called GrapheneOS, which used to be known as CopperheadOS. Launched in 2014, it which was briefly known as the Android Hardening project, before being rebranded as GrapheneOS in 2019. Apostrophy OS is "focused on empowering our users, not leveraging them," it says and is "purposely Swiss-based, so we can be champions of data sovereignty".

What it does, they say, is separate the apps from the underlying architecture of the operating system and therefore prevent apps from accessing miscellaneous personal data, especially the all-important location data so beloved of surveillance capitalism... Apostrophy OS has its own app store, but also cleverly allows users to access the Google Play Store. If you think that is defeating the point, Apostrophy argues that those apps can't get to the vitals of your digital life. Apostrophy OS has "partitioned segments prioritising application integrity and personal data privacy".
The service is free for one year with the purchase of the new MC02 phone from Swiss manufacturer Punkt, according to PC Magazine. "The phone costs $749 and is available for preorder now. It will ship at the end of January." Additional features include a built-in VPN called Digital Nomad based on the open-source Wireguard framework to secure your activity against outside snooping, which includes "exit addresses" in the US, Germany, and Japan with the base subscription.

It's "a free and open-source, software-defined storage platform," according to Wikipedia, providing object storage, block storage, and file storage "built on a common distributed cluster foundation". The charter advisory board for Ceph included people from Canonical, CERN, Cisco, Fujitsu, Intel, Red Hat, SanDisk, and SUSE.

And Nite_Hawk (Slashdot reader #1,304) is one of its core engineers — a former Red Hat principal software engineer named Mark Nelson. (He's now leading R&D for a small cloud systems company called Clyso that provides Ceph consulting.) And he's returned to Slashdot to share a blog post describing "a journey to 1 TiB/s". This gnarly tale-from-Production starts while assisting Clyso with "a fairly hip and cutting edge company that wanted to transition their HDD-backed Ceph cluster to a 10 petabyte NVMe deployment" using object-based storage devices [or OSDs]...) I can't believe they figured it out first. That was the thought going through my head back in mid-December after several weeks of 12-hour days debugging why this cluster was slow... Half-forgotten superstitions from the 90s about appeasing SCSI gods flitted through my consciousness...

Ultimately they decided to go with a Dell architecture we designed, which quoted at roughly 13% cheaper than the original configuration despite having several key advantages. The new configuration has less memory per OSD (still comfortably 12GiB each), but faster memory throughput. It also provides more aggregate CPU resources, significantly more aggregate network throughput, a simpler single-socket configuration, and utilizes the newest generation of AMD processors and DDR5 RAM. By employing smaller nodes, we halved the impact of a node failure on cluster recovery....

The initial single-OSD test looked fantastic for large reads and writes and showed nearly the same throughput we saw when running FIO tests directly against the drives. As soon as we ran the 8-OSD test, however, we observed a performance drop. Subsequent single-OSD tests continued to perform poorly until several hours later when they recovered. So long as a multi-OSD test was not introduced, performance remained high. Confusingly, we were unable to invoke the same behavior when running FIO tests directly against the drives. Just as confusing, we saw that during the 8 OSD test, a single OSD would use significantly more CPU than the others. A wallclock profile of the OSD under load showed significant time spent in io_submit, which is what we typically see when the kernel starts blocking because a drive's queue becomes full...

For over a week, we looked at everything from bios settings, NVMe multipath, low-level NVMe debugging, changing kernel/Ubuntu versions, and checking every single kernel, OS, and Ceph setting we could think of. None these things fully resolved the issue. We even performed blktrace and iowatcher analysis during "good" and "bad" single OSD tests, and could directly observe the slow IO completion behavior. At this point, we started getting the hardware vendors involved. Ultimately it turned out to be unnecessary. There was one minor, and two major fixes that got things back on track.
It's a long blog post, but here's where it ends up:

• Fix One: "Ceph is incredibly sensitive to latency introduced by CPU c-state transitions. A quick check of the bios on these nodes showed that they weren't running in maximum performance mode which disables c-states."

• Fix Two: [A very clever engineer working for the customer] "ran a perf profile during a bad run and made a very astute discovery: A huge amount of time is spent in the kernel contending on a spin lock while updating the IOMMU mappings. He disabled IOMMU in the kernel and immediately saw a huge increase in performance during the 8-node tests." In a comment below, Nelson adds that "We've never seen the IOMMU issue before with Ceph... I'm hoping we can work with the vendors to understand better what's going on and get it fixed without having to completely disable IOMMU."

• Fix Three: "We were not, in fact, building RocksDB with the correct compile flags... It turns out that Canonical fixed this for their own builds as did Gentoo after seeing the note I wrote in do_cmake.sh over 6 years ago... With the issue understood, we built custom 17.2.7 packages with a fix in place. Compaction time dropped by around 3X and 4K random write performance doubled."

The story has a happy ending, with performance testing eventually showing data being read at 635 GiB/s — and a colleague daring them to attempt 1 TiB/s. They built a new testing configuration targeting 63 nodes — achieving 950GiB/s — then tried some more performance optimizations...

China's Huawei will not support Android apps on the latest iteration of its in-house Harmony operating system, domestic financial media Caixin reported, as the company looks to bolster its own software ecosystem. From a report: The company plans to roll out a developer version of its HarmonyOS Next platform in the second quarter of this year followed by a full commercial version in the fourth quarter, it said in a company statement highlighting the launch event for the platform in its home city of Shenzhen on Thursday.

Huawei first unveiled its proprietary Harmony system in 2019 and prepared to launch it on some smartphones a year later after U.S. restrictions cut its access to Google's technical support for its Android mobile OS. However, earlier versions of Harmony allowed apps built for Android to be used on the system, which will no longer be possible, according to Caixin.

Version 9.0 of Wine, the free and open-source compatibility layer that lets you run Windows apps on Unix-like operating systems, has been released. "Highlights of Wine 9.0 include an experimental Wayland graphics driver with features like basic window management, support for multiple monitors, high-DPI scaling, relative motion events, as well as Vulkan support," reports 9to5Linux. From the report: The Vulkan driver has been updated to support Vulkan 1.3.272 and later, the PostScript driver has been reimplemented to work from Windows-format spool files and avoid any direct calls from the Unix side, and there's now a dark theme option on WinRT theming that can be enabled in WineCfg. Wine 9.0 also adds support for many more instructions to Direct3D 10 effects, implements the Windows Media Video (WMV) decoder DirectX Media Object (DMO), implements the DirectShow Audio Capture and DirectShow MPEG-1 Video Decoder filters, and adds support for video and system streams, as well as audio streams to the DirectShow MPEG-1 Stream Splitter filter.

Desktop integration has been improved in this release to allow users to close the desktop window in full-screen desktop mode by using the "Exit desktop" entry in the Start menu, as well as support for export URL/URI protocol associations as URL handlers to the Linux desktop. Audio support has been enhanced in Wine 9.0 with the implementation of several DirectMusic modules, DLS1 and DLS2 sound font loading, support for the SF2 format for compatibility with Linux standard MIDI sound fonts, Doppler shift support in DirectSound, Indeo IV50 Video for Windows decoder, and MIDI playback in dmsynth.

Among other noteworthy changes, Wine 9.0 brings loader support for ARM64X and ARM64EC modules, along with the ability to run existing Windows binaries on ARM64 systems and initial support for building Wine for the ARM64EC architecture. There's also a new 32-bit x86 emulation interface, a new WoW64 mode that supports running of 32-bit apps on recent macOS versions that don't support 32-bit Unix processes, support for DirectInput action maps to improve compatibility with many old video games that map controller inputs to in-game actions, as well as Windows 10 as the default Windows version for new prefixes. Last but not least, the kernel has been updated to support address space layout randomization (ASLR) for modern PE binaries, better memory allocation performance through the Low Fragmentation Heap (LFH) implementation, and support memory placeholders in the virtual memory allocator to allow apps to reserve virtual space. Wine 9.0 also adds support for smart cards, adds support for Diffie-Hellman keys in BCrypt, implements the Negotiate security package, adds support for network interface change notifications, and fixes many bugs. For a full list of changes, check out the release notes. You can download Wine 9.0 from WineHQ.

Google has formally discontinued its efforts to bring the full Chrome browser experience to its Fuchsia operating system. 9to5Google reports: In 2021, we reported that the Chromium team had begun an effort to get the full Chrome/Chromium browser running on Google's in-house Fuchsia operating system. Months later, in early 2022, we were even able to record a video of the progress, demonstrating that Chromium (the open-source-only variant of Chrome) could work relatively well on a Fuchsia-powered device. This was far from the first time that the Chromium project had been involved with Fuchsia. Google's full lineup of Nest Hub smart displays is currently powered by Fuchsia under the hood, and those displays have limited web browsing capabilities through an embedded version of the browser.

In contrast to that minimal experience, Google was seemingly working to bring the full might of Chrome to Fuchsia. To observers, this was yet another signal that Google intended for Fuchsia to grow beyond the smart home and serve as a full desktop operating system. After all, what good is a laptop or desktop without a web browser? Fans of the Fuchsia project have anticipated its eventual expansion to desktop since Fuchsia was first shown to run on Google's Pixelbook hardware. However, in the intervening time -- a period that also saw significant layoffs in the Fuchsia division -- it seems that Google has since shifted Fuchsia in a different direction. The clearest evidence of that move comes from a Chromium code change (and related bug tracker post) published last month declaring that the "Chrome browser on fuchsia won't be maintained."

Linux Mint 21.3 is now available to download, reports the blog OMG Obuntu.

It's the first version to offer Wayland support in its Cinnamon desktop: Following a successful bout of bug-busting in last month's beta release, Mint devs have gone ahead and rubber-stamped a stable release. Thus, you can reasonably expect to not encounter any major issues when installing or using it... [I]t's based on Ubuntu 22.04 LTS and continues to use the Linux 5.15 kernel by default, but newer kernels are available to install within the OS...

In my own testing I find Cinnamon's Wayland support to be well-rounded. It's not perfect but I didn't hit any major snafus that prevented me from working (though admittedly I did only attempt 'basic' tasks like web browsing, playing music, and adding applets). However, Cinnamon's Wayland support is in an early state, is not enabled by default, and Linux Mint devs expect it won't be good enough for everyone until the 23.x series (due 2026) at the earliest. Still, try it out yourself and see if it works for you. Select the 'Cinnamon on Wayland (Experimental)' session from the login screen session selector, and then login as normal...

Additionally, the latest version of Mozilla Firefox is pre-installed (as a deb, not a Snap)
Among the new features are a whole new category of desktop add-ons — "Actions" — which upgrade the right-clicking context menu. (So for .iso files there's two new choices: "Verify" or "Make bootable USB stick".)

The article says there's also "a raft of smaller refinements," plus "a bevvy of buffs and embellishments" for Linux Mint's homegrown apps.

Any Linux Mint users reading Slashdot? Share your thoughts or experiences in the comments...

Linux kernel 6.7 has been released, including support for the new next-gen copy-on-write (COW) bcachefs file system. The Register reports: Linus Torvalds announced the release on Sunday, noting that it is "one of the largest kernel releases we've ever had." Among the bigger and more visible changes are a whole new file system, along with fresh functionality for several existing ones; improved graphics support for several vendors' hardware; and the removal of an entire CPU architecture. [...] The single biggest feature of 6.7 is the new bcachefs file system, which we examined in March 2022. As this is the first release of Linux to include the new file system, it definitely would be premature to trust any important data to it yet, but this is a welcome change. The executive summary is that bcachefs is a next-generation file system that, like Btrfs and ZFS, provides COW functionality. COW enables the almost instant creation of "snapshots" of all or part of a drive or volume, which enables the OS to make disk operations transactional: In other words, to provide an "undo" function for complex sets of disk write operations.

Having a COW file system on Linux isn't new. The existing next-gen file system in the kernel, Btrfs, also supports COW snapshots. The version in 6.7 sees several refinements. It inherits a feature implemented for Steam OS: Two Btrfs file systems with the same ID can be mounted simultaneously, for failover scenarios. It also has improved quota support and a new raid_stripe_tree that improves handling of arrays of dissimilar drives. Btrfs remains somewhat controversial. Red Hat banished it from RHEL years ago (although Oracle Linux still offers it) but SUSE's distros depend heavily upon it. It will be interesting to see how quickly SUSE's Snapper tool gains support for bcachefs: This new COW contender may reveal unquestioned assumptions built into the code. Since Snapper is also used in several non-SUSE distros, including Spiral Linux, Garuda, and siduction, they're tied to Btrfs as well.

The other widely used FOSS next-gen file system, OpenZFS, also supports COW, but licensing conflicts prevent ZFS being fully integrated into the Linux kernel. So although multiple distros (such as NixOS, Proxmox, TrueNAS Scale, Ubuntu, and Void Linux) support ZFS, it must remain separate and distinct. This results in limitations, such as the ZFS Advanced Read Cache being separate from Linux's page cache. Bcachefs is all-GPL and doesn't suffer from such limitations. It aims to supply the important features of ZFS, such as integrated volume management, while being as fast as ext4 or XFS, and also surpass Btrfs in both performance and, crucially, reliability. A full list of changes in this release can be viewed via KernelNewbies.

A startup called Rabbit sold out of its first batch of pocket AI companions a day after it was debuted at CES 2024. The company announced on X that it sold 10,000 units in just a day. "When we started building r1, we said internally that we'd be happy if we sold 500 devices on launch day," Rabbit writes. "In 24 hours, we already beat that by 20x!" The Verge reports: Rabbit introduced the R1 during CES on Tuesday, which comes with a small 2.88-inch touchscreen that runs on the company's own Rabbit OS. It uses a "Large Action Model" that works as a "sort of universal controller for apps," according to my colleague David Pierce, who got to try out the device during the showcase. This allows it to do things like play music, buy groceries, and send messages through a single interface without having to use your phone. It also lets you train the device how to interact with a certain app. A second batch is available for preorder from Rabbit's website with an expected delivery date between April and May 2024. The first batch of products are expected to start shipping in March.

prisoninmate shares a report: Originally released on November 12th, 2017, the long-term supported (LTS) Linux 4.14 kernel series has now reached its end of supported life after being maintained for more than six years. Renowned kernel developer Greg Kroah-Hartman announced today on the Linux kernel mailing list the release of Linux 4.14.336 as what appears to be the last maintenance update to the long-term supported Linux 4.14 kernel series, which is now marked as EOL (End of Life) on the kernel.org website. "This is the LAST 4.14.y kernel to be released. It is now officially end-of-life. Do NOT use this kernel version anymore, please move to a newer one, as shown on the kernel.org releases page," said Greg Kroah-Hartman. "If you are stuck at this version due to a vendor requiring it, go get support from that vendor for this obsolete kernel tree, as that is what you are paying them for."

If you're starting the new year with a new Linux distro, ZDNet just ran an enthusiastic profile of Rhino Linux, calling it "beautiful" with "one of the more useful command-line package managers on the market." Rhino uses a modern take on the highly efficient and customizable Xfce desktop (dubbed "Unicorn") to help make the interface immediately familiar to anyone who logs in. You'll find a dock on the left edge of the screen that contains launchers for common applications, access to the Application Grid (where you can find all of your installed software), and a handy Search Bar (Ulauncher) that allows you to quickly search for and launch any installed app (or even the app settings) you need...

Thanks to myriad configuration options, Xfce can be a bit daunting. At the same time, the array of settings makes Xfce highly customizable, which is exactly what the Rhino developers did when they designed this desktop. For those who want a desktop that makes short work of accessing files, the Rhino developers have added a really nifty tool to the top bar. You'll find a listing of some folders you have in your Home directory (Files, Documents, Music, Pictures, Video). If you click on one of those entries, you'll see a list of the most recently accessed files within the directory. Click on the file you want to open with the default, associated application...

Rhino opts for the Pacstall package manager over the traditional apt-get. That's not to say apt-get isn't on the system — it is. But with Rhino Linux, there's a much easier path to getting the software you want installed... [W]hen you first run the installed OS, you are greeted with a window that allows you to select what package managers you want to use. You can select from Snap, Flatpak, and AppImages (or all three). Next, the developers added a handy tool (rhino-pkg) that makes installing from the command line very simple.
When the distro launched in August, 9to5Linux described it as "a unique distribution for Ubuntu fans who wanted a rolling-release system where they install once and receive updates forever." The theming looks gorgeous and it's provided by the Elementary Xfce Darker icon theme, Xubuntu's Greybird GTK theme, and Ubuntu's Yaru Dark WM theme. It also comes with some cool features, such as a dedicated and full-screen desktop switcher provided by Xfdashboard...

Klaus Zimmermann (a self-described "friendly hacker") recently posted a "State of the Distro" post, choosing his favorite distributions for things like portable installation from a USB drive (Alpine Linux) and for a desktop OS (Debian Linux or Devuan).

But when it comes to a distro for the Raspberry Pi, (at least until the 4), Zimmerman argues that FreeBSD's performance is "unlike any other Linux distribution I've ever seen, even with cpupower activated and overclocking." Nope, no match — FreeBSD's performance on the Pi is still way better, even without overclocking. You can browse a modern web, have things scroll smoothly, watch videos and even play some 3D games like Quake with it! And if you overclock it a little (2GHz) you can even make it run that gargantua MS Teams.

But what about all that lackluster driver support? WiFi drivers still on the 802.11g standard and all? Surely you can't be serious about it when Linux offers all that support out of the box, right? Wrong, actually. For starters, the drivers provided for the Pi's hardware are often half-assed proprietary blobs... I no longer think FreeBSD is really at fault if the driver support for the hardware is not helpful to begin with. Even drivers you find for Linux are shaky at best.

So yes, I will keep using FreeBSD on the Pi. As a desktop. With USB WiFi and audio adapters for those services, because the existing hardware is sort of moot even otherwise. And with those USB adapters — and FreeBSD — the Pi works really well, truly desktop-like.
I'd be curious to hear from Slashdot's readers about their own experiments with Linux (and FreeBSD) on a Raspberry Pi. Zimmerman's final winner, for the "Server" category, was Debian — though of his two servers, one is just an XMPP server set up on a Raspberry Pi. "I found that using Debian on the Pi is a real joy. Easy and simple to set up, familiar environment and all. So I'm keeping it.

"This concept is about to be overshadowed, however, by my growing like of FreeBSD lately..."


Thanks to long-time Slashdot reader walterbyrd for sharing the article.